CPS Datasheet

End-of-Life Vishay Dale Product
CPS
Vishay Dale
Wirewound Resistors,
Commercial Power, Radial Terminals
FEATURES
• Direct mounting on printed circuit board
Pb-free
• Circuit board lock-in mounting tabs
Available
e3
• High performance for low cost
RoHS*
RATED POWER IN %
COMPLIANT
Please reference the Vishay Dale CPR as an alternative
option (for CPR datasheet please visit our website:
http://www.vishay.com/doc?30219.
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RANGE
Ω
POWER
RATING
P70 °C
W
GLOBAL
MODEL
120
100
80
60
40
± 5 %, ± 10 %
TCR
± 600 ppm/°C
TCR
± 300 ppm/°C
CPS04
4
R10 - R99
1R0 - 1K0
CPS05
5
R10 - R99
1R0 - 2K0
CPS07
6.5
R10 - R99
1R0 - 2K7
20
0
- 65
50
150
70
250
350
AMBIENT TEMPERATURE IN °C
Derating
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CPS CHARACTERISTICS
°C
- 65 to + 350
Short Time Overload
-
5 x rated power for 5 s
Terminal Strength
lb
10 minimum
Maximum Working Voltage
V
(P x R)1/2
Operating Temperature Range
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
± 3.0 % ΔR average
Load Life
1000 h at rated power, 1.5 h “ON”, 0.5 h “OFF”
Climatic Sequence
1000 cycles, - 55 °C to + 125 °C
± 2.0 % ΔR
Damp Heat, Steady State
+ 40 °C, 93 % RH, 56 days
± 2.0 % ΔR
± 0.2 % ΔR typical
Resistance to Solder Heat
+ 260 °C, 10 s
Low Temperature Operation
- 65 °C, full rated working voltage for 45 min
± 3.0 % ΔR
GLOBAL PART NUMBER INFORMATION
Global Part Numbering Example: CPS05P100R0KE14
C
P
S
0
5
P
1
0
0
R
0
K
E
1
4
GLOBAL
MODEL
TERMINAL
VALUE
TOLERANCE
PACKAGING
SPECIAL
CPS04
CPS05
CPS07
P = /2
R = Decimal
K = Thousand
R1500 = 0.15 Ω
1K000 = 1000 Ω
J = ± 5.0 %
K = ± 10.0 %
E14 = Lead (Pb)-free bulk
E31 = Lead (Pb)-free four layer bulk
(Dash Number)
(up to 3 digits)
From 1 - 999 as
applicable
B14 = Tin/lead bulk
B31 = Tin/lead four layer bulk
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
52
For technical questions, contact: [email protected]
Document Number: 21009
Revision: 12-Nov-08
End-of-Life Vishay Dale Product
CPS
Wirewound Resistors,
Commercial Power, Radial Terminals
Vishay Dale
DIMENSIONS in inches [millimeters]
0.29 + 0.039
[7.37 + 1]
L
0.54 [14.6]
0.053 [1.35]
0.18 [4.57]
0.020 [0.51]
0.055 ± 0.005
[1.4 ± 0.12]
RM
DIMENSIONS in inches [millimeters]
MODEL
L
RM
CPS04
0.945 ± 0.055
[24 ± 1.4]
0.598
[15.2]
CPS05
1.350 ± 0.055
[34.3 ± 1.4]
1.000
[25.4]
CPS07
1.752 ± 0.055
[44.5 ± 1.4]
1.398
[35.5]
SURFACE TEMPERATURE
Body hot spot
TEMPERATURE RISE IN °C
TEMPERATURE RISE IN °C
Terminal
100
CPS05/2
300
CPS07/2
CPS04/2
200
50
100
CPS05/2
CPS04/2
CPS07/2
0
0
2
4
6
CPS Terminal Temperature
Document Number: 21009
Revision: 12-Nov-08
8
POWER IN W
0
0
2
4
6
8
POWER IN W
CPS Body Hot Spot Temperature Rise
For technical questions, contact: [email protected]
www.vishay.com
53
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages