Materials Declaration Package Body Size Ball Count Option CSP_BGA 17 X 17 mm 316 96.5Sn/3Ag/0.5Cu Ball Size 0.45 mm Item SiO2 Filler Epoxy resin Phenol Resin Metal Hydroxide Carbon Black Subtotal Item BT Resin Glass fiber Cu Ni Soldermask Au Molding Compound % of Compound 86.2 6.0 6.0 1.5 0.3 Laminate % of Laminate 27.0 25.0 18.0 11.0 11.0 8.0 Molding Compound Weight (g) 8.38 E-01 5.83 E-02 5.83 E-02 1.46 E-02 2.92 E-03 9.72 E-01 PPM 634410 44158 44158 11040 2208 735974 Item Pb Cd Hg Cr+6 PBB PBDE PPM Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected Weight (g) 5.02E-02 4.65E-02 3.35E-02 2.05E-02 2.05E-02 1.49E-02 1.86E-01 PPM 38025 35209 25350 15492 15492 11267 140835 Item Pb Cd Hg Cr+6 PBB PBDE PPM Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected Item Pb Cd Hg Cr+6 PBB PBDE PPM Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected Method EPA Method 3051A/3052. ICP-OES EPA Method 3051A/3052. ICP-OES EPA Method 3051A/3052. ICP-OES EPA Method 3060A & 7196A. UV-VIS EPA 3540C/3550C. Analysis was performed by GC/MS EPA 3540C/3550C. Analysis was performed by GC/MS Die Attach Paste Method EPA Method 3051A/3052. ICP-OES EPA Method 3051A/3052. ICP-OES EPA Method 3051A/3052. ICP-OES EPA Method 3060A & 7196A. UV-VIS EPA 3540C/3550C. Analysis was performed by GC/MS EPA 3540C/3550C. Analysis was performed by GC/MS Laminate Sn Ag Cu Subtotal Solder Ball % of Solder Ball 96.5 3.0 0.5 Weight (g) 1.08 E-01 3.35 E-03 5.58 E-04 1.12 E-01 PPM 81555 2536 423 84514 Au Bond Wires % of Wire 99.99 Weight (g) 6.51 E-03 PPM 4932 Si Chip % of Chip 100.0 Weight (g) 2.65 E-02 PPM 20041 Weight (g) 1.36 E-02 2.17 E-03 9.05 E-04 9.05 E-04 5.43 E-04 1.81 E-02 PPM 10279 1645 685 685 411 13705 Item Silver Diester Epoxy resin Functionalized ester Functionalized urethane Subtotal Die Attach % of Die Attach 75.0 12.0 5.0 5.0 3.0 Package Totals PPM Weight (g) 1000000 1.32 E+00 Note: The information provided in this declaration are true to the best of ADI's knowledge. ADI derived most of the information listed in this declaration from documents provided by third parties, and assumes no liability to any inaccuracy of such information. ADI Proprietary Method US EPA Method 3052. ICP-OES US EPA Method 3052. ICP-OES US EPA Method 3052. ICP-OES US EPA Method 3060A & 7196A. UV-VIS Analysis was performed by GC/MS Analysis was performed by GC/MS