CSM_PhotoMicro_OP_E_12_3 Accessories (Order Separately) Ordering Information Connectors and Connector Hold-down Clips Applicable Sensor models EE-SX67@ (A, P, R), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 Type Cable length Model Remarks EE-1001 Connector EE-1001-1 L terminal and positive (+) terminal are already short-circuited. EE-1009 *1 EE-1006 1M 1m EE-1010 1M *1 EE-1006 2M 4 conductors Connector with Cable EE-1006D 3 conductors 2m EE-1006L 2 conductors EE-1010 2M *1 1m EE-1010-R 1M *1 Connector with Robot Cable 2m EE-1010-R 2M*1 NPN/PNP Conversion 0.46 m EE-2002 Connector (total length) Connector Hold-down Clip EE-1006A For EE-1006, EE-SX670@, 470, EE-SY671, and 672 only. Case (housing) EE-1006H 100 per carton Dispersion Pins EE-1006C 500 per carton Connector Parts *2 Appearance Special Crimping Tool EE-1006T Switching knob Crimping section Ratchet Handle *1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled. *2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special Crimping Tool to prepare the Connector. Applicable Sensor models EE-SX95@-C1J-R Item Cable length Model Connector with Robot Cable 2 m EE-1016-R 2M Applicable Sensor models EE-SX97@-C1, [email protected] Item Cable length 1m Connector with Cable 3m 1m Connector with Robot Cable 3m Applicable Sensor models EE-SPX74@/84@ Item Connector with Cable Connector Remarks Model EE-1017 1M EE-1017 3M EE-1017-R 1M EE-1017-R 3M Remarks Cable length Model 1m EE-1013 1M Remarks Applicable Sensor models EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301-A/401-A Item Cable length Model Connector EE-1002 Connector with Cable 1 m EE-1003 NPN/PNP Conversion 0.46 m EE-2001 Connector (total length) Connector Hold-down Clip EE-1003A Sensor Remarks For EE-1003 only. 1 Ratings and Specifications Product Connector *1 *4 Model EE-1009 Connector with Connector with Cable *1 Robot Cable *1 EE-1010 EE-1010-R Connector (short-circuited Connector with between posiCable tive (+) and L terminals) *2 *4 EE-1001-1 EE-1006 Connector *4 EE-1001 Appearance Item Contact resistance Insertion/removal durability *3 Insertion strength Surplus strength (housing holding strength) Standard cable length Lock strength *3 Ambient humidity Housing Material Contact Applicable Photomicrosensors Product Model 20 mΩ max. (at 20 mV max., 100 mA max.) 15 mΩ max. (at 100 VDC max.) 50 times min. 10 mΩ max. (100 VDC max.) --- No. of poles ✕ 6 N max. 50 N max. No. of poles ✕ 0.4 N max. --- 20 N max. --1 m, 2 m --1 m, 2 m No. of poles ✕ 29 N min. --−10 to +60°C −10 to +75°C −10 to 60°C Polybutylene phthalate (PBT) Phosphor bronze EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 Connector *4 EE-1002 Connector with Connector with Connector with Connector with Connector with Cable Cable Robot Cable Cable Robot Cable EE-1003 EE-1013 EE-1016-R EE-1017 EE-1017-R Appearance Item 10 mΩ max. 20 mΩ max. (at 10 mADC (at minute current of 1 kHz and and 1 ADC) 500 VDC) Insertion strength 20 N max. 23.5 N max. 40 N max. 15 N min. (initial) Surplus strength 10 N min. 3.5 N min. 10 N min. (housing holding strength) (ten times) Cable length --1m Ambient humidity −10 to +75°C −10 to +60°C −10 to +55°C Housing Nylon Material Contact Phosphor bronze EE-SPX301/401, Applicable EEEE-SPY30@/40@, SPX74@/84@ Photomicrosensors EE-SPZ301-A/401-A Contact resistance 25 mΩ max. (at 10 mA DC and 20 mV max.) 20 N max. 15 N min. 1.5 N min. 2m −25 to +85°C 1 m, 3 m −10 to +60°C EESX95@-C1J-R [email protected], [email protected] *1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor, grip the top and bottom of the Connector housing, as shown in the following diagram, and then pull out the Connector. *2. EE-SX67@ and EE-SY67@ are the best used in the light-ON state. *3. The insertion/removal durability and lock strength apply only to the lock mechanism. They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock mechanisms. *4. Do not store the type EE-1009, EE-1001, EE-1001-1 and EE-1002 under the following conditions since their terminals may discolor. (1)In the place exposed to the direct sunlight, the high temperature or high humidity. Sensor Connector 2 (Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Photomicrosensor Connectors and Connector Hold-down Clips Dimensions Connector EE-1001 13 2.54±0.15 4 0.6 Terminal Arrangement (1) (2) (3) (4) 10.8 6 L OUT (1) (2) (3) (4) 2.9±1 Connector (short-circuited between positive (+) and L terminals) 13 EE-1001-1 4 0.6 5 1.4 Terminal Arrangement (1) (2) (3) (4) L OUT 2.5 10.8 3±0.3 6 (1) (2) (3) (4) 2.54 0.8 2.8±0.1 1.5 3.9±0.4 7.62 Connector with Cable EE-1006 2M (EE-1006 1M) 5.5±0.4 Connector Hold-down Clip EE-1006A 11.8 2.54 (Can be used only with EE-1006 Connectors for the Photomicrosensors listed below.) 