View detail for Product Selection Guide

Product Selection Guide
Volume 11
Table of Contents
Atmel Microcontroller Portfolio...... 4
AVR 8-bit Microcontroller
Offering............................................................... 6
Atmel | SMART 32-bit ARM
Microcontroller Offering....................10
Atmel Tools and Software..............14
Capacitive Touch
Interface Devices ...................................16
Atmel Automotive Solutions.........17
Atmel Wireless Platform...................18
Atmel Smart Metering.......................24
Atmel Security Solutions..................25
Atmel Memory Solutions.................26
2
Inspiring
Smart and
Secure
Connected
Designs
© 2015 / www.atmel.com
Atmel at the Heart of the Connected World
Many electronics industry analysts predict The Internet of Things (IoT) will experience
phenomenal growth in the next few years, with connected devices numbering in the tens
of billions. Since its inception 30 years ago, Atmel® has provided innovations in the essential
building blocks of IoT designs—from embedded processing and connectivity to sensors,
security, and software. Atmel ties it all together with a rich ecosystem of design tools, including
the free Atmel Studio IDE, making it simple to leverage these industry-leading technologies.
802.15.4
ZigBee
6LoWPAN
LWMesh
250kb/s
Up to 300m range
Bluetooth
Atmel SmartConnect
and Wireless
Narrowband
Low Energy
& Dual Mode
3Mb/s
Up to 30m range
Wi-Fi
32-bit MPU
FSK
2.4GHz
& Sub GHz
802.11a/b/g/n
Highly Secure
Low Cost
ARM9 &A5 Cores
~2-5Kb/s
Up to 2Km range
72Mb/s
Up to 200m range
Microcontrollers
Crypto
Authentication
SHA
AES
ECC
8-bit Flash MCU
Industry Leading
8-bit AVR Micros
Memory
Serial EEPROM
MAC Address
Product Selection Guide
32-bit Flash MCU
Lowest Power
ARM M0+, M4 & M7 Cores
Event System, Sercom, & PTC
Atmel Companion
Devices
Automotive
CAN / LIN Tx
High Voltage
Analog
AFE
Metrology
Temp Sensor
3
Atmel Microcontroller Portfolio
32-bit Embedded MPU
Highly Secure
Cost Efficient
ARM9 & Cortex-A5
SAMA5
Cortex-A5 FPU,
850 DMIPS
FPU Low Power
32-bit Flash MCU
Lowest Power
AVR & ARM Cortex-M
Cores Event System,
SERCOM, PTC
SAM9
ARM926, 440 DMIPS
Microprocessor
SAM S70/E70
Performance
Cortex-M7
Highest Performing MCU
8-bit Flash MCU
Industry Leading 8-bit
AVR Microcontrollers
SAM4 & SAMG
Cortex-M4 FPU,
180 DMIPs
512KB to 2MB Flash
SAM D, SAM L,
SAM C
SAM W, SAM R,
SAM B Wireless
Cortex-M0+, 45 DMIPS
16 KB to 256KB Flash
Wi-Fi, ZigBee, BLE
XMEGA
8-bit AVR, 32 MIPS
16KB to 384KB Flash
Legacy 32/bit
SAM7, SAM3, UC3
megaAVR
8-bit AVR, 20 MIPS
4KB to 256KB Flash
tinyAVR
8-bit AVR, 20 MIPS
0.5KB to 16KB Flash
8051
8-bit
Features
4
© 2015 / www.atmel.com
AVR and ARM Cortex-M0+ Families
The world’s widest and most successful 8-bit and 32-bit line card
Automotive
High Performance in a Small
Package: tinyAVR
AVR
World’s Most Popular 8-bit
MCU: megaAVR


Lighting
Industrial &
Appliance
Consumer
Low Power


















Highest Performance 8-bit:
AVR XMEGA
32-bit AVR: UC3
General Purpose: SAM D
Cortex-M0+
IoT &
Sensor Hub


Industry’s Lowest Power
Cortex-M: SAM L
5V for Industrial & Appliance:
SAM C




Connected Smart Lighting:
SAM R
Best Cap Touch
Industry’s Lowest
Power
Best Automotive
Touch
Industry Only
MCU Solution


#1 Open
Source MCU

High Performance ARM Cortex Families
High performance, low power, small footprint MPU and MCU
IoT &
Sensor Hub
Point of
Sales
Automotive
Cortex-M4
Wearable and Sensor Hub
SAM G
Low Power
Up to
2MB Flash






