AA-2063-7.5

AA-2063-7.5
The AA-2063-7.5 filter has been designed to operate with
the VICOR PFC MICRO. This filter was specifically
designed to allow the MIL COTS PFC MICRO to meet
the conducted emission requirements of Mil-Std-461D, E
or F.
The standard filter has a chassis mount enclosure but
the filter enclosure can be modified to add a connector
input or other terminals to suit your requirements.
The leads are Teflon but can be changed if the Teflon is
an issue.
The filter is lead free and RoHS.
Ordering Information
Standard Unit: AA-2063-7.5
Expanded Temperature Range: AA-2063-7.5HT
Operating Voltage = ___________________85 to 250 V~
Operating Current = ______________________ 7.5 Amp
Operating Frequency = __________________ 50/400 Hz
Operating Temperature, High = ______ See Temp.Curve
Operating Temperature, Low = ___________ -20º C, Std
= ____________-40º C, HT
Storage Temperature = ______________-40º C—100º C
Diel. Withstanding (L - Case) = _____________1500 Vac
Diel. Withstanding (L - L) = ________________1500 Vdc
Leakage Current = ____________ 1.2 ma @ 220V, 60Hz
Max. Residual Volt. after 1 sec = ____________ 34 Volts
Weight = _________________________________ 0.8 lb
Calculated MTBF= ________22,214,817 hrs. @ 30°C GB
Failure Rate = __________________________ 0.045015
USA
JMK Inc 15 Caldwell Dr. Amherst, NH 03031
EUR
JMK Inc
Glasgow, Scotland UK
INSERTION LOSS vs. FREQUENCY
PH: 603 886-4100
FX: 603 886-4115
email: [email protected]
PH: 44 (0) 7785-310729 FX: 44 (0) 1415-891884
Similar pages