PDF Data Sheet Rev. 0

High Voltage, Precision
Operational Amplifier
ADA4700-1
Data Sheet
PIN CONFIGURATION
Low input offset voltage: 0.2 mV typical
High output current drive: 30 mA
Wide range of operating voltage: ±5 V to ±50 V
High slew rate: 20 V/µs typical
High gain bandwidth product: 3.5 MHz typical
Thermal regulation at junction temperature >145°C
Ambient temperature range: −40°C to +85°C
Low input bias current ≤ 15 nA typical
NC
1
–IN
2
+IN
3
V–
4
ADA4700-1
TOP VIEW
(Not to Scale)
8
NC
7
V+
6
OUT
5
NC
NOTES
1. NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
2. CONNECT EXPOSED PAD TO V–
OR LEAVE FLOATING.
APPLICATIONS
11551-001
FEATURES
Figure 1.
Automated and bench top test equipment
High voltage regulators and power amplifiers
Data acquisition and signal conditioning
Piezo drivers and predrivers
General-purpose current sensing
GENERAL DESCRIPTION
5
OUTPUT
40
4
30
3
20
2
10
1
0
0
–10
–1
–20
–2
–30
–3
ADA4700-1
VSY = ±50V
AV = 20V/V
RL = 2kΩ
–40
–50
0
5
10
15
20
INPUT (V)
INPUT
–4
25
TIME (µs)
30
35
–5
40
11551-200
The ADA4700-1 is designed for applications requiring both ac and
dc precision performance, making the ADA4700-1 useful in a
wide variety of applications, including high voltage test equipment
and instrumentation, high voltage regulators and power amplifiers,
power supply control and protection, and as an amplifier or buffer
for transducers with wide output ranges. It is particularly well
suited for high intensity LED testing applications where it provides
highly accurate voltage and current feedback as well as a predriver
to provide accurate voltage and/or current sourcing stimulus to
the LED string under test.
50
OUTPUT (V)
The ADA4700-1 is a high voltage, precision, single-channel
operational amplifier with a wide operating voltage range (±5 V
to ±50 V) and relatively high output current drive. Its advanced
design combines low power (170 mW for a ±50 V supply), high
bandwidth (3.5 MHz), and a high slew rate with unity-gain stability
and phase inversion free performance. The ability to swing near
rail to rail at the output enables designers to maximize signalto-noise ratios (SNRs).
Figure 2. Slew Rate
The ADA4700-1 is specified over the industrial temperature range
of −40°C to +85°C and includes thermal regulation at a junction
temperature greater than 145°C and an integrated current limit.
The ADA4700-1 is available in a thermally enhanced, 8-lead SOIC
package with an exposed pad.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADA4700-1
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ........................................... 10
Applications ....................................................................................... 1
Test Circuits..................................................................................... 20
Pin Configuration ............................................................................. 1
Theory of Operation ...................................................................... 21
General Description ......................................................................... 1
Thermal Regulation ................................................................... 21
Revision History ............................................................................... 2
Applications Information .............................................................. 22
Specifications..................................................................................... 3
Thermal Management ............................................................... 22
VSY = ±50 V Electrical Characteristics ....................................... 3
Safe Operating Area ................................................................... 22
VSY = ±24 V Electrical Characteristics ....................................... 5
Driving Capacitive Loads .......................................................... 23
VSY = ±5 V Electrical Charateristics ........................................... 7
Increasing Current Drive .......................................................... 24
Absolute Maximum Ratings ............................................................ 8
Constant Current Applications ................................................ 24
Thermal Resistance ...................................................................... 8
Outline Dimensions ....................................................................... 25
ESD Caution .................................................................................. 8
Ordering Guide .......................................................................... 25
Pin Configuration and Function Descriptions ............................. 9
REVISION HISTORY
8/13—Revision 0: Initial Version
Rev. 0 | Page 2 of 28
Data Sheet
ADA4700-1
SPECIFICATIONS
VSY = ±50 V ELECTRICAL CHARACTERISTICS
VSY = ±50 V, VCM = 0 V, TA = 25°C, unless otherwise specified.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Test Conditions/Comments
Min
VOS
Offset Voltage Drift 1
Input Bias Current
ΔVOS/ΔT
IB
Input Offset Current
IOS
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +85°C
Typ
Max
Unit
0.2
2
2.5
13
30
50
25
30
(V+) − 3
mV
mV
µV/°C
nA
nA
nA
nA
V
dB
dB
dB
dB
2
15
−40°C ≤ TA ≤ +85°C
Input Voltage Range
Common-Mode Rejection Ratio
IVR
CMRR
Large Signal Voltage Gain
AVO
Input Impedance
Common-Mode
Differential
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Capacitive Load Drive 2
Output Current Drive 3
Short-Circuit Limit
Closed-Loop Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
2
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +85°C
(V−) + 3 V ≤ VCM ≤ (V+) – 3 V
−40°C ≤ TA ≤ +85°C
−47 V ≤ VOUT ≤ +47 V, RL = 2 kΩ
−40°C ≤ TA ≤ +85°C
(V−) + 3
103
103
103
100
RIN||CINCM
RIN||CINDM
VOH
VOL
CL
IOUT
ISC
ZOUT
PSRR
RL = 10 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 2 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 10 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 2 kΩ to GND
−40°C ≤ TA ≤ +85°C
AV = +1
48.0
47.8
47.5
47.3
ISY
106
2.3||5.3
2.3||0.5
MΩ||pF
MΩ||pF
48.5
V
V
V
V
V
V
V
V
nF
mA
mA
Ω
48.0
−48.5
−48.0
110
110
130
1.7
−40°C ≤ TA ≤ +85°C
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
Unity-Gain Crossover
−3 dB Bandwidth
Phase Margin
Settling Time to 0.1%
Settling Time to 0.01%
SR
GBP
UGC
−3 dB
ΦM
tS
tS
VIN = ±45 V p-p, AV = +1, RL = 2 kΩ, CL = 300 pF
VIN = 5 mV p-p, AV = +100
VIN = 5 mV p-p, AV = +1
VIN = 5 mV p-p, AV = −1
VIN = 5 mV p-p, RL = 1 MΩ, CL = 35 pF, AV = −1
VIN = 30 V p-p, RL = 10 kΩ, CL = 5 pF, AV = −1
VIN = 30 V p-p, RL = 10 kΩ, CL = 5 pF, AV = −1
Rev. 0 | Page 3 of 28
−48.0
−47.8
−47.5
−47.3
1
30
+72/−65
0.001
Sourcing/Sinking
f = 100 Hz, AV = +1
VSY = ±4.5 V to ±55 V
−40°C ≤ TA ≤ +85°C
108
20
3.5
2.6
4.8
70
4
8
2.2
2.4
dB
dB
mA
mA
V/µs
MHz
MHz
MHz
Degrees
µs
µs
ADA4700-1
Parameter
NOISE PERFORMANCE
Total Harmonic Distortion + Noise
Data Sheet
Symbol
Test Conditions/Comments
THD + N
AV = +1, VIN = 10 V p-p at 1 kHz, RL = 10 kΩ,
bandwidth = 80 kHz
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 10 Hz
f = 1 kHz
Peak-to-Peak Noise
Voltage Noise Density
en p-p
en
Current Noise Density
in
Min
Typ
Max
0.0002
%
800
14.7
27
400
nV p-p
nV/√Hz
nV/√Hz
fA/√Hz
See Figure 7 through Figure 9.