General Purpose SAM9
Lowest Power MPU SAMA5
Product Selection Guide


Highest
Performance
Cortex-M



Low Power &
Small Packages

Automotive M7 with E-AVB
SAM V7
MPU
Complete
Metering
Solutions

Ethernet Connectivity
SAM4E
Cortex-M7


Metering SAM4C
Highest Performance MCU
SAM S7/E7
Metering

General Purpose SAM4S
Ultra Low Power SAM4L
Industrial &
Appliance



5
AVR® 8-bit Microcontroller Offering
World’s Most Efficient 8-bit CPU
• Single cycle instructions
• 32 working registers
• Designed for high-level languages
Improves efficiency
Reduces code size by 30–60%
Lowest Power Consumption
• picoPower™ technology
Increase battery life
Reduced power supply requirements
Ease of Use
• Atmel development tools
• AVR® Freaks
• Arduino and Maker movement
Faster product development
Scalable Product Family
• ~2000 products available
• Memory, pin and feature options
6
Reuse of SW and HW
© 2015 / www.atmel.com
AVR 8-bit Product Families
tinyAVR—Small and Powerful
Part Number
Pins
Flash
(KB)
SRAM
(B)
EEPROM (B)
I/O
TINY 4
4/6
0.5
32
N/A
4
TINY 5
4/6
0.5
32
N/A
4
ADC
Packages
Comments
SOT23-6, UDFN-8
Low Cost
4 x 8bit
SOT23-6, UDFN-8
Low Cost
with ADC
TINY 9
4/6
1
32
N/A
4
SOT23-6, UDFN-8
Low Cost
TINY 10
4/6
1
32
N/A
4
4 x 8bit
SOT23-6, UDFN-8
Low Cost
with ADC
TINY 13A
8/10/12
1
64
64
6
4 x 10bit
PDIP-8, SOIC-8, QFN-10, QFN-20
Picopower
TINY 20
14/15/20
2
128
N/A
10/12
8 x 10bit
SOIC-14, TSSOP-14, WCCSP-12,
UFBGA-15, VQFN-20
Qtouch
TINY 24A
14/15/20
2
128
128
12
12 x 10bit
SOIC-14, PDIP-14, UFBGA-15,
QFN-20, MLF-20, VQFN-20
Diff ADC
Gain Stage
TINY 25
8/20
2
128
128
6
4 x 10bit
PDIP-8, SOIC-8, QFN-20, QFN-20
High Speed
Diff ADC
Gain Stage
TINY 40
20
4
256
N/A
18
8 x 10bit
SOIC-14, TSOP-20, VQFN-20
QTouch
TINY 44A
14
4
256
256
12
8 x 10bit
SOIC-14, PDIP-14, UFBGA-15,
QFN-20, MLF-20, VQFN-20
Qtouch
Diff ADC
Gain Stage
TINY 45
8/20
4
256
256
6
4 x 10bit
PDIP-8, SOIC-8, TSOP-8, QFN-20
High Speed
Diff ADC
Gain Stage
TINY 48
28/32
8
256
64
24/28
10bit
PDIP-28, QFN-28, QFP-32, QFN-32
Qtouch
14
8
512
512
12
8 x 10bit
SOIC-14, PDIP-14, UFBGA-15,
QFN-20, MLF-20, VQFN-20
Qtouch
Diff ADC
Gain Stage
TINY 85
8/20
8
512
512
6
4 x 10bit
PDIP-8, SOIC-8, QFN-20
High Speed
Diff ADC
Gain Stage
TINY 88
28/32
8
512
64
24/28
10 bit
PDIP-28, QFN-28, QFP-32, QFN-32
Qtouch
TINY 84A
TINY 102
8
1
32
N/A
6
5 x 10bit
UDFN-8, SOIC-8
USART/SPI
TINY 104
14
1
32
N/A
12
8 x 10bit
SOIC-14
USART/SPI
TINY 261A
20/32
2
128
128
16
11 x 10bit
SOIC-20, PDIP-20, TSOP-20,
QFN-32
High Speed
PWM Diff ADC
Gain Stage
TINY 441
14/20
4
256
128
12
12 x 10bit
SOIC-14, MLF-20, QFN-20
Acc VREF 2%
osc Diff ADC
Gain Stage
TINY 461A
20/32
4
256
256
16
11 x 10bit
SOIC-20, PDIP-20, TSOP-20,
QFN-32
High Speed
PWM Diff ADC
Gain Stage
14
8
512
256
12
12 x 10bit
SOIC-14, MLF-20, QFN-20
Acc VREF 2%
osc Diff ADC
Gain Stage
TINY 861A
20/32
8
512
512
16
11 x 10bit
SOIC-20, PDIP-20, TSOP-20,
QFN-32
High Speed
PWM Diff ADC
Gain Stage
TINY 1634
20
16
256
1
18
12 x 10bit
SOIC-20, QFN-20
2 x USART
TINY 841
Product Selection Guide
7
AVR 8-bit Product Families (Continued)
megaAVR—Robust and Flexible
Part Number
Flash
(KB)
SRAM
(KB)
EEPROM
(KB)
I/O
ADC
Packages
Comments
MEGA16A
40/44
16
1
0.5
32
8 x 10bit
PDIP-40, MLF-44, QFP-44
Low Cost QTouch
MEGA32A
40/44
32
2
1
32
8 x 10bit
PDIP-40, MLF-44, QFP-44
Low Cost QTouch
MEGA48PB
32
4
0.5
0.25
27
8 x 10bit
MLF-32, QFP-32
MEGA64A
64
64
2
N/A
53
8 x 10bit
MLF-64, QFP-64
MEGA88PB
32
8
1
0.5
23
8 x 10bit
MLF-32, QFP-32
40/44
16
1
0.5
35
N/A
PDIP-40, MLF-44, QFP-44
MEGA164PA
40/44/49
16
1
0.5
32
8 x 10bit
PDIP-40, MLF-44, QFP-44
MEGA168PB
32
16
1
0.5
27
8 x 10bit
MLF-32, QFP-32
MEGA162
MEGA169PA
64
16
1
0.5
54
8 x 10bit
MLF-64, QFP-64, QFN-64
MEGA324PB
44
32
2
1
39
8 x 10bit
MLF-44, QFP-44
MEGA328PB
32
32
2
1
27
8 x 10bit
MLF-32, QFP-32
MEGA329PA
64
32
2
1
54
8 x 10bit
MLF-64, QFP-64
100
64
8
4
86
16 x 10bit
BGA-100, QFP-100
40/44
64
4
2
32
8 x 10bit
PDIP-40, MLF-44, QFP-44
MEGA 640
MEGA 644PA
8
Pins
MEGA 649P
64
64
4
2
54
8 x 10bit
MLF-64, QFP-64
MEGA 1280
100
128
8
4
86
16 x 10bit
BGA-100, QFP-100
MEGA 1281
64
128
8
4
54
16 x 10bit
MLF-64, QFP-64
MEGA 1284
40/44
128
16
4
32
8 x 10bit
PDIP-40, MLF-44, QFP-44
MEGA 2560
100
256
8
4
86
16 x 10bit
BGA-100, QFP-100
MEGA 2561
64
256
8
4
54
8 x 10bit
MLF-64, QFP-64
MEGA3290P
100
32
2
1
69
8 x 10bit
QFP-100
LCD PicoPower
MEGA6490P
100
64
4
2
69
8 x 10bit
QFP-100
LCD PicoPower
External SRAM
MEGA 8515
40/44
8
0.5
0.5
35
N/A
PDIP-40, MLF-44, QFP-44
MEGA 8535
40/44
8
0.5
0.5
32
8 x 10bit
PDIP-40, MLF-44, QFP-44
© 2015 / www.atmel.com
XMEGA—More Performance
Part Number
Pins
Flash (KB)
SRAM (KB)
EEPROM
(KB)
I/O
ADC
Packages
Comments
A1U
100
64/128
4/8
2
78
2 - 16 x 12bit
2msps
TQFP-100, BGA-100
VFBGA-100
Event System USB2.0
A3U
64
64/128
192/256
4/8/16
2/4
50
2 - 16 x 12bit
2msps
TQFP-64, QFN-64
Event System USB2.0
Qtouch
A4U
44
16/32
64/128
2/4/8
1/2
34
12 x 12bit
2msps
QFP-44, QFN-44
VFBGA-49
Event System USB2.0
Qtouch
B1
100
64/128
4/8
2
53
2 - 8 x 12bit
TQFP-100,
VFBGA-100
PicoPower 4x40 Segment
LCD USB 2.0
B3
64
64/128
4/8
2
36
1 - 8 x 12bit
TQFP-64, QFN-64
DRQFN-64
PicoPower 4x25 Segment
LCD USB 2.0
C3
64
32/64
128/192
256/384
2/4/8/16
4/8/16
50
1 - 16 x 12bit
TQFP-64, VQFN-64
PicoPower Event System
Full Speed USB
C4
44
16/32
2/4
1
34
1 - 16 x 12bit
TQFP-44, QFN-44
VFBGA-49
PicoPower Event System
Full Speed USB
D3
64
32/64
128/192
256/384
4/8
16/32
1/2/4
50
1 - 16 x 12bit
TQFP-64, QFN-64
PicoPower Event System
QTouch
D4
44
16/32
64/128
1/2/4/8
1/2/4
34
1 - 12 x 12bit
TQFP-44, VFBGA-49
PicoPower Event System
Qtouch
E5
32
8/16/32
1/2/4
0.5/1
26
1 - 16 x 12bit
QFP-44, QFN-44
UQFN-44
PicoPower Event System
Custom Config Logic
Performance
XMEGA
megaAVR
tinyAVR
AVR CPU
Complexity
Product Selection Guide
9
Atmel | SMART 32-bit ARM
Microcontroller Offering
Broad ARM Cortex M0+ Offerings
SAM D, SAM L and SAM C Series
SAM D Family
Features
Cortex M0+
SAM D10
SAM D11
8-16KB Flash
SAM D20
SAM D21
16-256KB
Flash
SAM L21/22
SAM C20/21
32-256KB Flash
Event System
SERCOM
PTC
10-bit 350 ksps DAC
2xAnalog Comparator
14, 20 and 24 pins
6-ch DMA
32, 48 and 64 pins
12-ch DMA
1x T/C for Control
16-ch DMA
12-ch DMA
3x T/C for Control
32-bit RTC with Calendar
Serial Wire Debug
BOR and POR
Internal RCs
12-bit 350Ksps ADC
12-bit, 20ch, 1Msps ADC*
FS USB
Device
Watchdog
High GPIO Count
FS USB H&D
I2S
SLCD*
HW Div
5V Operation
Comments
• SAML22 has
integrated SLCD
• SAMC21 has 16 bit
Sigma Delta
• SAMC20 has 12
channel 1MSPS ADC
Series Descriptions
•SAM D09 – The smallest member of the SAM D
family in terms of memory, pin count, and features.
Compatible with the SAM D10, SAM D11, SAMD20,
and SAM D21.
•SAM D10/11 – Feature upgrade from the SAM
D09 with additional serial interfaces, timers, Analog
Comparator, DAC, and Peripheral Touch Controller.
•SAM D20/21 – Offers a rich set of peripherals,
flexibility, and ease-of-use with low power
consumption Full Speed USB, DMA, high-end
timers/counters
10
•SAM DA1 – Automotive qualified microcontrollers,
embedding Peripheral Touch Controller (PTC) enabling
efficient Button/Slider/Wheel and Proximity detection
solutions for automotive HMI applications
•SAM L21/22 - Ultra Low Power version featuring
35uA/MHz in active mode, 1Msps ADC and DAC,
Custom Configurable Logic, PTC and more
•SAM C20/21 – 5V version for Industrial applications
that need to interface with higher powered devices.
Features CAN, RS485, 16-bit Sigma Delta ADC
and QTouch
© 2015 / www.atmel.com
Atmel ARM Cortex-M4 Summary
SAM4 & SAM G
SAM 4/G Family
Features
Cortex M4/M4F
Up to 2MB Dual Bank
Flash
High I/O Pin
DMA
Communication (USB,
CAN, Ethernet)
SAM4N
SAM4S
SAM4E
SAM4L
SAM G
100 MHz
120 MHz
120 MHz
48 MHz
120 MHz
512KB-1MB
Single Bank
-
128KB-2MB
Single/Dual Bank
Cache
512KB-1MB
Single Bank
Cache
128-512KB
Single Bank
-
256-512KB
Single Bank
Cache
100, 144 pins
48, 64 and 100
pins
49 and 64 pins
DMA
DMA
DMA
FS USB Device
2x CAN
1x Ethernet
FS USB H&D
-
48, 64 and 100 pins
CMOS Interface
Safety and Security
I2S
FS USB Device
-
CMOS Interface
CRC
I 2S
CRC
AES 256
-
CRC
AES 256
RNG
CRC
-
I 2S
I2S
Series Descriptions
•SAM4N – Ideal for a wide range of applications in
industrial automation, consumer and appliance, and
