Datasheet

PHOTOSENSOR MODULES
H10722 SERIES
OVERVIEW
The H10722 series is a photosensor module containing a metal
package PMT, a low-power consumption high-voltage power supply
circuit, and a low-noise amplifier. The amplifier converts the PMT
current output to a voltage output so that the signal can be easily
processed. Also, the amplifier is connected close to the PMT anode
output pin in order to make the signal less affected by external noise.
Six types of products are available with a frequency bandwidth of DC
to 20 kHz and different sensitivity characteristics such as spectral
response ranges.
PRODUCT VARIATIONS
Type No.
Spectral response
Photocathode
Window material
Current-to-voltage
conversion factor *
Frequency
bandwidth *
H10722-110
H10722-113
H10722-210
H10722-01
H10722-04
H10722-20
230 nm to 700 nm
185 nm to 700 nm
230 nm to 700 nm
230 nm to 870 nm
185 nm to 870 nm
230 nm to 920 nm
Super bialkali
Super bialkali
Ultra bialkali
Multialkali
Multialkali
Extended red multialkali
Borosilicate glass
UV glass
Borosilicate glass
Borosilicate glass
UV glass
Borosilicate glass
1 V/µA
DC to 20 kHz
* The amplifier specification can be changed upon request. Feel free to contact our sales office.
This product can't be used at vacuum environment or reduced pressure environment.
Figure 1: Typical spectral response
100
Figure 2: Frequency response
PMT GAIN: 105
TPMOB0227EB
100
PMT GAIN: 105
TPMOB0228EB
TPMOB0278EA
5
-110
1
0.1
-20
10
-04
1
-01
0.1
RELATIVE GAIN (dB)
10
ANODE RADIANT SENSITIVITY (V/nW)
ANODE RADIANT SENSITIVITY (V/nW)
-210
-113
0
-3
-5
-10
-15
0.1
1
10
FREQUENCY (kHz)
0.01
100 200 300 400 500 600 700 800 900 1000
WAVELENGTH (nm)
0.01
100 200 300 400 500 600 700 800 900 1000
WAVELENGTH (nm)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
100
PHOTOSENSOR MODULES H10722 SERIES
Figure 3: Schematic diagram
PMT
SIGNAL OUTPUT (VOLTAGE OUTPUT)
AMP
LIGHT
LOW VOLTAGE INPUT (+5 V)
LOW VOLTAGE INPUT (-5 V)
HIGH VOLTAGE
POWER SUPPLY
CIRCUIT
GND
Vref OUTPUT (+1.2 V)
Vcont INPUT (+0.5 V to +1.1 V)
(INPUT IMPEDANCE: 1 MΩ)
TPMOC0262EA
SPECIFICATIONS
Anode
Cathode
Parameter
Input voltage
Max. input voltage
Max. input current *1
Max. output signal voltage *2
Max. control voltage
Recommended control voltage adjustment range
Effective area
Peak sensitivity wavelength
Min.
Luminous sensitivity
Typ.
Blue sensitivity index (CS 5-58) Typ.
Typ.
Red / White ratio
Typ.
Radiant sensitivity *3
Min.
Luminous sensitivity *4
Typ.
Typ.
Radiant sensitivity *3 *4
Typ.
Voltage output depending
Max.
on PMT dark current *4 *5
Frequency bandwidth (-3 dB)
Current-to-voltage conversion factor
Output offset voltage
Typ.
Ripple noise *4 *6 (peak to peak)
Max.
Settling time *7
Max.
Operating ambient temperature *8
Storage temperature *8
Weight
Typ.
(at +25 °C)
-110, -113
400
80
105
13.5
—
110
8.0 × 107
2.1 × 108
220
1
10
-210
-01, -04
±4.5 to ±5.5
±5.5
+6.2 / -3.5
+4 (Load resistance 10 kΩ)
+1.1 (Input impedance 1 MΩ)
+0.5 to +1.1 (Input impedance 1 MΩ)
8
400
400
100
100
200
135
—
15.5
0.2
—
77
130
1.0 × 108
1.0 × 108
2.7 × 108
4.0 × 108
260
150
1
1
10
10
DC to 20 kHz
1
±1
0.5
10
+5 to +50
-20 to +50
100
-20
630
350
500
—
0.45
78
3.5 × 108
1.0 × 109
150
10
100
*1: At ±5 V input voltage, +1.0 V control voltage, and output current equal to dark current
*2: At ±5 V input voltage
*3: Measured at the peak sensitivity wavelength
*4: Control voltage = +1.0 V
*5: After 30 minutes storage in darkness. The actual output value in darkness is the sum of dark current and offset voltage.