5.3 0.6 (4)(3)(2)(1) 16.2 R3 25.2 19 20 12 3.2 3.6 4-R1.6 3.4 2,000 (1,000) Cable: 4-dia. 4-conductor vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm). 5.5 3 3 2.1 10.2 21.9 19.4 Terminal Arrangement 15 1.2 40 (1) (2) (3) (4) L OUT Brown Pink Black Blue (R1) Material: Stainless steel Applicable Photomicrosensors EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 2 For EE-SX670@, 470@, EE-SY671, and 672 only. 3 Photomicrosensor Connectors Connectors EE-1009 13 2-C1 4 5 0.6 Terminal Arrangement 1.4 2.5 9 (1) (2) (3) (4) 4.5 L OUT (1) (2) (3) (4) 1.2 0.8 2.5 2.54 1.5 7.62 Connector with Cable EE-1010 2M (EE-1010 1M) Connector with Robot Cable EE-1010-R 2M (EE-1010-R 1M) 13.5 2-C1 13 7.62 (1) (2) (3) (4) 2.54 20±5 2,000 (1,000) 15±5 25±5 5 0.6 1.4 2.5 4 EE-1010 cable EE-1010-R cable: 4-dia. 4-conductor vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm). Terminal Arrangement (1) (2) (3) (4) L OUT Brown Pink Black Blue Applicable EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@ Photomicrosensors EE-SPX303N/403N, EE-SPW311/411 Connector with Robot Cable EE-1016-R 8 5.8 10 2 10 2,000 (1) (2) (3) (4) 16 7 Terminal Arrangement Robot cable of 2.8 dia., 4 cores, (0.15 mm2 with 0.8-mm dia.insulator); Standard length: 2 m (1) (2) (3) (4) OUT2 OUT1 Brown White Blue Black Applicable EE-SX95@-C1J-R Photomicrosensors 4 Photomicrosensor Connectors and Connector Hold-down Clips Connector EE-1002 Connector with Cable EE-1003 0.75 2.5 16.62 6 3 6 Connector Hold-down Clips (For EE-1003 only) EE-1003A 11 5 1.75 4.9 20 5.7 10.7 4.2 14.2 1 22 Two, 3.2 dia. hole 1 25.5 3.5 2.9 1 8 16.5 11 1 OUT 2 6 5.5 1,000±20 3±1 1.2 0.6 0.25 2.5 2 5 1.2 (3) (2) (1) Blue Black Brown 5 2.5 11.5 4 Cable: 1.61-dia. 1-conductor vinyl-insulated round cable (Conductor cross section: 0.33 mm2). 13.5 Applicable Photomicrosensors 1.25 1.8 EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301-A/401-A Connector with Cable EE-1013 5.7 2.9-dia. 3-conductor vinyl-insulated round cable (Conductor cross section: 0.15 mm2, Insulator diameter: 0.9 mm), Standard length: 1 m. XHP-3 (JST Mfg.) (3) 2.5 9.8 (2) Terminal Arrangement (1) 7.75 Applicable Photomicrosensors 20 1,000 16±2 7±1 (1) (2) (3) Blue GND(0V) Black OUTPUT Brown Vcc EE-SPX74@/84@ Connector with Cable EE-1017 Connector with Robot Cable EE-1017-R 5.8 2 10 8 20±5 (4) (3) (2) (1) Connector with Robot Cable: EE-1017-R Robot instrumentation cord: 4 dia., 4 cores, (Cross section area of conductor: 0.2 mm2/ insulator: 1.1 mm dia.) Applicable Photomicrosensors +50 0 1,000 25±5 Connector with Cable: EE-1017 Vinyl insulated round cord: 4 dia., 4 cores, (Cross section area of conductor: 0.2 mm2/ insulator: 1.1 mm dia.) (8) 15±5 Terminal Arrangement (1) (2) (3) (4) 1 2 Brown Black White Blue EE-SX97@-C1, [email protected] 5 NPN to PNP Transistor Output Conversion Connectors NPN/PNP Conversion Connector EE-2001 NPN/PNP Conversion Connector EE-2002 * Terminal Arrangement Terminal Arrangement (1) (2) (3) OUT Brown Black Blue (1) (2) (3) OUT Brown Black Blue *The EE-SX67@ and EESY67@ do not support LightON mode. 8 10.7 20 200 40 16.2 200 8 dia. 12 12.5 Connector side (sensor side) 4.9 20 200 40 200 8 dia. 12 11.8 5.3 Connector side (sensor side) Cable: 4-dia, 3-conductors vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulation diameter: 1.2 mm). Cable: 4-dia, 3-conductors vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulation diameter: 1.2 mm). Cable end (end with power output) Cable end (end with power output) Applicable EE-SPX301/401, EE-SPY30@/40@, Photomicrosensors EE-SPZ301-A/401-A EE-SX67@[email protected] (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 6 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2016.4 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2016 All Right Reserved.