© Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 ■ Overview ■ Configuration Installation 4 Pointek CLS500 is an inverse frequency shift capacitance level and material detection switch ideal for detecting interfaces, solids, liquids, toxic, and aggressive chemicals in critical conditions of high temperature and pressure. CLS500 also has the ability to tune out buildup on the probe. Keep unit out of path of falling material, or protect probe from falling material. ■ Benefits • Active-Shield technology so measurement is unaffected by material buildup in active shield section • 2-wire loop powered with solid-state switch or 4 to 20/20 to 4 mA output • Simple push-button calibration and integrated local display • Full function diagnostics • HART communications for remote commissioning and inspection Build up of material in active shield area does not affect switch operation. ■ Application Active-Shield technology ensures that measurement is unaffected by vapors, product deposits, dust, and condensation. The unique mechanical probe design coupled with a high performance transmitter gives superior performance in a wide range of level detection applications. Pointek CLS500’s microprocessor-based electronics provide one-point calibration, making setup possible without shutting down your production process. • Key Applications: foam or liquid/foam level, glycol regenerators, high-pressure coalescers, LNG applications 50 (2) Install probe at least 50 (2) from tank wall. Pointek CLS500 installation, dimensions in mm (inch) Siemens FI 01 · 2016 4/63 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 ■ Technical specifications Design Input Measuring range 0 ... 330 pF Span Min. 1 pF Material • Wetted parts material - Standard rod • Probe isolation (rod) Output Solid-state switch • Output • Protection • Max. switching voltage • Max. load current • Voltage drop • Time delay (pre or post switching) 4 Galvanically isolated Against reversed polarity (bipolar) • 30 V (DC) • 30 V peak (AC) 82 mA < 1 V, typical at 50 mA 1 ... 60 s Probe diameter • Standard rod version (PFA) • High temperature rod version (Stainless steel) Probe length • Standard rod version (PFA) • High temperature rod version (Stainless steel) 4 ... 20 mA/20 ... 4 mA Current loop Accuracy (transmitter) Temperature stability 0.15 pF (0 pF) or < 0.25 % (typical < 0.1 %) of actual measurement value, whichever is greater over the full temperature range Non-linearity and repeatability 0.1 % of full scale and actual measurement respectively Accuracy Deviation < 0.1 % of measured value Rated operating conditions1) Installation conditions • Location Ambient conditions • Ambient temperature (transmitter) • Installation category • Pollution degree Medium conditions • Relative dielectric constant r • Process temperature - Standard (PFA) - High temperature stainless steel version with thermal isolator - Cryogenic version3) Process pressure Indoor/outdoor -40 ... +85 °C (-40 ... +185 I 4 °F)2) Min. 1.5 Temperature ratings are pressure dependent. See Pressure/Temperature curves on page 4/71. -50 ... +200 °C (-58 ... +392 °F) -60 ... +400 °C (-76 ... +752 °F) -200 ... +200 °C (-328 ... +392 °F) Pressure rating of process seal is temperature dependent. See Pressure/Temperature curves on page 4/71. -1 ... +150 bar g • Standard (PFA) (-14.6 ... +2 175 psi g) • High temperature version (Stainless -1 ... +35 bar g (-14.6 ... +507.6 psi g) steel) Process connection of probe • Threaded mounting • Flange mounting Enclosure • Material 316L stainless steel PFA 16 mm (0.63 inch) 19 mm (0.75 inch) Max. 1 000 mm (39.4 inch) with 16 mm (0.63 inch) diameter probe Max. measuring length 1 000 mm (39.4 inch) with 19 mm (0.75 inch) diameter probe NPT [(Taper), ANSI/ASME B1.20.1] R [(BSPT), EN 10226/PT (JIS-T), JIS B 0203] G [(BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202] ASME, EN 1092-1 • Cable inlet • Degree of protection Aluminum, epoxy-coated (stainless steel option available3)) 2 x ½" NPT Type 4X/NEMA4X/IP65, IP68 Power supply Max. 33 V DC Features Measurement current signaling NAMUR NE 43 Safety • Inputs/outputs fully galvanically isolated • Polarity-insensitive current loop • Fully potted • Integrated safety barrier Primary variable (PV) out of limits, system failure in measurement circuit, deviation between A/D and D/A converter, check sum, watch dog and self-checking facility Positions 0 ... 