energy metering markets. Pin compatible with SAM3S,
SAM3N and SAM7S,
•SAM4S – Features a multi-layer bus matrix, multichannel direct memory access (DMA) and distributed
memory to support high data rate communication.
•SAM4E – Offers a rich set of connectivity peripherals
including 10/100Mbps Ethernet MAC supporting
IEEE1588 and dual CAN as well as single-precision FPU.
Product Selection Guide
•SAM4L – Ideal for power sensitive designs delivering
down to 90uA/MHz in active mode as well as sleep
mode with full RAM retention of 1.5uA and wake-up
time of 1.5us.
•SAM G – Optimized for ultra-low power and high
performance. Small form factor bundled with FPU,
DMA and good SRAM to flash ratio in a very tiny
3x3mm package
11
Atmel | SMART ARM Cortex-M7 MCU Family
Perfectly matching the increasing application requirements
SAM
S70
SAM
E70
SAM
V71
300MHz
Frequency
Flash
512KB/1MB/2MB
SRAM
256KB/384KB/384KB
1KB
Backup SRAM
Ethernet 1588 (MAC)
CAN-FD
-
10/100
Mbps
-
10/100
Mbps
-
2
2
2
Media LB
-
Yes
Automotive qualified
-
Yes
Camera interface
1
QSPI
1
HSMCI/SDIO/eMMC
1
USB
USART or SPI/UART
1x HS (Host/Device)
5/3
SPI/I2C/SSC
2/3/1
12-bit ADC
2x 12-ch 2Mbps
12-bit DAC
2-ch 2 Mbps
Timers/PWM
Crypto
High Performance
•ARM Cortex-M7 – 300MHz, 1500 CoreMark
•16kB+16kB of I&D cache with ECC
•Execution in place from on-chip flash,
NVM connected to QSPI and EBI
•Multi-port SRAM minimizing latency
•User configurable SRAM and TCM size
Features
16-bit (SDRAM, SRAM)
Ext Bus Interface
12
SAM
V70
•HS USB host/device with integrated PHY
•Memory integrity check monitor
•CMOS camera interface
•Ethernet and dual CAN on SAM E70
•Sleepwalking on UART and I2C
•Event system
Advanced Analog Front-end (AFE)
•Dual S&H, 12-bit ADC, 16-bit HW averaging
•Differential input, programmable gain
•Automatic gain and offset error correction
•DMA support, HW & SW trigger
Extended Industrial Temperature
•-40 to 105°C
12/8
TRNG, AES256, SHA1/256
Pin count
64–100–144
Package
QFP, BGA
© 2015 / www.atmel.com
Atmel eMPU Product Portfolio
Offers rich, peripheral set, low power and ease of use
SAMA5D2
SAMA5D3
SAMA5D4
500/166
536/166
600/200
✓
--
✓
128
--
128
DDR3 & Quad SPI
✓
--
--
USB HSIC
✓
--
--
1x 10/100
1x Gbit 1x 10/100
2x 10/100
CAN
✓
✓
--
LCD Interface
✓
✓
✓
Video
--
--
Yes (720p)
Thrust Zone
✓
--
✓
On-the-fly memory encryption/Tamper detection
✓
--
✓
Temperature range up to 105°
✓
✓
--
Max CPU/DDR speed (MHz)
Neon
L2 cache (KB)
EMAC
SAMA5D2 series:
SAMA5D4 series:
The Atmel | SMART SAMA5D2 series extends the
SAMA5 family by offering great features integrated into
lower pin count packages, making it ideal for applications
where security, power consumption or space constraints
are key considerations.
The Atmel | SMART SAMA5D4 MPU operates at
945DMIPS, includes a 720p hardware video decoder
and high level of security making it ideal for any highperformance, secure and cost-sensitive industrial
application requiring video playback. Updated A5D4
speed from 528Mhz to 600Mhz.
SAMA5D3 series:
Operating at 850DMIPS at under 150mW, the
Atmel | SMART SAMA5D3 MPU is ideal for any
high-performance, low-power and cost-sensitive
industrial application.
Product Selection Guide
13
Atmel Tools and Software
SYSTEM ON MODULE
PR
E-
PR
PE
COMMERCIAL
SOFTWARE
DU
TO
TY
O
PR
O
CT
IO
N
N
AL
CT
IO
EV
GRAPHICS /UI
SOLUTION
CONNECTIVITY
SOLUTION
O
AT
DU
U
S
AS
DEBUGGER / IDE /
COMPILLER
POWER MANAGEMENT
SOLUTION
M
N
PR
IO
Atmel Studio 7
Available for free at atmel.com
Powerful
•Based on Visual Studio 2015 frontend
•Supports 8/32-bit AVR and ARM development and
debugging for Atmel MCU targets
•Supports project migration from earlier Studio versions
Easy to Use
•Extensive embedded software library
•Integrated training modules and examples
14
700,000+
93%
Studio downloads
since 2012
Users ratings
excellent,
very good, good
Extensible
•Rich 3rd-party ecosystem of plugins
•Configuration tools for Atmel Touch and Wireless
technologies
•Supports data and power visualization
© 2015 / www.atmel.com
Atmel START
Atmel Power Debugger
Web-based Software
Configuration & Deployment Engine
•Automatic software integration engine, lets developers
