REVISIONS NO. DESCRIPTION DATE BY 4.0 •See Note 1 2.0 •See Note 6 Ø1.5 +0.1/-0.0 Ø1.5 MIN 1.75 0.30 ±0.05 A R0.3 MAX 7.5 •See Note 6 Bo 16.0 ±0.3 5.8 Ko 1.2 3.3 A R0.5 TYP Ao 8.0 Section A-A Notes: 1. 10 sprocket hole pitch cumulative tolerance ±.02. 2. Camber not to exceed 1mm in 100mm. 3. Material: PS + C. 4. Ao and Bo measured as indicated. 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. Ao = 4.9 mm Bo = 7.4 mm Ko = 2.0 mm -All Dimensions in MillimetersAdvantek Part Number CBGA14-A 14C1 CBGA Carrier Tape, Atmel Tool TOLERANCES (EXCEPT AS NOTED) DECIMAL ± 0.1 FRACTIONAL DRAWN BY RJB SCALE 3:1 MATERIAL See Note 3 ± REFERENCE NO. ANGULAR ± T-9190 DATE DRAWING NO. 10/5/99 T102527AT REV