9, A ... F Conforming to HART Communication Foundation (HCF) • Diagnostics with fault alarm when: • Function rotary switch • SMART communication Certificates and approvals General Purpose Non incendive/Non sparking Dust Ignition Proof Explosion Proof Marine 1) CE, CSA/FM, RCM CSA/FM Class I, Div. 2, Groups A, B, C, D T4 ATEX II 3G 2D EEx n A [ib] IIC T6 ... T4 T100 °C CSA/FM Class II and III, Div. 1, Groups E, F, G T4 ATEX II 1/2 GD EEx d [ia] T6 ... T1 T100 °C FM Class I, Div. 1, Groups A, B, C, D T4 ATEX II 1/2 GD EEx d [ia] IIC T6 ... T1 T100 °C Lloyds Register of Shipping, Categories ENV1, ENV2, ENV3, ENV5, Bureau Veritas When operation is in areas classified as hazardous, observe restrictions according to relevant certificate. See also Pressure/Temperature curves on page 4/71. 2) Thermal isolator is used if process connection temperature exceeds 85 °C (185 °F) 3) Customers interested in a custom designed device should consult a local sales person. For more information, please visit http:// www.automation.siemens.com/aspa_app. 4/64 Siemens FI 01 · 2016 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Pointek CLS500 probe version Standard HT Series Process connection types Standard (PFA) (7ML5601, 7ML5602, 7ML5603) High Temperature (Stainless steel) (7ML5604) Threaded Available as standard – Flange Available as standard Available as standard Available as standard Available as standard None – HT Stainless: available as standard PFA Available as standard – 1 000 mm (40 inch) 1 000 mm (40 inch) Max. process pressure 150 bar g (2 175 psi g) Stainless steel2): 35 bar g (507 psi g) Max. process temperature 200 °C (392 °F) 400 °C (752 °F) Process connection materials 316L stainless steel Probe insulation Length parameters Max. rod length Process condtitions1) 4 1) When operation is in areas classified as hazardous, observe restrictions according to relevant certificate. See also Pressure/Temperature curves on page 4/71. Pressure rating of process seal is temperature dependent. See Pressure/Temperature curves on page 4/71. 2) Pressure rating of process seal is temperature dependent. See Pressure/Temperature curves on page 4/71. – Not available as standard Siemens FI 01 · 2016 4/65 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Selection and Ordering data Article No. Selection and Ordering data Pointek CLS500, threaded Inverse frequency shift capacitance level and material detection switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of extreme temperature and pressure. CLS500 also has the ability to tune out buildup on the probe. 7ML5601- Further designs 77 7 77 - 77 A 0 Please add "-Z" to Article No. and specify Order code(s). Total insertion length: enter the total insertion length in plain text description 4 Y01 Note: The difference between Y01 and Y02 must be a minimum of 150 mm Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Electronic transmitter No transmitter supplied MSP 2002-1 (330 pF) Order code 0 1 Active Shield length - minimum length is 50 mm Y02: to mm1) Y02 Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]: Measuring-point number/identification (max. 27 characters) specify in plain text Y15 Process connection ¾" 1" 1¼" A B C Manufacturer's test certificate: M to DIN 55350, Part 18 and to ISO 9000 C11 Inspection Certificate Type 3.1 per EN 10204 C12 1½" 2" D E Operating Instructions Threaded connection and rating NPT [(Taper), ANSI/ASME B1.20.1] R [(BSPT), EN 10226/PT (JIS-T) JIS