Download

Standard Proximity Sensor
E2E
CSM_E2E_DS_E_11_4
Your Search for Proximity Sensors
Starts with the World-leading
Performance and Quality of the E2E
(Standards do not apply to all models.)
• Standard Sensors for detecting ferrous metals.
• Wide array of variations. Ideal for a variety of applications.
• Models with different frequencies are also available to prevent
mutual interference.
• Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists
cutting oil.
• Useful to help prevent disconnection.
Cable protector provided as a standard feature.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Be sure to read Safety Precautions on
page 25.
Features
2-Wire Models
Pre-wired Models with Oil-resistant Reinforced PUR Cables Added
to the Lineup and Easy Differentiation with Orange Head
Oilil Resistance
Differentiation from standard
models: Orange Head
Oil Resistance (Insulation service life):
twice or three times
that of oil-resistant vinyl chloride
able Flexibility
Cable
Cable Flexibility:
approximately twice
that of vinyl chloride cables
Cable
able Flexibility at
Low Temperatures
More Flexibility at −40°C
Lineup includes models with Smartclick pre-wired connectors for fast connection.
XS5 Smartclick connectors used to
enable checking connector mating
Jacket: Polyester elastomer
Clic
Insert all
the way.
k
1/8 turn
Insulation: Oil-resistant grade PUR (polyurethane)
UL-recognized Models Available
1
E2E
Lineup includes models with self-diagnostic output to provide notification of failures and
unstable detection conditions, such as coil burnout.
• Contributes to preventive maintenance to keep the line from stopping.
Reduced wiring, fewer resources, and low power consumption contribute to
environmentalism.
• Wiring work and amount of copper wire used reduced to two thirds of that required for 3-wire models.
• Current consumption drastically reduced to less than 10% (when a DC 2-wire model is compared with a DC 3-wire model).
3-Wire Models
Wide range of ambient operating temperatures: −40°C to 85°C (M8 to M30 models)
• Suitable for low-temperature and high-temperature applications, which are troublesome for photoelectric sensors.
Lineup includes models with flexible cable (M8 to M30 models)
• Reduced risk of disconnection in applications with moving parts.
2
E2E
E2E Guide to Selection by Purpose
Environment
−40 to 85°C
AC 2-wire: M12 to M30,
DC 3-wire: M8 to M30
Wide operating
temperature range
−25 to 70°C
Models not listed above.
Resists the influence of surrounding metal
Maintenance
Reducing stocked
models
NPN/PNP output
AC/DC
Shielded Models
DC 2-Wire Models
[email protected]@
AC/DC 2-Wire Models
[email protected]
Smartclick Pre-wired
Connector Models
[email protected]@-M1TGJ-(U)/(US)
Easy replacement
Pre-wired Connector
Models
[email protected](G)J-(T)
Connector Models
[email protected]@-M1(G)
[email protected]@-M1
[email protected]@-M1
Reducing troubles
Higher oil resistance
Reinforced
Standard
Mounting to moving
parts
Models with Oil-resistant PVC
cable
Robotics Cable Models
[email protected]
[email protected]
Robotics cable
Mutual interference
prevention
Miswiring measures
Models with Oil-resistor
reinforced PUR cable
[email protected]@-U
Models with a Different
Frequency (NO Models
only)
E2E-X@@15
Load short-circuit
protection
DC 2-Wire Models
[email protected]@
DC 3-Wire Models
[email protected]@
No polarity
DC 2-Wire
No-polarity Models
[email protected]
Early discovery
of problems
Diagnostic Models
[email protected]
Note: Refer to Models Not Listed in this Catalog for Long Body Models, Transmission Couplers, and Power Couplers.
3
E2E
E2E Model Number Legend
E2E- A B C D E F G - H I - J - K - L
No.
A
Classification
Appearance
B
Sensing distance
C
Shielding
D
Power supply and output
specifications
E
Form of output switching element
F
Oscillation frequency type
G
Self-diagnosis
Code
X
Number
R
Blank
M
B
C
D
E
F
T
Y
1
2
Blank
5
Blank
5
Blank
H
Connection method
Connector specifications
M3
M8-size metal connector
J
GJ
TJ
TGJ
J
DC 2-wire polarity
K
Cable specifications
New model
Blank
T
Blank
R
U
Standard-certified model
M
Cable length
Example:
1R5: 1.5 mm
Whether D models have
polarity is defined by number J.