Overshoot vs. temperature and capacitive load performance is shown in Figure 27 through Figure 30. Refer to the Driving Capacitive Loads section for
recommendations on driving capacitive loads greater than 1 nF.
3
Refer to the Safe Operating Area section.
1
2
Rev. 0 | Page 4 of 28
Unit
Data Sheet
ADA4700-1
VSY = ±24 V ELECTRICAL CHARACTERISTICS
VSY = ±24 V, VCM = 0 V, TA = 25°C, unless otherwise specified.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Test Conditions/Comments
Min
VOS
Offset Voltage Drift 1
Input Bias Current
ΔVOS/ΔT
IB
Input Offset Current
IOS
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +85°C
Typ
Max
Unit
0.2
2
2.5
15
30
50
25
30
(V+) − 3
mV
mV
µV/°C
nA
nA
nA
nA
V
dB
dB
dB
dB
2.5
5
−40°C ≤ TA ≤ +85°C
Input Voltage Range
Common-Mode Rejection Ratio
IVR
CMRR
Large Signal Voltage Gain
AVO
Input Impedance
Common-Mode
Differential
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Capacitive Load Drive 2
Output Current Drive
Short-Circuit Limit 3
Closed-Loop Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
2
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +85°C
(V−) + 3 V ≤ VCM ≤ (V+) – 3 V
−40°C ≤ TA ≤ +85°C
−21 V ≤ VOUT ≤ +21 V, RL = 2 kΩ
−40°C ≤ TA ≤ +85°C
(V−) + 3
100
100
103
100
RIN||CINCM
RIN||CINDM
VOH
VOL
CL
IOUT
ISC
ZOUT
PSRR
RL = 10 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 2 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 10 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 2 kΩ to GND
−40°C ≤ TA ≤ +85°C
AV = +1
22.2
22.0
22.0
21.8
ISY
105
2.3||5.3
2.3||0.5
MΩ||pF
MΩ||pF
22.5
V
V
V
V
V
V
V
V
nF
mA
mA
Ω
22.4
−22.5
−22.4
110
110
130
1.65
−40°C ≤ TA ≤ +85°C
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
Unity-Gain Crossover
−3 dB Bandwidth
Phase Margin
Settling Time to 0.1%
Settling Time to 0.01%
SR
GBP
UGC
−3 dB
ΦM
tS
tS
VIN = ±20 V p-p, AV = +1, RL = 2 kΩ, CL = 300 pF
VIN = 5 mV p-p, AV = +100
VIN = 5 mV p-p, AV = +1
VIN = 5 mV p-p, AV = −1
VIN = 5 mV p-p, RL = 1 MΩ, CL = 35 pF, AV = −1
VIN = 20 V p-p, RL = 10 kΩ, CL = 5 pF, AV = −1
VIN = 20 V p-p, RL = 10 kΩ, CL = 5 pF, AV = −1
Rev. 0 | Page 5 of 28
−22.2
−22.0
−22.0
−21.8
1
30
+72/−65
0.001
Sourcing/Sinking
f = 100 Hz, AV = +1
VSY = ±4.5 V to ±55 V
−40°C ≤ TA ≤ +85°C
103
20
3.5
2.6
4.8
70
4
9
2.1
2.3
dB
dB
mA
mA
V/µs
MHz
MHz
MHz
Degrees
µs
µs
ADA4700-1
Parameter
NOISE PERFORMANCE
Total Harmonic Distortion + Noise
Data Sheet
Symbol
Test Conditions/Comments
THD + N
AV = +1, VIN = 10 V p-p at 1 kHz, RL = 10 kΩ,
bandwidth = 80 kHz
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 10 Hz
f = 1 kHz
Peak-to-Peak Noise
Voltage Noise Density
en p-p
en
Current Noise Density
in
Min
Typ
Max
0.0002
%
800
14.7
27
400
nV p-p
nV/√Hz
nV/√Hz
fA/√Hz
See Figure 7 through Figure 9.
Overshoot vs. temperature and capacitive load performance is shown in Figure 27 through Figure 30. Refer to the Driving Capacitive Loads section for
recommendations on driving capacitive loads greater than 1 nF.
3
Refer to the Safe Operating Area section.
1
2
Rev. 0 | Page 6 of 28
Unit
Data Sheet
ADA4700-1
VSY = ±5 V ELECTRICAL CHARATERISTICS
VSY = ±5 V, VCM = 0 V, TA = 25°C, unless otherwise specified.