B 0203] G [(BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202] Probe insulation/material of process connection PFA insulation/316L stainless steel A B D 1 1 2 ATEX II 1/2 GD EEx d [ia] IIC T6 ... T1 T100 °C FM Class I, Div. 1, Groups A, B, C, D T4 4 6 Thermal isolator/remote version Rigid thermal isolator [for process connection temperature over 85 °C (185 °F)] No thermal isolator 1) Add Order code Y01 and Y02 in plain text: "Insertion/active shield length to mm" 4/66 Siemens FI 01 · 2016 See page 4/70 Pointek Specials See page 4/79 1) Approvals General Purpose: CE, CSA/FM, RCM CSA/FM Class I, Div. 2, Groups A, B, C, D T4; ATEX II 3GD 2D EEx nA [ib] IIC T6 ... T4 T100 °C; CSA/FM Class II and III Div. 1, Groups E, F, G T4 Probe/electrode diameter 16 mm (0.63 inch) rigid rod, minimum insertion length 200 mm (7.9 inch), maximum insertion length 1 000 mm (39.4 inch)1) Note: The Operating Instructions should be ordered as a separate line on the order. This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and manual library. 1 A B See dimension drawings on page 4/76 for further explanation of Y02 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Selection and Ordering data Article No. Selection and Ordering data Pointek CLS500, welded flange Inverse frequency shift capacitance level and material detection switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of extreme temperature and pressure. CLS500 also has the ability to tune out buildup on the probe. 7ML5602- Further designs Please add "-Z" to Article No. and specify Order code(s). 77 7 77 - 77 A 0 Order code Total insertion length: enter the total insertion length in plain text description Y01 Active Shield length - minimum length is 50 mm. Y02: to mm1) Y02 Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]: Measuring-point number/identification (max. 27 characters) specify in plain text Y15 Manufacturer's test certificate: M to DIN 55350, Part 18 and to ISO 9000 C11 AA AB BA BB Inspection Certificate Type 3.1 per EN 10204 C12 4" ASME, 150 lb1) 4" ASME, 300 lb1) 6" ASME, 150 lb1) 6" ASME, 300 lb1) Welded flange, 316L stainless steel, Type A flat faced DN 50 PN 16 DN 50 PN 40 DN 80 PN 16 CA CB DA DB This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and manual library. DN 80 PN 40 DN 100 PN 161) DN 125 PN 161) (Note: Flange bolting patterns and facings dimensionally correspond to the applicable ASME B16.5 or EN 1092-1 standard.) FD GC HC Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Electronic transmitter MSP 2002-1 (330 pF) Process connection and pressure rating Welded flange, 316L stainless steel, raised face 2" ASME, 150 lb 2" ASME, 300 lb 3" ASME, 150 lb 3" ASME, 300 lb1) Probe insulation/material of process connection PFA insulation/316L stainless steel Approvals General Purpose CSA/FM Class I, Div. 2, Groups A, B, C, D T4; ATEX II 3GD 2D EEx nA [ib] IIC T6 ... T4 T100 °C; CSA/FM Class II and III Div. 1, Groups E, F, G T4 ATEX II 1/2 GD EEx d [ia] IIC T6 ... T1 T100 °C FM Class I, Div. 1, Groups A, B, C, D T4 Probe/electrode diameter 16 mm (0.63 inch) rigid rod, min. length 200 mm (7.9 inch), max. length 1 000 mm (39.4 inch) Thermal isolator Rigid thermal isolator [for process temperature over 85 °C (185 °F)] No thermal isolator 1) 1 Operating Instructions Note: The Operating Instructions should be ordered as a separate line on the order. Pointek Specials 1) See page 4/70 See page 4/79 See dimensional drawings on page 4/77 for further explanation of Y02 EC ED FC 1 1 2 4 6 1 A B Custom shipping methods required. Contact factory for more details. Siemens FI 01 · 2016 4/67 4 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Selection and Ordering data Pointek CLS500, single piece flange Inverse frequency shift capacitance level and material detection switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of extreme temperature and pressure. CLS500 also has the ability to tune out buildup on the probe. Article No. Selection and Ordering data 7ML560377 7 77 - 77 A 0 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Electronic transmitter MSP 2002-1 (330 pF) 4 1 Process connection and pressure rating Single piece flange, 316L stainless steel, raised face 2" ASME, 150 lb 2" ASME, 300 lb AA AB 3" ASME, 150 lb 3" ASME, 300 lb1) BA BB 4" ASME, 150 lb1) 4" ASME, 300 lb1) CA CB 6" ASME, 150 lb1) 6" ASME, 300 lb1) Single piece flange, 316L stainless steel, Type B1 raised faced DA DB DN 50 PN 16 DN 50 PN 25 EC ED DN 80 PN 16 DN 80 PN 25 FC FD DN 100 PN 161) DN 100 PN 251) GC GD DN 125 PN 161) DN 125 PN 251) HC HD Probe insulation/material of process connection PFA insulation/316L stainless steel 1 ATEX II 1/2 GD EEx d [ia] IIC T6 ... T1 T100 °C FM Class I, Div. 1, Groups A, B, C, D T4 4 6 1 Thermal isolator Rigid thermal isolator [for process connection temperature over 85 °C (185 °F)] No thermal isolator Custom shipping methods required. Contact factory for more details 4/68 Siemens FI 01 · 2016 Y01 Active Shield length - minimum length is 50 mm. Y02: to mm1) Y02 Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]: Measuring-point number/identification (max. 27 characters) specify in plain text Y15 Manufacturer's test certificate: M to DIN 55350, Part 18 and to ISO 9000 C11 Inspection Certificate Type 3.1 per EN 10204 C12 Note: The Operating Instructions should be ordered as a separate line on the order. This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and manual library. See page 4/70 Accessories See page 4/79 1) 1 2 1) Total insertion length: enter the total insertion length in plain text description Operating Instructions Approvals General Purpose: CE, CSA/FM, RCM CSA/FM Class I, Div. 2, Groups A, B, C, D T4; ATEX II 3GD 2D EEx nA [ib] IIC T6 ... T4 T100 °C; CSA/FM Class II and III Div. 1, Groups E, F, G T4 Probe/electrode diameter 16 mm (0.63 inch) rigid rod, maximum length 1 000 mm (39.4 inch) (Y01) Order code Further designs Please add "-Z" to Article No. and specify Order code(s). A B See dimensional drawings on page 4/77 for further explanation of Y02 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Selection and Ordering data Article No. Selection and Ordering data Article No. Pointek CLS500 High temperature Inverse frequency shift capacitance level and material detection switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of extreme temperature and pressure. CLS500 also has the ability to tune out buildup on the probe. 7ML5604- Pointek CLS500 High temperature Inverse frequency shift capacitance level and material detection switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of extreme temperature and pressure. CLS500 also has the ability to tune out buildup on the probe. 7ML5604- 7A 7 77 - 7777 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Electronic transmitter None5) MSP 2002-1 (330 pF) Probe material of process connection No insulation/316L stainless steel3)4) 1 Stilling well No stilling well 0 1 Process connection and pressure rating 316L stainless steel, raised face1) 2" ASME, 150 lb 2" ASME, 300 lb 2" ASME, 600 lb 2" ASME, 900 lb A1 A2 A3 A4 3" ASME, 150 lb 3" ASME, 300 lb2) 3" ASME, 600 lb2) 3" ASME, 900 lb2) B1 B2 B3 B4 4" ASME, 150 lb2) 4" ASME, 300 lb2) 4" ASME, 600 lb2) 4" ASME, 900 lb2) C1 C2 C3 C4 lb2) 7 A 7 77 - 7777 6" ASME, 150 6" ASME, 300 lb2) 6" ASME, 600 lb2) 6" ASME, 900 lb2) 316L stainless steel, Type B1 flat faced D1 D2 D3 D4 DN 50 PN 16 DN 50 PN 25 DN 50 PN 40 DN 50 PN 63 E1 E2 E3 E4 DN 80 PN 16 DN 80 PN 25 DN 80 PN 402) DN 80 PN 632) F F F F DN 100 PN 162) DN 100 PN 252) DN 100 PN 402) DN 100 PN 642) G1 G2 G3 G4 DN 125 PN 162) DN 125 PN 252) DN 125 PN 402) DN 125 PN 642) (Note: Flange bolting patterns and facings dimensionally correspond to the applicable ASME B16.5 or EN 1092-1 standard.) H1 H2 H3 H4 0 Approvals General Purpose CSA/FM Class I, Div. 2, Groups A, B, C, D T4; ATEX II 3GD 2D EEx nA [ib] IIC T6 ... T4 T100 °C; CSA/FM Class II and III Div. 1, Groups E, F, G T4 A B ATEX II 1/2 GD EEx d [ia] IIC T6 ... T1 T100 °C FM Class I, Div. 1, Groups A, B, C, D T4 D F Probe/electrode diameter Maximum length 1 000 mm (39.37 inch)4) Thermal isolator Rigid thermal isolator [for process connection temperature over 85 °C (185 °F)] 4 A 1 1) Welded flange for no insulation option only 2) Custom shipping methods required 3) Non-conductive material only, stainless steel non-insulated probe diameter 19 mm (0.75 inch) 4) Add Order code Y01 and Y02 in plain text: "Insertion/active shield length to mm" Minimum insertion length depends on probe version selected. See dimensional drawings on page 4/76 for more details 5) Only available with Approvals option A 1 2 3 4 Siemens FI 01 · 2016 4/69 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Selection and Ordering data Order code Further designs Please add "-Z" to Article No. and specify Order code(s). 4 Total insertion length: enter the total insertion length in plain text description Y01 Active Shield length - minimum length is 50 mm. Y02: to mm1) Y02 Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]: Measuring-point number/identification (max. 27 characters) specify in plain text Y15 Manufacturer's test certificate: M to DIN 55350, Part 18 and to ISO 9000 C11 Inspection Certificate Type 3.1 per EN 10204 C12 Operating Instructions Article No. English 7ML1998-5GG03 German 7ML1998-5GG32 Note: The Operating Instructions should be ordered as a separate line on the order. All literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and Operating Instructions library. Accessories General Purpose 1/2" NPT General Purpose Cable Entry IP68/IP69K NEMA6, -40 ... +100 °C (-40 ... +212 °F), cable size 6 ... 12 mm (0.236 ... 0.472 inch) 7ML1830-1JA M20 x 1.5 General Purpose Cable Entry IP68/IP69K NEMA6, -40 ... +100 °C (-40 ... +212 °F), cable size 7 ... 12 mm (0.275 ... 0.472 inch) 7ML1830-1JC Transmitter, MSP 2002-1, 330 PF 7ML1830-1JP Hazardous Locations 1/2" NPT EMC rated Cable Gland: Dust Ignition Proof, 7ML1830-1JB Flameproof Exd, and Increased Safety ATEX II 2 GD ExtD A21 (Zone 1, Zone 2, Zone 21, Zone 22, and in Gas Groups IIA,IIB, and IIC) -60 ... +80 °C IP66, IP67, IP68, NEMA4X, cable sizes 5.5 ... 12 mm (0.216 ... 0.472 inch) M20 EMC rated Cable Gland: Dust Ignition Proof, Flameproof Exd, and Increased Safety ATEX II 2 GD ExtD A21 (Zone 1, Zone 2, Zone 21, Zone 22, and in Gas Groups IIA,IIB and IIC) -60 ... +80 °C IP66, IP67, IP68, NEMA4X, cable sizes 5.5 ... 12 mm (0.216 ... 0.472 inch) 7ML1830-1JD Pointek Specials See page 4/79 1) See dimensional drawings on page 4/77 for further explanation of Y02 4/70 Siemens FI 01 · 2016 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 ■ Characteristic curves Pressure/temperature curve CLS500 rod probes Threaded process connections (7ML5601) Permitted operating pressures P 150 bar (2.175 psi) 140 bar (2.030 psi) 130 bar (1.885 psi) 4 120 bar (1.740 psi) 110 bar (1.595 psi) 100 bar (1.450 psi) 90 bar (1.305 psi) 80 bar (1.160 psi) 70 bar (1.015 psi) 60 bar (870 psi) 50 bar (725 psi) 40 bar (580 psi) 30 bar (435 psi) 20 bar (290 psi) Atmospheric 10 bar (145 psi) -40 ºF 14 ºF (-40 ºC)(-10 ºC) -1 bar (-14.5 psi) -150 ºC (-238 ºF) -100 ºC -50 ºC (-148 ºF) (-58 ºF) 100 ºF (38 ºC) 0 ºC RT 50 ºC (32 ºF) (122 ºF) 200 ºF (93 ºC) 100 ºC (212 ºF) -29 ºC (-20 ºF) 300 ºF (149 ºC) 150 ºC (302 ºF) 400 ºF (204 ºC) 200 ºC (392 ºF) 500 ºF (260 ºC) 250 ºC (482 ºF) 600 ºF (315 ºC) 300 ºC (572 ºF) 700 ºF (371 ºC) 350 ºC 400 ºC (662 ºF) (752 ºF) Permitted operating temperature T Example: Permitted operating pressure = 137 bar (1988 psi) at 75 °C Pointek CLS500 process pressure/temperature derating curves (7ML5601) Siemens FI 01 · 2016 4/71 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Pressure/temperature curve CLS500 rod probes ASME flanged process connections (7ML5602 and 7ML5603) Permitted