focus on their application instead of integrating offthe-shelf software.
•Intuitive graphical Software configuration
•Deploy software to Atmel board, or users own
custom board
•Supports ”top down” evaluation of Atmel technology
Combined Debugger and Power Measurement Probe
•Simultaneous debugging and power measuring
•Two independent channels for power measurement
•CDC virtual COM port
•DGI for streaming application & power data
•Provides target power, 1.6 – 5.5V,
up to 100mA
•Status LEDs for debugging
and target supply
Atmel Data Visualizer
View MCU Data at Runtime
•MCU Data streamed from power debugger to Data
Visualizer
•Viewed in configurable UI Objects
•Oscilloscope view, text terminal, buttons, checkboxes,
gauges, textbox…
•Can run as Studio 7 plug-in, or stand alone
Power Analysis (Xplained Pro kits w/ XPM
and Power Debugger Probe)
•Power and Battery estimation between currsors over
duty cycle
•Correlation between current consumption and
code location
Product Selection Guide
15
Capacitive Touch Interface Devices
Touching the Connected Car
Opportunities for capacitive touch technologies
Anti pinch sensor
Proximity
Overhead panel
Proximity, buttons, slider
Mirror
Buttons and
proximity
Electronic pedal
Proximity and buttons
Centerstack
Touchscreen,
proximity, buttons,
sliders, wheels
Door panel
Proximity,
buttons, sliders,
wheels
Middle console
Touchpad, BSW
Peripheral Touch Controller — PTC
HW Module for Capacitive Touch Sensing
•Buttons, Sliders, and Wheels
•Mutual- and self-capacitive touch
• Can run both at the same time
• Self-(re)calibrating, no tuning needed
• No external components needed
•Excellent conducted immunity (CI)
• Built-in hardware filtering
• Passes 10V CI*
•Low standby power consumption
• 4µ stand with wake-up touch
•Low CPU utilization
• Autonomous operation
• Non blocking interrupt behavior
•High channel count
• Up to 256 mutual cap channels
• Up to 32 self cap channels
* 100K series resistor might be needed in some designs
16
© 2015 / www.atmel.com
Atmel Automotive Solutions
You can rely on Atmel with over 30 years of design
experience and expertise in the automotive field. You
can also depend on us to support you with extensive
demonstration and evaluation kits, reference boards,
software, detailed documentation, and our expert staff
of application engineers.
Automotive Microcontrollers
Our wide range of cost-effective, top-quality products
with fully functional design kits support your designs,
whether they are large, complex electronic systems
for automotive safety or body control, or smaller,
independent applications.
Automotive Serial EEPROMs
We offer a complete line of automotive temperature
grade Serial EEPROMs supporting I2C, SPI and Microwire
protocols. These products are ideal for high-speed
designs in robust and noisy environments.
Automotive Touch
Car Access
The maXTouch® family — known for its superior
performance and rich feature set — is now qualified
for automotive applications such as automotive
touchscreens and touchpads used in center stack
displays, navigation systems, radio human-machine
interfaces (HMIs) and rear-seat entertainment systems.
Our devices support access applications including remote
keyless entry (RKE) and passive entry/go (PEG)
systems, so you can deliver the convenience as well as
security that drivers expect.
Broadcast Radio
With our devices, you can meet the stringent
requirements of “under the hood” systems. We
understand that high temperatures, strong mechanical
vibration and fluctuating electromagnetic fields require
products based on decades of good architecture,
meticulous manufacturing and robust testing.
Backed by more than 30 years’ experience in designing
broadcast radio solutions, as well as support for industry
standards (ISO9001 and ISO16949), our solutions are
ideal for the quality and performance requirements of
the car radio market.
CAN/VAN Networking
Controller Area Network (CAN) networking is widely
used in electronic architectures for today’s modern
vehicles. Atmel offers a wide range of solutions for CAN
