cryptoRF® tags CryptoRF® World’s Largest Family of Secure RF Memories CryptoRF® supports the most stringent security standards used for product authentication, contactless payment, patient safety, anti-cloning of consumables, loyalty and patron management. The CryptoRF transponder and CryptoRF reader pair offer a full RFID secure authentication solution for embedded and non-embedded applications. CryptoRF is a 13.56 MHz RFID device family with a 64 bit embedded hardware encryption engine and dual authentication capability. Based on the royalty free ISO 14443 Type B standard, CryptoRF is ideally suited to meet a variety of security applications such as product authentication, contactless payment, patient safety, anti-cloning of consumables, loyalty and patron management. CryptoRF devices are great for proximity applications where hardware security is desired or when environmental factors such as dirt, moisture, and chemicals exist. CryptoRF devices are available with EEPROM densities from 4 Kbit to 64 Kbit of user memory to accommodate a wide range of information storage and cost requirements. The user memory is divided into 4, 8 or 16 separate sections, each of which can be customized to allow different levels of read and write access, including: n n n n Open access Password protection Authentication Data encryption and message authentication codes (MAC) These user selectable optional security features give customers tremendous flexibility in developing and deploying a secure RF solution. CryptoRF is deliverable as complete RFID tags, modules, and thinned wafers for creation of complete RFID tags and cards. Highlights: Stream encryption ensuring data privacy, multiple key sets for authentication and encryption, encrypted passwords with attempt counters, selectable access rights by zone, tamper sensors, compliant with industry standards. Advantages of Using Epoxy Glass: High reliability, long life (10 years or more in most applications), corrosion and moisture resistant. Advantages of Using PET (Polyethylene Terephthalate): Great option for labels with flexible attachment options and graphic integration possibilities. Available in printable surface and adhesive back options. MY1 Epoxy Glass MX1 Epoxy Glass L02FG PET 17mm thin profile round tag transponders 13mm thin profile square tag transponders 20mm thin profile square tag transponders MECHANICAL MECHANICAL MECHANICAL Parameter Substrate Substrate Thickness Track Center Hole Diameter Max Operating Distance* Typical Punched Outer Dimension Maximum Thickness Typical Value Units Epoxy Glass - 110 µm Cu with Ni+Au plating - Parameter Substrate Substrate Thickness Track 3 mm Center Hole Diameter 7 to 15 mm Max Operating Distance* 17.0 diameter mm Typical Punched Outer Dimension 0.6 mm Maximum Thickness *Communication range is dependent on the reader antenna design. **Varies by substrate vendor ELECTRICAL ELECTRICAL Parameter Resonance Frequency, f0 Write Endurance Data Retention Typical Value Units 14.0 MHz 100,000 Cycles 10 Years Range Units TEMPERATURE Parameter Parameter Resonance Frequency, f0 Write Endurance Data Retention Typical Value Units Epoxy Glass - 110 µm Cu with Ni+Au plating - Substrate Substrate Thickness Track - mm Center Hole Diameter 5 to 13 mm Max Operating Distance 13.0 x 13.0 mm Typical Outer Dimension 0.9 mm Typical Value Units 14.5 MHz Typical Value Units PET - 36 to 75** µm Al etched - N/A 10 to 20 mm 25.0 x 25.0 mm Typical Value Units 14.3 MHz ELECTRICAL 100,000 Cycles 10 Years Range Units TEMPERATURE Parameter Parameter Parameter Resonance Frequency, f0 Write Endurance Data Retention 100,000 Cycles 10 Years Range Units TEMPERATURE Parameter Storage -40° to +85° Celsius Storage -40° to +85° Celsius Storage -40° to +85° Celsius Operating -25° to +70° Celsius Operating -25° to +70° Celsius Operating -20° to +70° Celsius Delivery Option Delivery Option Delivery Option 35mm Tape 35mm Tape PET reel, PET sheet, PSA layer for ‘peel and stick’, Printed Graphic (Logo) PRODUCTS Standard Tag Options Epoxy Glass PET Device MY1 MX1 MVB1G L02FG AT88RF04C 3 3 3 3 Configuration Memory User Memory Zones RF Protocol 2 Kbit 4 Kbit 4 ISO/IEC 14443 Type B AT88SC0808CRF 3 3 3 2 Kbit 8 Kbit 8 ISO/IEC 14443 Type B AT88SC1616CRF 3 3 3 2 Kbit 16 Kbit 16 ISO/IEC 14443 Type B AT88SC3216CRF 3 3 3 2 Kbit 32 Kbit 16 ISO/IEC 14443 Type B AT88SC6416CRF 3 3 3 2 Kbit 64 Kbit 16 ISO/IEC 14443 Type B AT88RF1354 - Reader IC N/A N/A N/A N/A N/A N/A ISO/IEC 14443 Type B N/A Target Applications: Anti-counterfeiting, clone prevention and authentication, IP and brand protection, energy metering and payments, medical, safety, and security. CryptoRF is available in many different shapes and sizes. Specially designed CryptoRF tags in a variety of shapes can be developed for high volume applications. PET Antenna Construction Etched antenna coils Flip chip with bumps Adhesive Etched antenna coils PET basefilm MY1 Epoxy Glass MX1 Epoxy Glass Delivery Format for MY1 Module Delivery Format for MX1 Module L02FG PET Miscellaneous Tag Formats For free samples of the 4K device contact Atmel sales at www.atmel.com/contacts © 2009 Atmel Corporation. All rights reserved. Atmel®, logo and combinations thereof, CryptoRF®, and others are the registered trademarks or trademarks of Atmel Corporation. Other terms and product names may be the trademarks of others. Atmel Corporation, Colorado Springs, 1150 E. Cheyenne Mtn. Blvd., Colorado Springs CO 80906 USA • Tel: (719) 576-3300 • Fax: (719) 540-1759 8704A-11/09-500 Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.