operating pressures P 150 bar (2.175 psi) 140 bar (2.030 psi) 130 bar (1.885 psi) 120 bar (1.740 psi) 4 110 bar (1.595 psi) 100 bar (1.450 psi) 90 bar (1.305 psi) 80 bar (1.160 psi) 70 bar (1.015 psi) 60 bar (870 psi) 50 bar (725 psi) 40 bar (580 psi) 30 bar (435 psi) ASME 300 lb1) 20 bar (290 psi) -40 ºF 14 ºF (-40 ºC)(-10 ºC) -1 bar (-14.5 psi) -150 ºC (-238 ºF) ASME 150 lb1) 10 bar (145 psi) Atmospheric -100 ºC -50 ºC (-148 ºF) (-58 ºF) 100 ºF (38 ºC) 0 ºC RT 50 ºC (32 ºF) (122 ºF) 200 ºF (93 ºC) 100 ºC (212 ºF) 300 ºF (149 ºC) 150 ºC (302 ºF) -29 ºC (-20 ºF) 1) The curve denotes the minimum allowable flange class for the shaded area below. Pointek CLS500 process pressure/temperature derating curves (7ML5602 and 7ML5603) 4/72 Siemens FI 01 · 2016 400 ºF (204 ºC) 200 ºC (392 ºF) 500 ºF (260 ºC) 250 ºC (482 ºF) 600 ºF (315 ºC) 300 ºC (572 ºF) 700 ºF (371 ºC) 350 ºC 400 ºC (662 ºF) (752 ºF) Permitted operating temperature T © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Pressure/temperature curve CLS500 rod probes EN flanged process connections (7ML5602 and 7ML5603) Permitted operating pressures P 150 bar (2.175 psi) 140 bar (2.030 psi) 130 bar (1.885 psi) 120 bar (1.740 psi) 4 110 bar (1.595 psi) 100 bar (1.450 psi) 90 bar (1.305 psi) 80 bar (1.160 psi) 70 bar (1.015 psi) 60 bar (870 psi) 50 bar (725 psi) 40 bar (580 psi) 30 bar (435 psi) 20 bar (290 psi) PN 251) Atmospheric -40 ºF 14 ºF (-40 ºC)(-10 ºC) -1 bar (-14.5 psi) -150 ºC (-238 ºF) PN 161) 10 bar (145 psi) -100 ºC -50 ºC (-148 ºF) (-58 ºF) 100 ºF (38 ºC) 0 ºC RT 50 ºC (32 ºF) (122 ºF) 200 ºF (93 ºC) 100 ºC (212 ºF) 300 ºF (149 ºC) 150 ºC (302 ºF) -29 ºC (-20 ºF) 1) 400 ºF (204 ºC) 200 ºC (392 ºF) 500 ºF (260 ºC) 250 ºC (482 ºF) 600 ºF (315 ºC) 300 ºC (572 ºF) 700 ºF (371 ºC) 350 ºC 400 ºC (662 ºF) (752 ºF) Permitted operating temperature T The curve denotes the minimum allowable flange class for the shaded area below. Pointek CLS500 process pressure/temperature derating curves (7ML5602 and 7ML5603) Siemens FI 01 · 2016 4/73 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Pressure/temperature curve CLS500 high temperature (no insulation) ASME flanged process connections (7ML5604) Permitted operating pressures P 90 bar (1.305 psi) 80 bar (1.160 psi) 70 bar (1.015 psi) 4 60 bar (870 psi) ASME 600 lb1) 50 bar (725 psi) 40 bar (580 psi) 30 bar (435 psi) ASME 300 lb1) 20 bar (290 psi) ASME 150 lb1) 10 bar (145 psi) Atmospheric -40 ºF 14 ºF (-40 ºC) (-10 ºC) -1 bar (-14.5 psi) -150 ºC (-238 ºF) -100 ºC -50 ºC (-148 ºF) (-58 ºF) 100 ºF (38 ºC) 0 ºC RT 50 ºC (32 ºF) (122 ºF) 200 ºF (93 ºC) 100 ºC (212 ºF) 300 ºF (149 ºC) 150 ºC (302 ºF) -29 ºC (-20 ºF) 1) The curve denotes the minimum allowable flange class for the shaded area below. Pointek CLS500 process pressure/temperature derating curves (7ML5604) 4/74 Siemens FI 01 · 2016 400 ºF (204 ºC) 200 ºC (392 ºF) 500 ºF (260 ºC) 250 ºC (482 ºF) 600 ºF (315 ºC) 300 ºC (572 ºF) 700 ºF (371 ºC) 350 ºC 400 ºC (662 ºF) (752 ºF) Permitted operating temperature T © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Pressure/temperature curve CLS500 high temperature (no insulation) EN flanged process connections (7ML5604) Permitted operating pressures P 40 bar (580 psi) 30 bar (435 psi) PN 401) 20 bar (290 psi) PN 251) Atmospheric 10 bar (145 psi) -40 ºF 14 ºF (-40 ºC) (-10 ºC) -1 bar (-14.5 psi) -150 ºC (-238 ºF) -100 ºC -50 ºC (-148 ºF) (-58 ºF) PN 161) 100 ºF (38 ºC) 0 ºC RT 50 ºC (32 ºF) (122 ºF) 200 ºF (93 ºC) 100 ºC (212 ºF) 300 ºF (149 ºC) 150 ºC (302 ºF) -29 ºC (-20 ºF) 1) 400 ºF (204 ºC) 200 ºC (392 ºF) 500 ºF (260 ºC) 250 ºC (482 ºF) 600 ºF (315 ºC) 300 ºC (572 ºF) 700 ºF (371 ºC) 350 ºC 400 ºC (662 ºF) (752 ºF) Permitted operating temperature T The curve denotes the minimum allowable flange class for the shaded area below. Pointek CLS500 process pressure/temperature derating curves (7ML5604) Siemens FI 01 · 2016 4/75 4 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 ■ Dimensional drawings Standard rod version Threaded (7ML5601) 205 (8.1) Standard configuration (7ML5601) Transmitter/ electronics Inactive tip Ø16 (0.63) Pointek CLS500 threaded process connections, dimensions in mm (inch) 4/76 Siemens FI 01 · 2016 With thermal isolator option (all versions) 270 (10.6) With explosion-proof seal option (all versions) Thermal isolator 430 (16.9) 30 (1.18) PFA insulated probe 1/2" NPT: 230 (9.1) Measuring length 4 Y02 Y01 (insertion length) min. = 200 (7.87) / max. = 1 000 (39.37) 20 (0.79) © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 Standard Rod version Welded Flange (7ML5602) Single Piece Flange (7ML5603) 205 (8.1) Standard configuration (7ML5602, 7ML5603) Transmitter/ electronics With thermal isolator option (all versions) 4 430 (16.9) 270 (10.6) With explosion-proof seal option (all versions) Measuring length1) 30 (1.18) PFA insulated probe Y021) Y01 (insertion length) min. = 200 (7.87)/max. = 1 000 (39.37) ½" NPT: 230 (9.1) Thermal isolator Inactive tip Ø16 (0.63) High temperature rod version Welded Flange (7ML5604), Stainless steel rod 4) Flange Facing (raised face) Flange Class Thermal isolator Facing thickness ASME 150/300 2 (0.08) ASME 600/900 7 (0.28) PN16/25/40/64 2 (0.08) Notes: 1) Min. Y02 (active shield length) = 50 (1.96) Min. Y02 (active shield length) = 138 (5.43) 3) Min. Y02 (active shield length) = 100 (3.94) 4) Non conductive materials only Stainless steel probe Measuring Y02 2) length2) Y01 (insertion length) min. = 244 (9.61)/max. = 1 000 (39.37) 2) Insertion length does not include any raised face/gasket face dimension (see Flange Facing Table above) Ø19 (0.75) Pointek CLS500 flanged process connections, dimensions in mm (inch) Siemens FI 01 · 2016 4/77 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS500 ■ Schematics Ground lug Protective label Solid state switch relay (any polarity) Instrument system ground Measuring signal (minicoaxial cable) Type: Ser.: Date: Rev.: Tampering voids warranty 4 Ground connection point for instrument system Pointek CLS500 connections 4/78 Siemens FI 01 · 2016 4 ... 20 mA current loop connection (any polarity) © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS Specials ■ Selection and ordering data Pointek Specials1) Pointek Specials1) Article No. Article No. Kit, sensor for cable units, PPS, digital, FKM A5E01163678 Kit, sensor for cable units, PPS, standard, FFKM A5E01163679 Kit, sensor for cable units, PPS, digital, FFKM A5E01163680 Kit, sensor for cable units, PVDF, standard, FKM A5E01163681 Kit, sensor for cable units, PVDF, digital, FKM A5E01163682 CLS100 Miscellaneous Parts Custom length of cable is available only for 7ML5501-xxx1x and 7ML5501-xxx5x2) Kit, sensor for cable units, PVDF, standard, FFKM A5E01163683 CLS200 Gasket (IP65), Synprene Kit, sensor for cable units, PVDF, digital, FFKM A5E01163684 CLS100 Polycarbonate Lid and Gasket, FKM Kit, Lid and gasket, CLS100 enclosure version A5E01163671 CLS200 Mounting Bracket, 316L stainless steel Spare gasket, enclosure version (IP65 versions only) A5E01163672 CLS200 Gasket (IP68), Silicone Spare mounting bracket A5E01163685 CLS200 PROFIBUS Connector (IP65) Spare gasket, enclosure version (IP68 versions) A5E01163673 Spare, PROFIBUS connector (IP65 versions only) CLS200 Blind Lid A5E01163686 CLS200 Miscellaneous Parts CLS200 with FFKM O-rings (any version)2) CLS200 Electronics Spare aluminum blind lid (for standard versions only) A5E01163674 CLS200 Lid with window Test magnet, digital version 7ML1830-1JE Amplifier/power supply kit, standard version A5E03251681 Amplifier/power supply, digital version 7ML1830-1JF LCD display, digital version 7ML1830-1JK CLS300 Cable Extensions, 316L stainless steel Spare aluminum lid with window A5E01163676 CLS200 Sensor Kit for cable units Kit, sensor for cable units, PPS, Standard, FKM A5E01163677 Kit, stainless steel cable extension, 1 m, adjustable by customer A5E01163688 