networking, including AVR 8-bit RISC microcontrollers
and transceivers ready to go with data-rates up to
5Mbit/s supporting the new CAN Flexible Data-rate
standard (CAN FD).
Product Selection Guide
Drivers/High-Temperature ICs
Battery Management
Lithium-Ion (Li-Ion) batteries tend to overheat when
overcharged or during deep discharge, so our devices are
equipped to provide protection and safety features that
are critical in high cell count Li-Ion battery applications.
LIN Networking
Our devices support the low-cost local interconnect
networking (LIN) systems that are used throughout
automobiles for comfort, powertrain, sensor and
actuator applications.
17
Atmel Wireless SmartConnect IoT Platform
Enabling Connectivity Solutions
GW to Router, Cloud
Auth/Security
Cloud Partners
Internet
TM
BLE Node to GW
Authentication/Security
802.15.4
TM
15.4
TM
6LowPan
15.4
TM
Pre-Packaged
Solutions
72o
Sub GHz
Wi-Fi 802.11
BT/BLE
Solution Pending
ZigBee 802.15.4
ATA 8515
Transceiver
w/ AVR MCU
ATA 8510
Transceiver
MCU + Flash
ATA 8215
Receiver
w/ AVR MCU
SAM W25
802.11bgn
Standalone Module
WINC1500
802.11bgn
Network Controller
Module
86RF215
Sub-G & 2.4G
Dual Band Radio
*
ATA 8210
Receiver
MCU + Flash
ATA 840x
Transmitter
ATA 874x
Transmitter
MCU + Flash
WINC3400
802.11bgn/BLE4.0
Combo Network
Controller Module
WILC1000
802.11bgn
LINK Controller
Module
SAMB11
BLE4.1
Standalone Module
BTLC1000
BLE4.1 Link
Controller Module
MEGA RFR
2.4G
Standalone
SiP/Module
SAM R21
2.4G
Standalone
SiP/Module
86RF212B
Sub-G ZigBit
Module
86RF23x
2.4G ZigBit Module
86RF212B
Sub-G Radio
86RF23x
2.4G Radio
* Customer Sampling
18
© 2015 / www.atmel.com
WILC1000 Network Controllers Series
Key Features:
Ordering Codes
Description
ATWILC1000B-MU-T/Y
Single 802.11 b/g/n chip, 5X5
QFN (Tape & Reel / Tray)
ATWILC1000B-UU-T/Y
Single 802.11 b/g/n chip, 3x3
CSP PKG (Tape & Reel / Tray)
ATWILC1000-MR110PB
Certified WILC1000B Module
W/ PCB Antenna
ATWILC1000-MR110UB
•IEEE 802.11 b/g/n (1x1) for up to 72 Mbps
•Integrated PA and T/R switch
•Superior sensitivity and range via advanced
PHY signal processing
•Wi-Fi Direct, station mode and Soft-AP support
•Supports IEEE 802.11 WEP, WPA
•On-chip memory management engine to
reduce host load
•SPI, SDIO, UART and I2C as host interfaces
•WSC (wireless simple configuration WPS)
Certified WILC1000B Module
W/ uFL connector
ATWILC1000-SDRO extension
board to connect over SD/MMC
(SDIO) to peer host
ATWILC1000-SDPRO
App
+
Linux
Host
MCU/MPU
SDIO Driver
SPI / SDIO
SDIO Driver
API
22mm
WiFi Stack
15mm
Product Selection Guide
19
WINC1500 Network Controllers Series
WINC1500
MR210PB/UB
WINC1510
MR210PB/UB
WINC1500B
WINC1510B
MCU
MCU
UART, SPI
UART, SPI
Single Band 802.11n
ü
ü
WPS,WPA/WPA2
Supplicant
ü
ü
TCP/UPD, DNS, HTTP/
HTTPS, TLS
ü
ü
4M
8M
PCB/uFL
PCB/uFL
ü
ü
Wi-Fi SoC
External Host Type
External Host Interface
Stacked Flash
Antenna Design
OTA Upgrade
Dimensions
Key Features:
•IEEE 802.11 b/g/n (1x1) for up to 72 Mbps
•Integrated PA and T/R switch
•Superior sensitivity and range via advanced
PHY signal processing
•Wi-Fi Direct, station mode and Soft-AP support
•Supports IEEE 802.11 WEP, WPA
•On-chip memory management engine to
reduce host load
•4/8 Mbit stacked Flash memory with OTA
firmware upgrade
•SPI, UART and I2C as host interfaces
•TCP/IP protocol stack (client/server) sockets
applications
•Network protocols (DHCP/DNS), including
secure TLS stack
•WSC (wireless simple configuration WPS)
22 x15mm
Pin Out
28x castellation
Certification
FCC, IC, ETSI
Availability (MP)
NOW
Certified module used as a turn key add-on module adding Wi-Fi
connectivity to an existing system.
Host
Application
Socket API
Host MCU
SPI Driver
4KB Flash
1KB RAM
SPI,
UART
SPI Driver
API
22mm
TCP/IP
TLS
Wi-Fi Stack
15mm
20
© 2015 / www.atmel.com
Atmel | SMART SAM W25
Standalone Applications Wi-Fi Module
Key Features:
•IEEE 802.11 b/g/n (1x1) for up to 72 Mbps
•Integrated PA and T/R switch can operate
completely host-less in most applications
•Superior sensitivity and range via advanced
PHY signal processing
•Wi-Fi Direct, station mode and Soft-AP support