Table 3.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Offset Voltage Drift1
Input Bias Current
Symbol
Test Conditions/Comments
Min
VOS
ΔVOS/ΔT
IB
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +85°C
Typ
Max
Unit
0.2
2
2.5
mV
mV
μV/°C
nA
nA
nA
nA
V
dB
dB
dB
dB
3
5
−40°C ≤ TA ≤ +85°C
Input Offset Current
IOS
Input Voltage Range
Common-Mode Rejection Ratio
IVR
CMRR
Large Signal Voltage Gain
AVO
Input Impedance
Common-Mode
Differential
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Capacitive Load Drive2
Output Current Drive
Short Circuit Limit3
Closed-Loop Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
2
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +85°C
−2 V ≤ VCM ≤ +2 V
−40°C ≤ TA ≤ +85°C
−2 V ≤ VOUT ≤ +2 V, RL = 2 kΩ
−40°C ≤ TA ≤ +85°C
−2
86
86
97
95
RIN||CINCM
RIN||CINDM
VOH
VOL
CL
IOUT
ISC
ZOUT
PSRR
RL = 2 kΩ to GND
−40°C ≤ TA ≤ +85°C
RL = 2 kΩ to GND
−40°C ≤ TA ≤ +85°C
AV = +1
3.4
3.2
ISY
89
99
2.3||5.3
2.3||0.5
MΩ||pF
MΩ||pF
3.6
V
V
V
V
nF
mA
mA
Ω
−3.6
110
110
130
1.5
−40°C ≤ TA ≤ +85°C
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
Unity-Gain Crossover
−3 dB Bandwidth
Phase Margin
Settling Time to 0.1%
NOISE PERFORMANCE
Total Harmonic Distortion + Noise
Peak-to-Peak Noise
Voltage Noise Density
Current Noise Density
−3.4
−3.2
1
30
+72/−65
0.003
Sourcing/Sinking
f = 100 Hz, AV = +1
VSY = ±4.5 V to ±55 V
−40°C ≤ TA ≤ +85°C
30
50
25
30
+2
2
2.2
dB
dB
mA
mA
SR
GBP
UGC
−3 dB
ΦM
tS
VIN = ±2 V p-p, AV = +1, RL = 2 kΩ, CL = 300 pF
VIN = 5 mV p-p, AV = +100
VIN = 5 mV p-p, AV = +1
VIN = 5 mV p-p, AV = −1
VIN = 5 mV p-p, RL = 1 MΩ, CL = 35 pF, AV = −1
VIN = 6 V p-p, RL = 10 kΩ, CL = 5 pF, AV = −1
18
3.5
2.6
4.8
70
1.5
V/μs
MHz
MHz
MHz
Degrees
μs
THD + N
AV = +1, VIN = 2 V p-p at 1 kHz, RL = 10 kΩ,
bandwidth = 80 kHz
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 1 kHz
0.0005
%
800
14.7
400
nV p-p
nV/√Hz
fA/√Hz
en p-p
en
in
1
See Figure 7 through Figure 9.
Overshoot vs. temperature and capacitive load performance is shown in Figure 27 through Figure 30. Refer to the Driving Capacitive Loads section for
recommendations on driving capacitive loads greater than 1 nF.
3
Refer to the Safe Operating Area section.
2
Rev. 0 | Page 7 of 28
ADA4700-1
Data Sheet
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 4.
Parameter
Supply Voltage
Input Voltage
Input Current
Differential Input Voltage
Storage Temperature Range
Operating Temperature Range1
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
ESD
Charged Device Model (CDM)
Human Body Model (HBM)
Machine Model (MM)
1
Rating
110 V
V− ≤ VIN ≤ V+
±10 mA
V− ≤ VIN ≤ V+
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
1250 V
4500 V
200 V
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages. The
values in Table 5 were obtained per JEDEC standard JESD51.
Table 5. Thermal Resistance
Package Type
8-Lead SOIC_N_EP
θJA
45
θJC
30
Unit
°C/W
Board layout impacts thermal characteristics such as θJA. When
proper thermal management techniques are used, a better θJA
can be achieved. Refer to the Thermal Management section for
additional information.
Although the exposed pad can be left floating, it must be
connected to an external V− plane for proper thermal
management.
Refer to the Thermal Management section.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. 0 | Page 8 of 28
Data Sheet
ADA4700-1
NC
1
–IN
2
+IN
3
V–
4
ADA4700-1
TOP VIEW
(Not to Scale)
8
NC
7
V+
6
OUT
5
NC
NOTES
1. NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
2. CONNECT EXPOSED PAD TO V–
OR LEAVE FLOATING.
11551-003
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 3. Pin Configuration
Table 6. Pin Function Descriptions
Pin No.
1, 5, 8
2
3
4
6
7
9
Mnemonic
NC
−IN
+IN
V−
OUT
V+
EPAD
Description
No Connect. Do not connect to these pins.
Inverting Input.
Noninverting Input.
Negative Supply Voltage.
Output.
Positive Supply Voltage.
Exposed Pad. Connect the exposed pad to V− or leave floating. The exposed pad is electrically connected to the device.
Rev. 0 | Page 9 of 28
ADA4700-1
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
TA = 25°C, unless otherwise noted.
90
ADA4700-1
VSY = ±5V
VCM = 0V
MEAN: 2.7µV/°C
25
70
NUMBER OF AMPLIFIERS
NUMBER OF AMPLIFIERS
80
30
ADA4700-1
VSY = ±5V
VCM = 0V
MEAN = 115µV
60
50
40
30
20
15
10
20
5
–1000
–500
0
500
1000
1500
VOS (µV)
0
11551-004
0
–1500
1
2
3
4
5
6
7
8
9
10
11
12
TCVOS (μV/°C)
Figure 4. Input Offset Voltage Distribution, VSY = ±5 V
Figure 7. Input Offset Voltage Drift Distribution, VSY = ±5 V
100
35
ADA4700-1
V = ±24V
90 VSY = 0V
CM
MEAN = 150µV
80
ADA4700-1
VSY = ±24V
VCM = 0V
MEAN: 2.4µV/°C
30
NUMBER OF AMPLIFIERS
NUMBER OF AMPLIFIERS
0
11551-008
10
70
60
50
40
30
25
20
15
10
20
5
–1000
–500
0
500
1000
1500
VOS (µV)
0
11551-097
0
–1500
0
4
5
6
7
8
40
ADA4700-1
VSY = ±50V
VCM = 0V
MEAN = 80µV
9
10
11
12
ADA4700-1
VSY = ±50V
VCM = 0V
MEAN: 2.0µV/°C
NUMBER OF AMPLIFIERS
35
70
60
50
40
30
30
25
20
15
10
20
0
–1500
–1000
–500
0
500
1000
1500
VOS (µV)
Figure 6. Input Offset Voltage Distribution, VSY = ±50 V
0
0
1
2
3
4
5
6
7
8
9
10
11
12
TCVOS (μV/°C)
Figure 9. Input Offset Voltage Drift Distribution, VSY = ±50 V
Rev. 0 | Page 10 of 28
11551-009
5
10
11551-005
NUMBER OF AMPLIFIERS
3
Figure 8. Input Offset Voltage Drift Distribution, VSY = ±24 V
100
80
2
TCVOS (μV/°C)
Figure 5. Input Offset Voltage Distribution, VSY = ±24 V
90
1
11551-006
10
Data Sheet
ADA4700-1
TA = 25°C, unless otherwise noted.
