Dual 3A, 2.5MHz, 42V Boost/Inverting DC/DC Converter with Fault Protection

News Release ⎜ www.linear.com
Dual 3A, 2.5MHz, 42V Boost/Inverting DC/DC
Converter with Fault Protection
MILPITAS, CA – January 25, 2012 – Linear Technology Corporation announces the LT8582, a
dual independent channel, step-up DC/DC converter with integrated fault protection features for
output shorts, input/output overvoltages, and overtemperature conditions. Each channel of the
LT8582 uses two integrated 42V switches: a 1.7A master switch and a 1.3A slave switch that can
be tied together for a total current limit of 3A. The LT8582 operates from an input voltage range
of 2.5V to 22V with transient protection to 40V, making it suitable for applications with input
sources ranging from a single-cell Li-Ion to automotive inputs. The LT8582 is ideal for many
local power supply designs as each channel can be independently configured as either a boost,
SEPIC, inverting or flyback converter. The combination of a 4mm x 7mm DFN package and tiny
externals ensures a very compact footprint while minimizing solution cost.
The LT8582’s low VCESAT switches, 0.27V (tied together at 2.75A) can deliver
efficiencies up to 90%. A power good pin is offered for ease of use when event-based
sequencing is required. For high voltage outputs, the LT8582’s slave switch enables high power
charge pump topologies which are very efficient and require few external components. The
LT8582’s switching frequency can be programmed via a single resistor or synchronized to an
external clock between 200kHz and 2.5MHz, minimizing external component sizes and avoiding
“noise critical” frequency bands. Undervoltage lockout (UVLO) is user adjustable for optimal
system performance. Each channel requires a single feedback resistor to set the output voltage,
minimizing external components. Other features include external synchronization capability,
output short circuit protection and frequency foldback.
The LT8582EDKD is available in a 7mm x 4mm DFN-24 package and is priced at $3.75
each for 1,000 piece quantities. An industrial temperature (-40°C to 125°C) version, the
LT8582IDKD, is priced at $4.13 each for 1,000 piece quantities. Both versions are available
from stock. For more information, visit www.linear.com/product/LT8582
Dual 3A, 2.5MHz, 42V Boost/Inverting DC/DC
Converter with Fault Protection
page 2
Photo Caption: Dual 3A, 42V Boost, Inverting or SEPIC DC/DC Converter
Summary of Features: LT8582
•
•
•
•
•
•
•
•
•
•
•
•
Dual 42V, 3A Combined Power Switch
Master/Slave (1.7A/1.3A) Switch Design
Wide Input Range: 2.5V to 22V Operating, 40V Maximum Transient
Power Good Pin for Event-Based Sequencing
Switching Frequency Up to 2.5MHz
Each Channel Easily Configurable as a Boost, SEPIC, Inverting or Flyback Converter
Low VCESAT Switch: 270mV at 2.75A (Typical)
Can be Synchronized to an External Clock
Output Short-Circuit Protection
High Gain SHDN Pin Accepts Slowly Varying Input Signals
24-Pin 7mm × 4mm DFN Package
Dual 3A, 42V Boost/Inverting DC/DC Converter with Integrated Fault Protection
About Linear Technology
Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing
and marketing a broad line of high performance analog integrated circuits for major companies
worldwide for three decades. The Company’s products provide an essential bridge between our
analog world and the digital electronics in communications, networking, industrial, automotive,
computer, medical, instrumentation, consumer, and military and aerospace systems. Linear
Technology produces power management, data conversion, signal conditioning, RF and interface
ICs, µModule® subsystems, and wireless sensor network products. For more information, visit
www.linear.com
Press Contacts:
North America / Worldwide
UK & Nordic
John Hamburger, Director Marketing
Communications
[email protected]
Tel: 408-432-1900 ext 2419
Alan Timmins
[email protected]
Tel: +44-1-252-629937
Doug Dickinson, Media Relations Manager
[email protected]
Tel: 408-432-1900 ext 2233
Similar pages