EMC1133 SST Compliant Hardware Monitor with Three Temperature Channels & Three

EMC1133
SST Compliant
Hardware Monitor with
Three Temperature
Channels and Three
Voltage Channels
PRODUCT FEATURES
Data Brief
General Description
„
The EMC1133 is a one-wire sensor that is capable of
monitoring up to three voltages and three temperature
zones for an Intel PC platform containing an SST host.
The three temperature zones consist of an internal
temperature diode and two externally connected
temperature diodes. In cooperation with a host device,
thermal management and fan control can be performed.
Communication takes place over a one-wire SST based
interface. The internal 11-bit delta-sigma ADC
architecture provides superb linearity, high accuracy,
and excellent noise immunity.
„
„
0.125°C resolution
±1°C Accuracy (50°C to 70°C)
Diode Fault Reporting
Second External Diode configured to read a discrete
diode.
Internal Temperature Monitor
— Range -40°C to +125°C
— 0.125°C resolution
— ±2°C Accuracy (40°C to 70°C)
Voltage Monitor:
— 3.3V, 2.5V, VCCP inputs
— 2% Total Unadjusted Error
— 11-bit resolution
„
Single Wire Interface (SST based)
—
—
—
—
Resistance Error Correction
Ideality Configuration
Beta Compensation
Two External Temperature Monitors
—
—
—
—
Desktop PCs, Servers and Workstations
Features
„
„
„
Applications
„
„
Supply
— 3.0V to 3.6V
SST 1.0 compliant
Fixed Address, Discoverable Device
Three programmable addresses
Supports FCS Abort functionality not available in SST
0.9 compliant devices
Simplified Block Diagram
EMC1133
Switching
Current
Configuration
Register
DN1
External Temp
Registers
DN2
3.3V
2.5V
VCCP
Attenuator
bank
Internal
Temp
Diode
Analog Mux
and Anti-Alias Filter
DP2
11-bit
delta-sigma
ADC
Internal Temp
Register
Digital Mux
and
Byte Interlock
Voltage
Registers
ADD
SST One-Wire Interface
DP1
SST
Status Register
SMSC EMC1133
PRODUCT PREVIEW
Revision 2.58 (08-01-07)
SST Compliant Hardware Monitor with Three Temperature Channels and Three Voltage Channels
ORDER NUMBER:
PART NUMBER
FEATURES
PACKAGE
EMC1133-AIZL-TR
External Diode 1 configured to monitor 65nm CPU
External diode 2 configured to monitor 2N3904
10 pin MSOP Lead-Free, ROHS
Compliant
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123
Copyright © 2007 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 2.58 (08-01-07)
2
PRODUCT PREVIEW
SMSC EMC1133
REVISIO N HISTORY
R E VISION
5
3
D
PIN 1 IDENTIFIER
AREA (D/2 X E1/2)
e
E1
3
4
2
D ESC R IPTION
A
c
IN ITIA L RELEASE
D ATE
R ELE AS ED BY
3/29/05
S.K .ILIEV
4
E
SEE DETAIL "A"
10X b
END VIEW
TOP VIEW
3
PRODUCT PREVIEW
A2
A
C
SEATING PLANE
A1
ccc C
3-D VIEW
SIDE VIEW
H
C
GAU GE PLANE
0.25
NO TES:
1. ALL DIM ENSIONS ARE IN MILLIM ETER.
2. TOLERANCE ON THE TRUE POSITION OF EACH LEAD IS ± 0.04 m m AT M AXIMUM MATERIAL
CONDITION.
3. PA CKAGE BODY DIM ENSIONS "D" AND "E1" DO NOT INCLUDE MOLD/INTERLEAD PROTRUSIONS
OR FLASH. M AX IM UM M OLD PROTRUSIONS OR FLASH IS 0.15 m m (0.006 INCHES) PER END AND
SIDE. DIM ENSIONS "D" AND "E1" ARE DE TERMINED AT THE OUTERMOS T EXTREMES OF THE
PLASTIC B ODY, INCLUDING ANY MISMATCH BETWEEN TOP AND BOTTOM PLASTIC B ODY. THEY
ARE DE TERMINED AT DATUM PLA NE "H".
4. DIMENSIONS "b" A ND "c" APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 mm AND
0.15 m m FROM THE LEAD TIP.
5. DETAILS OF THE PIN 1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED W ITHIN THE ZONE
INDICA TED.
SEATING PLANE
0° - 8°
L
U N LES S O TH ER W ISE SPECIFIED
D IM EN S IO NS A RE IN MILLIMETERS
AN D TO LERANCES ARE:
(0.95)
D EC IMAL
X.X
±0.1
X.XX
±0.05
X.X XX ±0.025
THIRD A NGLE P ROJE CT ION
80 A R KAY DRIVE
H AU P PAU G E, N Y 11788
U SA
A N G U LAR
±1°
TITLE
DETAIL "A"
NAME
D IM AN D TO L P ER A SM E Y14.5M - 1994
M A TE RIAL
F IN ISH
-
DATE
S.K.ILIEV
3/29/05
C HECKED
S.K.ILIEV
SMSC EMC1133
S.K.ILIEV
REV
D WG NUM BER
MO-10-TSSOP-3x3
3/29/05
A PPR OVED
P RIN T W ITH "S C ALE TO FIT"
D O N O T S C ALE DRAW ING
PACKAGE O UTLINE
10 PIN TSSO P, 3x3 MM BODY, 0.50 M M PITCH
DRAWN
SCALE
3/29/05
Figure 1 EMC1133 10-Pin MSOP Package Drawing
S TD C OM PLIANCE
1:1
JEDEC: MO -187
A
SHEET
1 OF 1
SST Compliant Hardware Monitor with Three Temperature Channels and Three Voltage Channels
Revision 2.58 (08-01-07)
Package Outline
Similar pages