500
30
ADA4700-1
VSY = ±5V
ADA4700-1
VSY = ±5V
20
400
–40°C
+25°C
+25°C
300
+85°C
IB (nA)
VOS (µV)
10
+125°C
0
+85°C
200
+125°C
–10
–40°C
100
0
–1
2
1
VCM (V)
–30
–2
11551-010
0
–2
Figure 10. Input Offset Voltage (VOS) vs. Common-Mode Voltage (VCM), VSY = ±5 V
0
–1
Figure 13. Input Bias Current (IB) vs. Common-Mode Voltage (VCM) and
Temperature, VSY = ±5 V
500
30
ADA4700-1
VSY = ±15V
ADA4700-1
VSY = ±15V
20
400
+25°C
–40°C
+85°C
10
300
IB (nA)
VOS (µV)
2
1
VCM (V)
11551-014
–20
–40°C
200
+25°C
0
+85°C
+125°C
–10
+125°C
100
–9
–3
–6
0
6
3
12
9
VCM (V)
–30
–12
11551-013
0
–12
Figure 11. Input Offset Voltage (VOS) vs. Common-Mode Voltage (VCM), VSY = ±15 V
–9
–6
–3
0
3
6
9
12
VCM (V)
11551-012
–20
Figure 14. Input Bias Current (IB) vs. Common-Mode Voltage (VCM) and
Temperature, VSY = ±15 V
40
500
ADA4700-1
VSY = ±50V
20
ADA4700-1
VSY = ±50V
400
0
+85°C
+85°C
300
–20
–40
–40°C
IB (nA)
VOS (µV)
+125°C
200
+125°C
+25°C
100
–60
+25°C
–40°C
–80
–100
0
–120
–100
–30
–20
–10
0
VCM (V)
10
20
30
40
47
–160
–47 –40
Figure 12. Input Offset Voltage (VOS) vs. Common-Mode Voltage (VCM), VSY = ±50 V
–30
–20
–10
0
VCM (V)
10
20
30
40
47
11551-015
–140
11551-011
–200
–47 –40
Figure 15. Input Bias Current (IB) vs. Common-Mode Voltage (VCM) and
Temperature, VSY = ±50 V
Rev. 0 | Page 11 of 28
ADA4700-1
Data Sheet
TA = 25°C, unless otherwise noted.
10
+25°C
+85°C
+125°C
0.1
0.001
0.01
1
0.1
100
10
LOAD CURRENT (mA)
1
+85°C
+125°C
0.1
0.001
0.01
1
0.1
0
OUTPUT
–1
–2
ADA4700-1
VSY = ±50V
AV = +1
LOAD = 20mA
SOURCING
–3
OUTPUT
–5
+125°C
–40°C
1.0
10
15
20
25
30
35
40
SUPPLY VOLTAGE (±V)
45
50
11551-022
0.5
5
–3
–4
OFF
Figure 20. Output Current Transient Settling Time (Sinking), VSY = ±50 V,
Refer to Figure 57 for the Test Circuit
+25°C
0
1
–5
1.5
0
ON
TIME (1µs/DIV)
2.0
+85°C
2
–2
Figure 17. Output Current Transient Settling Time (Sourcing), VSY = ±50 V,
Refer to Figure 56 for the Test Circuit
ADA4700-1
3
–1
–4
TIME (1µs/DIV)
4
0
VCONTROL
1
OUTPUT AMPLITUDE (mV)
2
11551-079
VCONTROL
ADA4700-1
VSY = ±50V
AV = +1
LOAD = 20mA
SINKING
3
OFF
100
Figure 19. Output Voltage (VOL) to Supply Rail vs. Load Current,
VSY = ±5 V to ±50 V
4
ON
10
LOAD CURRENT (mA)
Figure 16. Output Voltage (VOH) to Supply Rail vs. Load Current,
VSY = ±5 V to ±50 V
SUPPLY CURRENT (mA)
+25°C
OUTPUT AMPLITUDE (mV)
1
–40°C
11551-087
–40°C
ADA4700-1
VSY = ±5V TO ±50V
SINKING CURRENT
11551-020
OUTPUT (VOL) TO SUPPLY RAIL (V)
ADA4700-1
VSY = ±5V TO ±50V
SOURCING CURRENT
11551-016
OUTPUT (VOH) TO SUPPLY RAIL (V)
10
Figure 18. Supply Current vs. Supply Voltage
Rev. 0 | Page 12 of 28
Data Sheet
ADA4700-1
TA = 25°C, unless otherwise noted.
3.3
2.9
2.7
UNITY-GAIN BANDWIDTH (MHz)
ADA4700-1
VSY = ±50V
RL = 1MΩ
CL = 200pF
VCM = 0V
VCM = –47V
2.5
VCM = +47V
2.3
–40°C
2.9
+25°C
2.7
+85°C
2.5
+125°C
–10
5
20
35
50
65
80
95
110
125
2.1
0
180
150
135
GAIN
0
ADA4700-1
VSY = ±5V TO ±50V
VCM = 0V
RL = 1MΩ
CL = 35pF
1k
–135
100k
1M
10M
Figure 22. Open-Loop Gain and Phase vs. Frequency,
VSY = ±5 V to ±50 V
50
100
90
ADA4700-1
0
5
10
15
25
Figure 25. Open-Loop Gain vs. Load Current for Various Supply Voltages
115
ADA4700-1
VSY = ±50V
30
RL = 10kΩ
110
GAIN (dB)
AV = +10
10
AV = +1
RL = 2kΩ
105
–10
–30
10
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 23. Closed-Loop Gain vs. Frequency, VSY = ±5 V to ±50 V
100
–40
–25
–10
5
20
35
50
65
TEMPERATURE (°C)
80
95
110
125
11551-031
–20
11551-023
GAIN (dB)
20
LOAD CURRENT (mA)
ADA4700-1
VSY = ±5V TO ±50V
AV = +100
0
200
–90
10k
20
180
95
FREQUENCY (Hz)
40
160
VSY = ±5V
11551-030
–150
100
140
VSY = ±15V
–45
–50
120
105
45
0
100
VSY = ±50V
GAIN (dB)
50
80
110
90
PHASE
60
Figure 24. Unity-Gain Bandwidth vs. Load Capacitance and Temperature,
VSY = ±50 V
PHASE (Degrees)
100
40
LOAD CAPACITIVE (pF)
Figure 21. Unity-Gain Bandwidth vs. Temperature, VSY = ±50 V
200
20
11551-096
–25
TEMPERATURE (°C)
GAIN (dB)
3.1
11551-029
2.1
–40
–100
ADA4700-1
VSY = ±50V
RL = 2kΩ
2.3
11551-025
UNITY-GAIN BANDWIDTH (MHz)
3.1
Figure 26. Open-Loop Gain vs. Temperature for Various Load Resistances,
VSY = ±50 V
Rev. 0 | Page 13 of 28
ADA4700-1
Data Sheet
TA = 25°C, unless otherwise noted.
40
40
ADA4700-1
VSY = ±15V
VIN = ±50mV
AV = +1
30 RL = 10kΩ
CL = 1000pF
OVERSHOOT (%)
CL = 500pF
20
CL = 300pF
10
CL = 1000pF
20
CL = 500pF
CL = 300pF
10
CL = 100pF
–10
5
20
35
50
65
80
95
110
125
TEMPERATURE (°C)
0
–40
60
20
35
50
65
ADA4700-1
VSY = ±5V TO ±50V
VIN = ±50mV
AV = +1
RL = 10kΩ
50
OVERSHOOT (%)
CL = 1000pF
CL = 500pF
CL = 300pF
80
95
110
125
–OS
+OS
40
30
20
10
CL = 100pF
0
–40
–25
–10
5
20
35
10
50
65
80
95
110
TEMPERATURE (°C)
Figure 28. Small Signal Overshoot vs. Temperature for
Various Capacitance Loads, VSY = ±50 V
125
0
11551-047
OVERSHOOT (%)
5
Figure 29. Small Signal Overshoot vs. Temperature for
Various Capacitance Loads, VSY = ±15 V
40
20
–10
TEMPERATURE (°C)
Figure 27. Small Signal Overshoot vs. Temperature for
Various Capacitance Loads, VSY = ±5 V
ADA4700-1
VSY = ±50V
VIN = ±50mV
AV = +1
30 RL = 10kΩ
–25
11551-044
–25
11551-046
0
–40
CL = 100pF
1
10
100
1000
LOAD CAPACITANCE (pF)
10000
100000
11551-045
OVERSHOOT (%)
ADA4700-1
VSY = ±5V
VIN = ±50mV
AV = +1
30 RL = 10kΩ
Figure 30. Small Signal Overshoot vs. Load Capacitance, VSY =±5 V to ±50 V
Rev. 0 | Page 14 of 28
Data Sheet
ADA4700-1
TA = 25°C, unless otherwise noted.
0.1
10
ADA4700-1
VSY = ±5V
VCM = 0V
80kHz LOW-PASS FILTER
THD + NOISE (%)
0.1
0.01
RL = 2kΩ
VIN = 2V p-p
RL = 2kΩ
0.001
VIN = 3V p-p
RL = 10kΩ
ADA4700-1
VSY = ±5V
VCM = 0V
fIN = 1kHz
0.01
0.1
1
10
AMPLITUDE (V p-p)
0.0001
10
100k
Figure 31. Total Harmonic Distortion + Noise (THD + Noise) vs.
Amplitude, VSY = ±5 V
Figure 34. Total Harmonic Distortion + Noise (THD + Noise) vs.
Frequency, VSY = ±5 V
10
0.1
THD + NOISE (%)
THD + NOISE (%)
10k
FREQUENCY (Hz)
ADA4700-1
VSY = ±15V
VCM = 0V
80kHz LOW-PASS FILTER
1
0.1
0.01
RL = 2kΩ
ADA4700-1
VSY = ±15V
VCM = 0V
fIN = 1kHz
0.0001
0.001
0.01
RL = 10kΩ
0.1
1
0.01
VIN = 2V p-p
RL = 2kΩ
0.001
VIN = 10V p-p
RL = 10kΩ
10
100
AMPLITUDE (V p-p)
11551-072
0.001
0.0001
10
0.1
THD + NOISE (%)
1
0.1
0.01
0.01
0.1
1
100k
ADA4700-1
VSY = ±50V
VCM = 0V
80kHz LOW-PASS FILTER
0.001
VIN = 2V p-p
RL = 2kΩ
VIN = 10V p-p
RL = 10kΩ
RL = 10kΩ
10
100
AMPLITUDE (V p-p)
Figure 33. Total Harmonic Distortion + Noise (THD + Noise) vs.
Amplitude, VSY = ±50 V
11551-073
0.0001
0.001
10k
0.01
RL = 2kΩ
ADA4700-1
VSY = ±50V
VCM = 0V
fIN = 1kHz
1k
Figure 35. Total Harmonic Distortion + Noise (THD + Noise) vs.
Frequency, VSY = ±15 V
10
0.001
100
FREQUENCY (Hz)
Figure 32. Total Harmonic Distortion + Noise (THD + Noise) vs.
Amplitude, VSY = ±15 V
THD + NOISE (%)
1k
100
11551-074
RL = 10kΩ
11551-075
0.0001
0.001
0.01
0.0001
10
100
1k
FREQUENCY (Hz)
10k
100k
11551-076
0.001
11551-071
THD + NOISE (%)
1
Figure 36. Total Harmonic Distortion + Noise (THD + Noise) vs. Frequency,
VSY = ±50 V
Rev. 0 | Page 15 of 28
ADA4700-1
Data Sheet
TA = 25°C, unless otherwise noted.
120
140
ADA4700-1
VCM = 0V
120
VCM = (V+) – 3V
80
CMRR (dB)
CMRR (dB)
100
VCM = (V–) + 3V
60
110
VSY = ±50V
100
VSY = ±15V
40
VSY = ±5V
90
ADA4700-1
VSY = ±5V TO ±50V
100
1k
10k
100k
1M
FREQUENCY (Hz)
80
–40
11551-038
0
10
Figure 37. Common-Mode Rejection Ratio (CMRR) vs. Frequency,
VSY = ±5 V to ±50 V
–25
–10
5
20
35
50
65
80
95
110
125
TEMPERATURE (°C)
11551-041
20
Figure 39. Common-Mode Rejection Ratio (CMRR) vs. Temperature for
Various Supply Voltages
140
140
ADA4700-1
VSY = ±4.5V TO ±55V
120
135
60
PSRR (dB)
80
+PSRR
130
40
–PSRR
125
20
ADA4700-1
VSY = ±5V TO ±50V
–20
10
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 38. Power Supply Rejection Ratio (PSRR) vs. Frequency,
VSY = ±5 V to ±50 V
120
–40
–25
–10
5
20
35
50
65
80
95
110
125
TEMPERATURE (°C)
Figure 40. Power Supply Rejection Ratio (PSRR) vs. Temperature
Rev. 0 | Page 16 of 28
11551-037
0
11551-033
PSRR (dB)
100
Data Sheet
ADA4700-1
TA = 25°C, unless otherwise noted.
1000
1000
ADA4700-1
VSY = ±5V
100
ADA4700-1
VSY = ±50V
AV = +100
100
AV = +100
10
1
ZOUT (Ω)
ZOUT (Ω)
10
AV = +10
0.1
AV = +10
1
AV = +1
AV = +1
0.1
0.01
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
0.001
10
11551-032
0.0001
10
10k
100k
1M
10M
Figure 44. Closed-Loop Output Impedance (ZOUT) vs. Frequency,
VSY = ±50 V
10
INPUT VOLTAGE (V)
5
40
20
OUTPUT
ADA4700-1
VSY = ±50V
VIN = 7.5V p-p
AV = –10
2
–20
4
6
8
10
12
14
–5
16
TIME (µs)
20
0
–20
OUTPUT
–40
–60
INPUT
0
20
40
60
80
100
120
140
160
TIME (µs)
180
200
0
0
2
4
6
8
10
ADA4700-1
–40
VSY = ±50V
VIN = 7.5V p-p
AV = –10
–60
12
14
16
TIME (µs)
Figure 45. Negative Output Overload Recovery, VSY = ±50 V
ADA4700-1
VSY = ±50V
AV = +1
40
OUTPUT
–20
Figure 42. Positive Output Overload Recovery, VSY = ±50 V
60
20
–10
11551-061
0
0
OUTPUT VOLTAGE (V)
60
–10
INPUT
0
Figure 43. No Phase Reversal, VSY = ±50 V
Rev. 0 | Page 17 of 28
OUTPUT VOLTAGE (V)
–5
5
11551-064
INPUT
0
11551-069
INPUT VOLTAGE (V)
1k
FREQUENCY (Hz)
Figure 41. Closed-Loop Output Impedance (ZOUT) vs. Frequency,
VSY = ±5 V
OUTPUT (V)
100
11551-035
0.01
0.001
ADA4700-1
Data Sheet
TA = 25°C, unless otherwise noted.
10
100
1
10
100
1k
10k
100k
FREQUENCY (Hz)
1
0.1
100
1k
10k
Figure 48. Input Current Noise Density vs. Frequency
INPUT REFERRED VOLTAGE (200nV/DIV)
ADA4700-1
VSY = ±5V
VCM = 0V
11551-056
INPUT REFERRED VOLTAGE (200nV/DIV)
10
FREQUENCY (Hz)
Figure 46. Input Voltage Noise Density vs. Frequency
TIME (1s/DIV)
1
ADA4700-1
VSY = ±50V
VCM = 0V
TIME (1s/DIV)
Figure 49. 0.1 Hz to 10 Hz Noise, VSY = ±50 V
Figure 47. 0.1 Hz to 10 Hz Noise, VSY = ±5 V
Rev. 0 | Page 18 of 28
11551-059
1
11551-057
10
ADA4700-1
VSY = ±5V TO ±50V
VCM = 0V
11551-058
ADA4700-1
VSY = ±5V TO ±50V
VCM = 0V
CURRENT NOISE DENSITY (pA/√Hz)
VOLTAGE NOISE DENSITY (nV/√Hz)
1k
Data Sheet
ADA4700-1
TA = 25°C, unless otherwise noted.
0.08
60
ADA4700-1
VSY = ±50V
AV = +1
40 V
OUT = ±45V
RL = 2kΩ
CL = 300pF
20
0.06
0.04
VOLTAGE (V)
VOLTAGE (V)
–40°C ≤ TA ≤ +125°C
0.02
0
–0.02
–40°C
+25°C
+85°C
+125°C
0
–20
ADA4700-1
VSY = ±50V
AV = +1
RL = 2kΩ
CL = 300pF
–0.08
0
2
4
6
8
10
12
–40
14
16
18
–60
11551-060
–0.06
20
TIME (µs)
0
+SR
SLEW RATE (V/µs)
16
20
24
28
32
36
40
8
ADA4700-1
VSY = ±5V
AV = –1
RL = 10kΩ
CL = 20pF
6
SETTLING TIME (µs)
–SR
25
12
Figure 53. Large Signal Transient Response, VSY = ±50 V
ADA4700-1
VSY = ±50V
AV = +1
VOUT = ±45V
RL = 2kΩ
CL = 300pF
30
8
TIME (µs)
Figure 50. Small Signal Transient Response, VSY = ±50 V
35
4
11551-063
–0.04
20
15
10
0.01%
4
2
0.1%
–25
–10
5
20
35
50
65
80
95
110
125
TEMPERATURE (°C)
0
11551-062
0
–40
0
6
8
Figure 54. 0.01% and 0.1% Settling Time vs. Step Size, VSY = ±5 V
10
10
ADA4700-1
VSY = ±15V
AV = –1
RL = 10kΩ
CL = 20pF
ADA4700-1
VSY = ±50V
AV = –1
8 RL = 10kΩ
CL = 20pF
0.01%
SETTLING TIME (µs)
8
6
0.1%
4
2
0.01%
6
0.1%
4
0
5
10
15
20
25
STEP SIZE (V)
Figure 52. 0.01% and 0.1% Settling Time vs. Step Size, VSY = ±15 V
0
0
5
10
15
20
25
30
35
STEP SIZE (V)
Figure 55. 0.01% and 0.1% Settling Time vs. Step Size, VSY = ±50 V
Rev. 0 | Page 19 of 28
11551-066
2
11551-068
SETTLING TIME (µs)
4
STEP SIZE (V)
Figure 51. Slew Rate (SR) vs. Temperature, VSY = ±50 V
0
2
11551-065
5
ADA4700-1
Data Sheet
TEST CIRCUITS
+50V
VOUT
750Ω
–50V
11551-082
VCONTROL
–15V
Figure 56. Test Circuit for Output Current Transient Settling Time (Sourcing) Shown in Figure 17
+15V
VCONTROL
+50V
750Ω
11551-098
VOUT
–50V
Figure 57. Test Circuit for Output Current Transient Settling Time (Sinking) Shown in Figure 20
Rev. 0 | Page 20 of 28
Data Sheet
ADA4700-1
THEORY OF OPERATION
V+
Q9
I1
Q10
I2
I3
Q11
Q15
C3
Q17
D5
R1
Q19
D6
I4
Q7
Q1
+IN
D1
Q8
D3
C1
OUT
–IN
Q2
D7
D2
D4
R3
10Ω
D9
R4
10Ω
D10
C2
D5
Q20
D8
Q3
Q5
D6
Q6
Q4
Q18
R2
Q16
C4
Q14
I6
I5
Q13
V–
11551-088
Q12
Figure 58. Simplified Schematic of the ADA4700-1
The ADA4700-1 is a high voltage operational amplifier featuring
a slew enhanced bipolar input stage that provides all of the voltage
gain. Single stage amplifiers are noted for their excellent stability
but poor open-loop gain; however, the advanced ADA4700-1
design provides gain comparable to multistage amplifiers and,
therefore, combines the advantages of both.
Referring to Figure 58, the input stage is formed by Q5 to Q8
loaded by the current mirrors, Q9 to Q14. The output stage is
of the complementary Darlington type formed by Q15 to Q18.
Like other bipolar amplifiers, the input stage is internally clamped
to prevent degradation with large differential inputs; however,
the addition of Q1 and Q2 in conjunction with the high voltage
diodes, D1 and D2, maintain high differential input impedance
even when the voltage between the inputs is equal to the supply
voltage. This configuration makes the ADA4700-1 suitable for
applications with unavoidable large differential voltages, such as
rectifiers, peak detectors, and comparators.
The ADA4700-1 uses a single-pole compensation set by C3 and
C4. The internal snubber networks, R1/C1 and R2/C2, further
enhance the stability. This design enables large capacitive loads
to be driven without the risk of oscillation.
The Q19 and Q20 transistors in conjunction with the R3 and R4
resistors provide output short-circuit protection. Additionally, a
thermal regulating circuit (not shown in Figure 58) limits the
die temperature to 145°C or greater to protect against excessive
power dissipation.
With approximately equal split supplies up to ±50 V, the output can
be shorted to ground unconditionally; however, operating this
way is not recommended.
If the voltage between the output and either supply is more than
60 V, avoid a short circuit to the supply. Transient dissipation in
the output transistors can exceed their safe operating area and
cause subsequent destruction.
THERMAL REGULATION
The circuitry for thermal regulation of the ADA4700-1 is
dependent on the ambient temperature and time duration of
the current drive. When thermal regulation of the ADA4700-1
is active, the supply current, ISY, reduces from 1.7 mA to 300 µA.
The output stage remains biased during thermal regulation due
to the parasitics of the output devices in conjunction with the
elevated die temperature. For example, with a current drive, IOUT,
of 30 mA for 180 seconds and with an ambient temperature of
85°C, the thermal regulation is triggered at a junction temperature
of 145°C with an output current level of 22 mA. For additional
information, refer to the Thermal Management section and the
Safe Operating Area section.
Rev. 0 | Page 21 of 28
ADA4700-1
Data Sheet
APPLICATIONS INFORMATION
THERMAL MANAGEMENT
SAFE OPERATING AREA
Thermal management of high power amplifiers such as the
ADA4700-1 is an essential consideration in system design. Two
conditions affect junction temperature (TJ): power dissipation
(PD) of the device and ambient temperature (TA) surrounding the
package. This relationship is shown in Equation 1.
The safe operating area (SOA) of Figure 59 is the range of voltages,
currents, and temperatures under which an amplifier can safely
operate without failure. It is directly dependent on the ambient
temperature and the thermal resistance. Figure 59 shows the
SOA for the ADA4700-1 at steady state using the PCB shown in
Figure 60. The duration of the 30 mA load driven is 180 seconds.
Different time intervals produce alternate sets of curves. The
guaranteed ambient temperature range of the ADA4700-1 is −40°C
to +85°C. The 125°C shown in Figure 59 is for reference only.
To maintain normal operation, the ADA4700-1 must remain in
the SOA (area under each curve) up to an ambient temperature
of 85°C.
(1)
where θJA is the thermal resistance between the die and the ambient
environment. Power dissipation is the sum of quiescent power of
the device and the power required to drive a load. Power
dissipation for the sourcing current is shown in Equation 2.
(2)
Replace ((V+) − VOUT) in Equation 2 with ((V−) − VOUT) when
sinking current.
35
θJA = 26°C/W
–40°C
+25°C
30
The specified thermal resistance of the ADA4700-1 is 45°C/W.
Printed circuit board (PCB) layout and an external heat sink
can improve thermal performance by reducing θJA.
+85°C
IOUT (mA)
25
To reduce the thermal resistance between the junction and
ambient environment, the exposed pad of the ADA4700-1 can
be soldered to the V− plane layer of the PCB, which acts as a
heat sink. By using the PCB layout shown in Figure 60, θJA
reduces to 26°C/W.
20
15
V+ = +6V TO +100V
–
10
VOUT
101Ω
+
5 +3V
The ADA4700-1 guards the die from exceeding the absolute
maximum temperature. When the die reaches a junction
temperature greater than 145°C, thermal regulation is triggered,
the supply current is reduced, and the output load current is
limited.
4-LAYER FR4 PCB
WITH INTERNAL
GROUND AND
POWER PLANE.
+125°C
V– = –3V
0
1
10
Figure 59. Safe Operating Area with θJA = 26°C/W
12.7mm
(500mil)
a
LANDING VIAS:
b
9.65mm
(380mil)
2
3
EPOXY FILLED
ARRAY: 3 × 4
DIAMETER: a = 0.3048mm (12mil)
PITCH: b = 0.762mm (30mil)
8
1
6.1mm
(240mil)
100
VCC – VOUT (V)
COPPER
TOP/BOTTOM: 1.5oz
INTERNAL LAYERS: 1oz
11551-102
PD = ((V+) − (V−)) × ISY + ((V+) − VOUT) × IOUT
PAD
4
9.65mm
(380mil)
7
6
25.4mm
(1000mil)
5
PADDLE VIAS:
c
Figure 60. Thermal Landing and PCB Material Used to Obtain a θJA of 26°C/W
Rev. 0 | Page 22 of 28
EPOXY FILLED
ARRAY: 10 × 8
DIAMETER: a = 0.3048mm (12mil)
PITCH: c = 1.27mm (50mil)
11551-103
TJ = PD × θJA + TA
Data Sheet
ADA4700-1
DRIVING CAPACITIVE LOADS
10
OUTPUT
VIN
VOUT
0
–2
–4
CL
–6
INPUT
–10
0
2
6
4
8
10
12
14
TIME (µs)
Figure 64. Results from Snubber Network with AV = +1 and CL = 10 pF to 1 nF
15
VSY = ±50V
AV = +10
CL = 10nF
10
5
OUTPUT (V)
For unity-gain applications and capacitive loads up to 1 nF,
RSNUB = 150 Ω and CSNUB = 10 nF works well. Results for this
circuit are shown in Figure 64. With higher closed-loop gains,
lighter snubbing can be used. For capacitive loads up to 10 nF, the
snubber must be larger. Figure 65 shows the results of using an
RSNUB = 22 Ω, CSNUB = 100 nF, and CL = 10 nF with the ADA4700-1
in a gain of 10. Because the snubber network places an ac load on
the amplifier, snubbing does not work well when larger capacitive
loads are used, or when large transients are present. A better
approach is to use a bypass network in the feedback path, as
shown in Figure 62.