•Supports IEEE 802.11 WEP, WPA
•On-chip memory management engine
to reduce host load
•4 Mbit internal Flash memory with OTA
firmware upgrade
•SPI, UART and I2C as host interfaces
•TCP/IP protocol stack (client/server)
sockets applications
•Network protocols (DHCP/DNS), including
secure TLS stack
•WSC (wireless simple configuration WPS)
SAMW25H18
-MR210PB
SAMW25H18
-MR510PB
WINC1510B
WINC1510B
Embedded Host MCU
SAM D21
SAM D21
Single Band 802.11n
ü
ü
WPS,WPA/WPA2
Supplicant
ü
ü
TCP/UPD, DNS,
HTTP/HTTPS, TLS
ü
ü
CryptoAuthentication
(ECC508A)
-
ü
PCB
PCB
ü
ü
Wi-Fi SoC
Antenna Design
OTA Upgrade
Dimensions
34 x15mm
Pin Out
51 castellations
Certification
FCC, IC, ETSI, TELEC
Availability (MP)
NOW
Host
Application
4KB Flash
1KB RAM
Socket API
SPI Driver
SPI
34mm
SPI Driver
API
TCP/IP
TLS
Wi-Fi Stack
15mm
Product Selection Guide
21
Atmel | SMART SAMR21 ARM Cortex-M0+
with 2.4 GHz 802.15.4 Transceiver
Memories
Link Controller
•64/128/256/768 (256+512) flash
•8K/16K/32KB SRAM
CPU Core
ARM Cortex-M0+ @ 48MHz
Peripherals
Max PHY Rate
2Mbit
•4-SERCOM interfaces
•I2C, SPI, and USART
•4x16 bit timers
•4-Ch 12-bit ADC
•Analog comparator
Frequency
2.4GHz
Stacks
Bitcloud, Contiki, OpenWSN
Coming:mBED, Thread, iControl
Applications
Lighting, Sensor Networks, Home
Automation, ESL
Sleep Power Consumption
Interfaces
SPI, UART
•<150µA/MHz active (CoreMark®)
•<4µA with RTC and Full RAM retention
Tx/Rx Peak
13.8mA/11.8mA @ 3.0V
Tx Pout
+4dBrn
Rx Sensitivity
-99dBrn
Sleep Mode
<4uA (RTC+RAM)
Package
6x6 QFN48
5x5 QFN32
Power Supply
1.8V-3.6V
Temp Range
-40 to +125°C
Key features
•HW AES
•Automatic external FEM control, antenna diversity
•Capacitive touch HW engine (PTC)
•Integrated 32KHz crystal
•Ranging engine
Package Options
•32pin 5x5mm, 48pin 7x7mm
20mm
22
SAM R21
20mm
15mm
19mm
SAM R21 Lighting Module
SAM R21 Module
SAMR21B18MZ210PA
SAMR21G18MR210UA
Target Market
Lighting
General Purpose
Form Factor
15 x 20mm
19 x 20mm
Microcontroller
SAMR21E18
SAMR21G18
RF Output Power
+4dBm
+3.5dBm
Rx Sensitivity
-99dBm
-98dBm
Antenna
PCB trace
2 x UFL
Available I/O
5
17
Encryption
Temperature Range
ECC508A
-40C - +125C
-40C - +85C
© 2015 / www.atmel.com
Atmel Bluetooth SMART® Solutions
BLE Soc
BTLC1000
SAMB11
CPU Core
Cortex-M0 @
26MHz
Cortex-M0
w/256KB stacked
Flash
Max PHY Rate
1Mbps
1Mbps
Frequency
2.4GHz
2.4GHz
Stacks
Self Contained GATT
and GATT-based
profiles BLE 4.1
Self Contained
GATT and
GATT-based
profiles BLE 4.1
Applications
Wearable, IoT
Wearable, IoT
Interfaces
SPI, UART, I2C,
13/15 GPIO
SPI, UART, I2C,
30 GPIO
Tx/Rx Peak (mA)
<3/4mA @ 3.6V
<3/4mA @ 3.6V
Tx Pout
-30dBm to +4dBm
-30dBm to +4dBm
Rx Sensitivity
<-95dBm
<-95dBm
Sleep Mode
<1uA
<1uA
Package
4x4mm QFN 32L
2.25 x 2.15mm
WLCSP
6x6mm QFN 48L
Power Supply
(*)1.8V-4.3V
2.3-3.6V
Temp Range
-40 to +85° c
-40 to +85° c
Product Selection Guide
•Smallest, certified modules available on the market
•4.5x5.5mm ultra small form factor LGA package
•Integrates all BOM components except 32kHz
optional Xtal
•Available with integrated antenna on package or
with hookup for external antenna
23
Atmel Smart Metering
Highest Integration and
Flexibility
Best-in-class Metrology
Sensing
Signal Processing
Energy Measurement AFE
1ph/2ph/3ph
Global Smart Meter
Architectures
M90Exx
Application
Processor
Leading-edge
Connectivity
Protocol Processor
PLC,RF Transceiver
MCU
MCU/MPU
PRIME/G3
SAM4, SAMD
SAM4, SAMA5
SAM9
ATPL230,
ATPL250
Application & Communications Secure ASSP,
Dual Cortex – M4,
PRIME / G3
SAM4CP16
Analog Sensor
1ph/2ph/3ph
ATSENSE
Metrology & Application Secure ASSP
Dual Core Cortex-M4
SAM4C4/8/16/32
Sensors & Metrology & Application Secure ASSP
Dual Core Cortex-M4
1ph/3ph
SAM4CMS4/8/16/32
SAM4CMP8/16/32
24
AT86RF212B
AT86RF215M
2.4GHz
IEEE 802.15.4
AT86RF233
Dual-Band
IEEE 802.15.4g
AT86RF215
Home Area Network
(HAN)
IEEE 802.15.4, ZigBee,
PRIME, G3-PLC
WAN
Neighborhood/Metro
IEEE 802.15.4g,
PRIME,G3-PLC
Sub-1GHz
IEEE 802.15.4
HAN or
Neighborhood
IEEE 802.15.4(g),
ZigBee
© 2015 / www.atmel.com
Atmel Security Solutions
More than a simple password
Atmel Security
Solutions
