REVISIONS NO. DESCRIPTION DATE BY 4.0 •See Note 1 2.0 •See Note 6 0.30 ±0.05 Ø1.5 +0.1/-0.0 A B B Ø1.5 MIN 1.75 R0.3 MAX Bo 5.5 •See Note 6 12.0 ±0.3 Section A-A Ao 8.0 R0.5 TYP 4.4 A 3.8 Ko K1 SECTION B-B Notes: 1. 10 sprocket hole pitch cumulative tolerance ±.02. 2. Camber not to exceed 1mm in 100mm. 3. Material: Black Conductive Advantek Polystyrene. 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. Ao = 6.8 mm Bo = 5.4 mm Ko = 1.6 mm K1 = 1.3 mm -All Dimensions in MillimetersAdvantek Part Number TSSO16-B Carrier Tape TOLERANCES (EXCEPT AS NOTED) a DECIMAL ± 0.1 FRACTIONAL DRAWN BY SDC SCALE 3:1 MATERIAL See Note 3 ± REFERENCE NO. ANGULAR DATE 5/2/97 DRAWING NO. A0502-97-2 ± REV