22Ω
VSY = ±50V
AV = +1
CL = 10pF TO 1nF
–8
Figure 61. Snubber Network
VIN
2
11551-093
CSNUB
4
11551-084
RSNUB
6
VOLTAGE (V)
Although the ADA4700-1 behaves well when driving capacitive
loads, CL, as seen in Figure 27 to Figure 30, extra compensation
can improve the response when large capacitances need to be
accommodated. The simplest way of accomplishing this is with
a snubber network, as shown in Figure 61.
8
0
–5
VOUT
–10
CFB
3.3kΩ
–15
0
Figure 62. Unity-Gain Configuration with Bypass Network
1.0
1.2
1.4
6
4
VOUT
2
0
–2
–4
–6
3.3kΩ
–8
11551-090
5.1kΩ
0.6
0.8
TIME (ms)
VSY = ±50V
AV = +1
CL = 100nF
8
CL
CFB
43kΩ
10
OUTPUT (V)
22Ω
0.4
Figure 65. Results from Snubber Network with Higher Gains, CL = 10 nF
The bypass network in Figure 62 performs well with loads up to
100 nF. The resulting waveforms are shown in Figure 66 for various
output amplitudes. For heavier loads, capacitive feedback, CFB, must
be increased. The configuration in Figure 62 can be modified to
work with gains greater than 1. Figure 63 shows a bypass network
with a gain of 10 system, and results for various output amplitudes
are shown in Figure 67.
VIN
0.2
Figure 63. Bypass Network with Gain of 10 System
–10
0
0.2
0.4
0.6
0.8
TIME (ms)
1.0
1.2
11551-100
10nF
11551-099
11551-089
CL
Figure 66. Results of Bypass Network for Various Output Amplitudes,
Unity Gain with CL = 100 nF
Rev. 0 | Page 23 of 28
ADA4700-1
Data Sheet
CONSTANT CURRENT APPLICATIONS
50
VSY = ±50V
AV = +10
CL = 100nF
40
When a constant current with high compliance is needed, the
ADA4700-1 can be used as a modified Howland current pump.
The values shown in Figure 70 yield a transfer function of 1 mA/V.
Applying this analysis to the modified Howland current pump
in Figure 71 results in an output capability of 1 A/V.
30
OUTPUT (V)
20
10
0
R2
50kΩ
–10
IF R2 = R4 + RSET
AND R1 = R3
R1
100kΩ
–20
+VIN
IOUT =
–30
R2
R1
RSET
500Ω
0.5
1.0
1.5
TIME (ms)
2.0
R3
100kΩ
IOUT
R4
49.5kΩ
11551-086
0
11551-101
–40
–50
–VIN
RSET
Figure 67. Result of Bypass Network with AV = +10 and CL = 100 nF
Figure 70. Transfer Function of 1 mA/V
INCREASING CURRENT DRIVE
Extra output current can be obtained by adding external driver
transistors. Crossover distortion is minimized by allowing the
amplifier to drive the lower currents directly via the bypass
resistor, as is shown in Figure 68. This circuit can provide a few
hundred miliamps; however, keep the driver transistors within
their safe operating area. For heavier loads (up to 5 A), power
Darlingtons can be used, as is shown in Figure 69.
+V
BDW93C
10kΩ
VIN
20kΩ
270Ω
0.5Ω
IOUT
+V
2N5550
180Ω
10kΩ
IOUT
20kΩ
2N5401
Figure 71. Modified Howland Current Pump
11551-085
+V
Figure 68. Increasing Current Drive Using Discrete Transistors
+V
BDW93C
VIN
270Ω
BDW94C
IOUT
–V
11551-091
BDW94C
Figure 69. Bilateral Current Source with Transfer Function 1 mA/V
Rev. 0 | Page 24 of 28
–V
11551-092
VIN
Data Sheet
ADA4700-1
OUTLINE DIMENSIONS
5.00
4.90
4.80
3.098
0.356
5
1
4
6.20
6.00
5.80
4.00
3.90
3.80
2.41
0.457
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
BOTTOM VIEW
1.27 BSC
3.81 REF
TOP VIEW
1.65
1.25
1.75
1.35
SEATING
PLANE
0.51
0.31
0.50
0.25
0.10 MAX
0.05 NOM
COPLANARITY
0.10
8°
0°
45°
0.25
0.17
1.04 REF
1.27
0.40
COMPLIANT TO JEDEC STANDARDS MS-012-A A
06-03-2011-B
8
Figure 72. 8-Lead Standard Small Outline Package with Exposed Pad [SOIC_N_EP]
Narrow Body
(RD-8-2)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADA4700-1ARDZ
ADA4700-1ARDZ-R7
ADA4700-1ARDZ-RL
1
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
Package Description
8-Lead Standard Small Outline Package with Exposed Pad [SOIC_N_EP]
8-Lead Standard Small Outline Package with Exposed Pad [SOIC_N_EP]
8-Lead Standard Small Outline Package with Exposed Pad [SOIC_N_EP]
Z = RoHS Compliant Part.
Rev. 0 | Page 25 of 28
Package Option
RD-8-2
RD-8-2
RD-8-2
ADA4700-1
Data Sheet
NOTES
Rev. 0 | Page 26 of 28
Data Sheet
ADA4700-1
NOTES
Rev. 0 | Page 27 of 28
ADA4700-1
Data Sheet
NOTES
©2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D11551-0-8/13(0)
Rev. 0 | Page 28 of 28