4.0 0.30 ± 0.05 • SEE NOTE 1 1.75 2.0 Note 6 Ø1.5+0.1/-0.0 A 7.5 Note 6 R0.3 MAX. Bo 16.0 ± 0.3 Ko 12.0 R0.5 TYP A Ø1.50 MIN Ao SECTION A-A Ao = 8.45 mm Bo = 5.70 mm Ko = 2.35 mm Notes: 1. 10 sprocket hole pitch cumulative tolerance 2. Camber not to exceed 1mm in 100mm 3. Material: Conductive Black Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. - All Dimensions in Millimeters ± 0.2 REVISIONS TOLERANCES (EXCEPT AS NOTED) NO. DESCRIPTION 1 Changed from a "closed" to "open" tool. DECIMAL ± ±0.1 FRACTIONAL DATE Advantek Part Number Carrier Tape BY A 11/22/99 BTH SCALE DRAWN BY SDC ± REFERENCE NO. ANGULAR ± T-5085 SO8CAT-C 1 MATERIAL 1 inch = 10mm DATE see Note 3 DRAWING NO. REV 1/23/96 A0123-96-4 1