12,15 5,85 Ansaughaube 8,95 Verpackt im Gurt nach DIN IEC 60286-3 4,6 hood Tape on Reel Packaging according to DIN IEC 60286-3 1,5 Verpackungseinheit: 220 Stück 14,3 12,8 15,5 2,75 Packaging unit: 220 pcs 1,2 330 0,5 0,15 0,65 0,6 11 0,8 3,675 12,15 Abspulrichtung - Reel off Direction ohne Ansaughaube without hood 16 a1 2 Leiterplatten-Layout Vorschlag / PCB-layout proposal 4x2=8 a1 32 a5 Anforderungsstufe 1 Performance Level 1 11 ±0,03 1 3x3=9 Kontaktbereich vergoldet Anschlussbereich verzinnt 4-6 µm 1) 0,7 ±0,03 Terminal Area 4-6 µm tin plating Koplanarität der Anschlüsse ≤ 0,1 mm 0,75 0,9 ±0,03 Coplanarity Area of Termination ≤ 0,1 mm 0,8 2 1,5 1 4x2=8 1) Durchmesser des Bohrers / Drill tool Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 4,5 2,6 1) Mating Area gold plating 0,6 ±0,05 3 Tolerances Information: Scale 5:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste THR, Powerm. 9mm Male Con. THR, Powerm. 9mm 214918 www.ERNI.com k 07.02.2014 Index Date Class MSPEED I A3