Kit, stainless steel cable extension, 3 m, adjustable by customer A5E01163689 Kit, stainless steel cable extension, 5 m, adjustable by customer A5E01163690 Kit, stainless steel cable extension, 10 m, adjustable by customer A5E01163691 Kit, stainless steel cable extension, 15 m, adjustable by customer A5E01163693 Kit, stainless steel cable extension, 20 m, adjustable by customer A5E01163695 Siemens FI 01 · 2016 4/79 4 © Siemens AG 2016 Level Measurement Point level measurement - RF Capacitance switches Pointek CLS Specials Pointek Specials1) Pointek Specials1) Article No. CLS300 Cable Extensions, 316 stainless steel with PFA coating 4 Article No. CLS300 Electronics Kits with drivers (for rod or cable versions) Kit, PFA cable extension, 1 m, adjustable by customer A5E01163697 Kit, PFA cable extension, 3 m, adjustable by customer A5E01163698 Kit, PFA cable extension, 5 m, adjustable by customer A5E01163699 Kit, PFA cable extension, 10 m, adjustable by customer A5E01163700 Kit, PFA cable extension, 15 m, adjustable by customer A5E01163701 Kit, PFA cable extension, 20 m, adjustable by customer A5E01163702 CLS300 Rod Kits, 316L stainless steel Kit, electronics with driver, standard CLS300. To be used in rod or cable versions with length less than 5 m.3)4) A5E01163723 Kit, electronics with driver, digital CLS300. To be used in rod or cable versions with length less than 5 m.3)4) A5E01163725 CLS300 Electronics Kits with drivers (for cable versions) Kit, electronics with driver, standard CLS300. To be used in cable versions with length greater than 5 m.3)4) A5E01163724 Kit, electronics with driver, digital CLS300. To be used in cable versions with length greater than 5 m.3)4) A5E01163726 CLS300 Electronics Kit, stainless steel rod 180 mm (7.09 inch) to be used with CLS300 units only (with standard active shield). Insertion length after installation is 350 mm (13.78 inch). A5E01163719 Kit, stainless steel rod 330 mm (12.99 inch) to be used with CLS300 units only (with standard active shield). Insertion length after installation is 500 mm (19.69 inch). A5E01163720 Kit, stainless steel rod 580 mm (22.83 inch) to be used with CLS300 units only (with standard active shield). Insertion length after installation is 750 mm (29.53 inch). A5E01163721 Kit, stainless steel rod 830 mm (32.68 inch) to be used with CLS300 units only (with standard active shield). Insertion length after installation is 1 000 mm (39.37 inch). A5E01163722 Kit, stainless steel rod 1 330 mm (52.36 inch) to be used with CLS300 units only (with standard active shield). Insertion length after installation is 1 500 mm (59.06 inch).2) Kit, stainless steel rod 1 830 mm (72.05 inch) to be used with CLS300 units only (with standard active shield). Insertion length after installation is 2 000 mm (78.74 inch).2) Test magnet, digital version 7ML1830-1JE Amplifier/power supply kit, standard version A5E03251683 Amplifier/power supply, digital version 7ML1830-1JF LCD display, digital version 7ML1830-1JK CLS300 Weight Kit, 316L stainless steel Kit, spare stainless steel weight. To be used in any cable version of CLS300 A5E01163727 CLS500 Gasket (IP65), Silicone Spare gasket, CLS500 enclosure version, IP65 A5E01163728 CLS500 Blind Lid Spare CLS500 aluminum blind lid A5E01163729 Kit, stainless steel rod customized length up to 1 m2) CLS500 Electronics Kit Kit, stainless steel rod customized length up to 2 m2) 1) Special flange sizes and facings are available. Please consult a local sales person for details. 2) Please consult a local sales person for part number and pricing 3) For General Purpose approvals only 4) To maintain approvals, qualified trained Siemens personnel required for part replacement Transmitter, MSP 2002-1, 330 PF 7ML1830-1JP Customers interested in a custom designed device should consult a local sales person. For more information, please visit http://www.automation.siemens.com/aspa_app. 4/80 Siemens FI 01 · 2016