Web Version Tape Information Vishay Siliconix MICRO FOOTr 3x2: 0.5-mm PITCH, 0.165-mm BUMP HEIGHT (DG3000-T1, DG3001-T1, DG3003-T1, DG3003-T1) 4.00"0.10 4.00"0.10 +0.10 O1.50−0.00 A 2.00"0.05 B B 1.75 " 0.1 3.5 " 0.05 8.0 +0.30 −0.10 SECTION A-A A SECTION B-B NOTES: 1. 10 sprocket hole pitch cumulative tolerance "0.2 mm. 2. Camber not to exceed 1 mm in 100 mm. 3. Material: Black conductive or black static dissipative 4. It should be measured from: a. sprocket hole to pocket center and b. sprocket hole to pocket hole 5. All sizes in mm unless specified. 6. Use seal tape with 9.3-mm width (See Note 8, drawing 92−5210-x) QUANTITY PER REEL T1 3000 ECN: T-05350—Rev. E, 13-Jun-04 DWG: 93-5221-x Document Number: 70754 08-Jun-05 www.vishay.com 1