*6: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF
*7: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V.
*8: No condensation
Unit
V
V
mA
V
V
V
mm
nm
µA/lm
—
—
mA/W
V/lm
V/nW
mV
—
V/µA
mV
mV
s
°C
°C
g
Figure 4: Sensitivity adjustment method
VOLTAGE PROGRAMMING
RESISTANCE PROGRAMMING
POWER SUPPLY
SIGNAL OUTPUT
LOW VOLTAGE INPUT (RED)
LOW VOLTAGE INPUT (GREEN)
GND (BLACK)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
+5 V
-5 V
GND
+0.5 V to
+1.1 V
• Adjust the control voltage to
adjust the sensitivity.
• Electrically insulate the
reference voltage output.
GND
PHOTOSENSOR MODULE
SIGNAL OUTPUT
LOW VOLTAGE INPUT (RED)
LOW VOLTAGE INPUT (GREEN)
GND (BLACK)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
POWER SUPPLY
+5 V
-5 V
GND
CW
PHOTOSENSOR MODULE
MONITOR
POTENTIOMETER (10 kΩ)
* When using a potentiometer, adjust sensitivity while monitoring
the control voltage so it does not exceed +1.1 V.
TPMOC0232EA
Figure 5: Typical gain
107
TPMOB0226EB
PMT GAIN
106
105
104
103
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
CONTROL VOLTAGE (V)
Figure 6: Ripple noise
Figure 7: Output characteristics
TPMOB0268EA
LOAD RESISTANCE: 1 MΩ
LOAD RESISTANCE: 1 MΩ
LOAD CAPACITANCE: 22 pF
CONTROL VOLTAGE: +1.0 V
OUTPUT SIGNAL
500 (mV/div.)
RIPPLE NOISE (1 mV/div.)
TPMOB0279EA
INPUT LIGHT
2 (µs/div.)
20 (µs/div.)
PHOTOSENSOR MODULES H10722 SERIES
Figure 8: Dimensional outlines (Unit: mm)
22.0 ± 0.5
14.0 ± 0.2
450 ± 20
60.0 ± 0.5
14.0 ± 0.2
1.5 ± 0.2
LOW VOLTAGE INPUT (+5 V) : AWG26 (RED)
LOW VOLTAGE INPUT (-5 V) : AWG26 (GREEN)
: AWG26 (BLACK)
GND
: AWG26 (BLUE)
Vref OUTPUT (+1.2 V)
Vcont INPUT (+0.5 V to +1.1 V) : AWG26 (WHITE)
SIGNAL OUTPUT
: RG-174/U
10
WINDOW
EFFECTIVE AREA ( 8 MIN.)
Weight: 100 g
THREADED HOLE for OPTION*
(4 × M2 DEPTH 4)
FRONT VIEW
SIDE VIEW
*OPTION: E5776, E5776-51, A9865, A10030-01
TPMOA0063EB
OPTION
OPTICAL FIBER ADAPTER E5776 / E5776-51
E5776 (FC Type)
E5776-51 (SMA Type)
22.0 ± 0.5
22.0 ± 0.5
14.0 ± 0.2
12.0 ± 0.2
14.0 ± 0.2
0.5
4 × 2.2
FRONT VIEW
SMA
4 × 2.2
FC-R
3.18
FRONT VIEW
SIDE VIEW
* Supplied with M2 screws(4pcs) for fixing to module
TACCA0055EB
0.5
GASKET
(Supplied)
14.0 ± 0.2
14.0 ± 0.2
GASKET
(Supplied)
16.2 ± 0.2
SIDE VIEW
* Supplied with M2 screws(4pcs) for fixing to module
TACCA0239EB
C-MOUNT RING A9865
GASKET
(Supplied)
C-MOUNT
14
9
30
4 × 2.1
14
4 × 3.2
5.0
7.0
0.5
* Supplied with M2 screws(4pcs)
for fixing to module
TPMOA0056EB
RELATED PRODUCT
POWER SUPPLY FOR PHOTOMULTIPLIER TUBE MODULES C10709
The C10709 is the power supply for photomultiplier tube modules which has 5 V
input voltage.
This unit can provide both the driving voltage and the control voltage. This feature
enables users to operate the modules easily.
Parameter
Output Voltage
Output Current
Max.
Control Voltage A (variable voltage range)
Input Voltage
Description / Value
±5
2.0 (+5 V), 0.2 (-5 V)
+0.25 to +1.8
AC100 to AC240
Unit
V
A
V
V
NOTE: AAdjust within the recommended control voltage range for the photomultiplier tube
module being used.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TPMO1063E01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]
DEC. 2015. IP
Similar pages