12,15 5,85 8,95 Verpackt im Gurt nach DIN IEC 60286-3 4,6 Ansaughaube Tape on Reel Packaging according to DIN IEC 60286-3 hood Verpackungseinheit: 220 Stück 15,3 13,8 16,5 2,75 1,5 Packaging unit: 220 pcs 330 1,2 Abspulrichtung - Reel off Direction 0,6 0,65 0,5 11 16 a1 0,15 0,8 3,675 ohne Ansaughaube 12,15 32 without hood Anforderungsstufe 1 Leiterplatten-Layout Vorschlag / PCB-layout proposal Performance Level 1 a1 Kontaktbereich vergoldet Mating Area gold plating 3x3=9 3 Anschlussbereich verzinnt 4-6 µm 0,6 ±0,05 1) 0,9 ±0,03 Terminal Area 4-6 µm tin plating 0,7 ±0,03 Koplanarität der Anschlüsse ≤ 0,1 mm 4,5 0,8 2 1,5 1 4x2=8 1) Durchmesser des Bohrers / Drill tool Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 0,75 Coplanarity Area of Termination ≤ 0,1 mm 2,6 1) 2 4x2=8 11 ±0,03 1 a5 Tolerances Information: Scale 5:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste THR, Powerm. 10mm Male Con. THR, Powerm. 10mm 214919 www.ERNI.com k 06.02.2014 Index Date Class MSPEED I A3