•Trusted and Secure Communication
•Secure updates for FW and SW
•Establish and manage Trusted Keys
•Manage and track production builds
•Authentication and verification
•Secure Boot
•Maintain Platform Integrity
•Product Lifecycle Management
•Stored Protection of Data
Part Number
Description
Security
Customer
Application
Application
Atmel
Software
Solutions
IoT Comm. Stacks +
Third Party Cloud
Ultra Low Power Hardware
Integration
ATSHA204A
ATAES132A
ATECC508A
Secure authentication
and validation device
High-Security, serial EEPROM
providing authentication and
confidential nonvolatile storage
High speed PKI crypto engine
with secure key storage. FIPS186-3
Elliptic Curve Digital Signature
Algorithm (ECDSA) for ECC
Sign-Verify
ECDH
Runs FIPS SP800-56A ECDH
Algorithm
Function(s)
Authentication
Encryption/Authentication
Authentication and key exchange for
confidentiality and data integrity
Security Threats for IoT are Everywhere
We constantly hear about folks
“listening into networks”
for confidential information and data.
Through the server or
cloud with fake updates
or commands
MCUs
MPUs
Energy
Security
Sensing
Connectivity
Through a fake device
tracking back to the
gateway and cloud.
http://www.atmel.com/security
Product Selection Guide
25
Atmel Memory Solutions
Atmel AT21CS Serial EEPROMs
Powerful Capabilities
in a Tiny Package
AT21CS
Serial EEPROM
Flexible memory devices for a variety of applications to
store personal preference data, system calibration and
configuration data, and high endurance data logging.
Parallel EEPROM
Byte alterable, parallel access memory devices with
high endurance, long term data retention, and advanced
features that ensure high quality and manufacturability
of systems.
OTP EPROM
One-time Programmable (OTP) memory devices with
fast parallel access times to provide secure, unalterable
direct code execution memory.
In addition, Atmel offers a family of secure memory
solutions that are specifically designed to prevent
product counterfeiting and intellectual property theft.
CryptoMemory® EEPROMs
Memory solutions with a 64-bit embedded hardware
encryption engine, four sets of non-readable, 64-bit
authentication keys, and four sets of non-readable,
64-bit session encryption keys.
26
© 2015 / www.atmel.com
I2C
SPI
µWire
Single Wire
Device Family
AT24C/34Cxxx
AT25xxx
AT93Cxxx
AT21Cxxx
Densities
1-Kbit to 2-Mbit
1-Kbit to 2-Mbit
1-Kbit to 16-Kbit
1-Kbit
Voltage Range
1.7V to 5.5V
1.8V to 5.5V
(Will migrate to 1.7V)
1.7V to 5.5V
1.7V to 4.5V
Clock Frequency
Up to 1MHz
Up to 20MHz
Up to 2MHz
n/a (up to 125 kbps)
Available
Available
Available
Available
PDIP, SOIC, TSSOP,
SOT-23, DFN, BGA,
WLCSP
PDIP, SOIC, TSSOP,
DFN, BGA, WLCSP
PDIP, SOIC, TSSOP,
DFN, BGA, WLCSP
SOIC, SOT-23, WLCSP
Automotive Grade
Package Options
48-bit MAC/EUI and 64-bit EUI Series
The 2Kb, I2C-compatible Atmel AT24MAC402 and
AT24MAC602 Serial EEPROM devices are applicationspecific products that contain unique IEEE-provided
48-bit or 64-bit pre-programmed MAC/EUI addresses to
enable connected devices to connect to the Internet or
local network. The devices also contain a unique readonly 128-bit serial number and 2Kb of user-accessible
EEPROM non-volatile memory (NVM) storage.
128-bit Serial Number Devices.
The Atmel AT24CS Series devices are general-purpose
I²C-compatible Serial EEPROM devices that contain
an Atmel-provided pre-programmed unique read-only
128-bit serial number with 1Kb to 32Kb of useraccessible EEPROM NVM storage.
Product Selection Guide
27
Atmel Corporation
1600 Technology Drive, San Jose, CA 95110 USA
T : (+1)(408) 441. 0311
F : (+1)(408) 436. 4200
|
www.atmel.com
© 2015 Atmel Corporation. / Rev.: Atmel-45154B-Product-Selection-Guide_E_US_121815
Atmel,® Atmel logo and combinations thereof, Enabling Unlimited Possibilities,® and others are registered trademarks or trademarks of Atmel Corporation in U. S. and other
countries. ARM,® ARM Connected® logo and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and
reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not
suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.