Solid State Relays G3FM CSM_G3FM_DS_E_5_2 100-μA-max. Leakage Current, No Bleeder Resistor Required • Reduces wiring work by 60% when combined with the PFY-08PU Push-In Plus Socket (according to actual OMRON measurements). • 1 mA to 500 mA micro-load switching. • Switch to both AC and DC with no polarity. • Switch for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC. • Switch full- and half-wave rectifier AC loads. • Same sizes and terminal arrangements as OMRON Power Relay MY Series. • Switch MY Series (without bleeder resistor). • Superior surge absorption with a built-in varistor. • Optimum SSR to control minute load, valves, and solenoids. Note: The socket is optional. Refer to Safety Precautions for All Solid State Relays. Model Number Structure ■ Model Number Legend G3FM-@@@@@ 1 2 3 4 5 6 1. Basic Model Name G3FM: Solid State Relay 2. Rated Load Power Supply Voltage 2: 200 VAC 3. Rated Load Current R5: 0.5 A 4. Terminal Type S: Plug-in terminals 5. Zero Cross Function L: Not equipped with zero cross function 6. Operation Indicator N: Equipped with operation indicator Ordering Information ■ List of Models Isolation Photo-voltage coupler No Zero cross function Indicator Yes Rated output load 0.5 A at 24 to 240 VAC 0.5 A at 24 to 110 VDC Rated input voltage 5 VDC Model G3FM-2R5SLN 12 VDC 24 VDC Note: When ordering, specify the rated input voltage. 1 G3FM ■ Accessories (Order Separately) Connection Sockets Classification Front-mounting Back-mounting Terminal type Appearance Model Screw terminals (finger protection structure) PYF08A-E Screw terminals (finger protection structure) PYF08A-N Screw terminals PYF08A Push-In Plus terminal blocks (Socket combination) PYF-08-PU Relays with PCB Terminals PY08-02 Refer to Common Socket and DIN Track Products for details on Connection Sockets and DIN Track products (sold separately) of your OMRON website. Refer to PYF@@-PU/P2RF-@@-PU for details on A Push-In Plus Terminal Block Socket of your OMRON website. Hold-down Clips Applicable Socket Classification Hold-down Clips Terminal type Model For front-mounting Screw terminals (finger protection structure) Screw terminals PYF08A For back-mounting Relays with PCB Terminals PY08-02 Model * PYF08A-E and PYF08A-N PYC-A1 PYC-P * PYC-A1 is provided with two clips. DIN Track Mounting Parts Classification/ division For front-mounting Type DIN Tracks Appearance Model Shallow type, total length: 1 m PFP-100N Shallow type, total length: 0.5 m PFP-50N Deep type, total length: 1 m PFP-100N2 End Plate PFP-M Spacer PFP-S 2 G3FM Specifications ■ Ratings (at an Ambient Temperature of 25°C) Model Input Rated voltage G3FM-2R5SLN Operating voltage Output Impedance Voltage levels Must operate voltage Applicable load Must release Rated load voltage voltage 5 VDC 4 to 6 VDC 250 Ω±20% 4 VDC max. 12 VDC 9.6 to 14.4 VDC 600 Ω±20% 9.6 VDC max. 24 VDC 19.2 to 28.8 VDC 1.2 kΩ±20% 19.2 VDC 1 VDC min. 24 to 240 VAC 24 to 110 VDC Load voltage range 19.2 to 264 VAC 19.2 to 125 VDC Load current 1 to 500 mA at 40°C Inrush current 6A (10 ms) ■ Characteristics Operate time 5 ms max. Release time 10 ms max. Output ON voltage drop 3 V (RMS) max. Leakage current 0.1 mA max. (at 200 VAC) Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 1,500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 to 10 Hz, 0.75-mm single amplitude Shock resistance Ambient temperature 1,000 m/s2 Operating: –30°C to 80°C (with no icing or condensation) Storage: –30°C to 100°C (with no icing or condensation) Ambient humidity Operating: 45% to 85% Weight Approx. 50 g Engineering Data Load Current vs. Ambient Temperature Characteristics One Cycle Surge Current: Non-repetitive Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3FM-2R5SLN Load current (A) Inrush current (A. Peak) G3FM-2R5SLN Ambient temperature (°C) Energized time (ms) 3 G3FM Dimensions Note: All units are in millimeters unless otherwise indicated. ■ Relay Terminal Arrangement/Internal Connections (Bottom View) 1 28 max. 4 5 21.5 max. 9 36.5 max. 42.5 max. 13 8 Load Input − − Load Load power supply 12 14 + Input voltage + ■ Accessories (Order Separately) Connection Socket Hold-down Clips DIN Track Mounting Parts Refer to Products Related to Common Sockets and DIN Tracks for precautions on the applicable Sockets of your OMRON website. Refer to PYF-@@-PU/P2RF-@@-PU for precautions on Push-In Plus Terminal Block Sockets of your OMRON website. Safety Precautions Be sure to read 'the Common Precautions' in the website at the following URL: http://www.ia.omron.com/. Refer to the Common Solid State Relay Precautions for common precautions of your OMRON website. Refer to Products Related to Common Sockets and DIN Tracks for precautions on the applicable Sockets of your OMRON website. Refer to PYF-@@-PU/P2RF-@@-PU for precautions on Push-In Plus Terminal Block Sockets of your OMRON website. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 4 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2016.6 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2016 All Right Reserved.