Used to prevent mutual interference.
Connector Model
DC 3-wire and AC 2-wire, DC 2-wire with self-diagnosis output,
DC 2-wire with old pin arrangement
Connector Model
DC 2-wire with IEC pin arrangement
Pre-wired Connector Model
DC 3-wire and AC 2-wire, DC 2-wire with old pin arrangement
Pre-wired Connector Model
DC 2-wire with IEC pin arrangement
Pre-wired Smartclick Connector Model
DC 2-wire
Pre-wired Smartclick Connector Model
DC 2-wire with IEC pin arrangement
Polarity
No polarity
Standard PVC cable (oil resistant)
Flexible PVC cable (oil resistant)
Polyurethane cable (oil resistant and reinforced)
N
New model (Applies only to DC 2-wire pre-wired and shielded
models.)
US
UL-recognized model (Applies to DC 2-wire pre-wired models
and pre-wired connector models.)
Letter M
Cable length (Unit: m) (Applicable to Pre-wired Models and Prewired Connector Models.)
L
Remarks
Pre-wired
M12-size metal connector
G
I
Cylindrical (threaded)
Sensing distance (Unit: mm)
Indication of decimal point
Shielded Model
Unshielded Model
DC 3-wire PNP open-collector output
DC 3-wire NPN open-collector output
DC 2-wire polarity/no polarity
DC 3-wire NPN collector load built-in output
DC 3-wire PNP collector load built-in output
AC/DC 2-wire
AC 2-wire
Normally open (NO)
Normally closed (NC)
Standard frequency
Different frequency
No
Yes
M1
Blank
M
Meaning
This is blank if the cable
specification in number K
is R or U.
Example:
2M
0.3M
Note: The purpose of this model number legend is to provide understanding of the meaning of specifications from the model number.
Models are not available for all combinations of code numbers.
4
E2E
Ordering Information
2-Wire Models
Shielded DC 2-wire Models with No Self-diagnostic Output [Refer to Dimensions on page 27.]
Appearance
Sensing distance
Connection
method
Cable
specifications
Polarity
M12 Pre-wired Smart- PUR (increased
click Connector Mod- oil-resistant)
els (0.3m)
PVC (oil-resistant)
M8
2 mm
Pre-wired Models
(2 m)
PUR (increased
oil-resistant)
PVC (oil-resistant)
M12 Connector Models
M8 Connector Models
Yes
---
M12 Pre-wired Smart- PUR (increased
click Connector Mod- oil-resistant)
els (0.3m)
PVC (oil-resistant)
Pre-wired Models
(2 m)
M12
Yes
M12 Connector Models
Yes
No *3
M12 Pre-wired Smart- PUR (increased
click Connector Mod- oil-resistant)
els (0.3m)
PVC (oil-resistant)
Pre-wired Models
(2 m)
M18
PUR (increased
oil-resistant)
Yes
M12 Connector Models
Yes
No *3
M12 Pre-wired Smart- PUR (increased
click Connector Mod- oil-resistant)
els (0.3m)
PVC (oil-resistant)
Pre-wired Models
(2 m)
M30
PUR (increased
oil-resistant)
Yes
M12 Connector Models
M12 Standard Prewired Connector Mod- PVC (oil-resistant)
els (0.3 m)
Yes
No *3
E2E-X2D1-M1TGJ-U 0.3M
E2E-X2D2-M1TGJ-U 0.3M
E2E-X2D1-M1TGJ 0.3M
E2E-X2D1-U 2M
NC
E2E-X2D2-U 2M
NO
---
---
E2E-X2D1-N 2M
E2E-X2D2-N 2M
NO
1: +V, 4: 0 V
A
D
NC
1: +V, 2: 0 V
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
1: +V, 4: 0 V
I
H
G
E2E-X2D1-M1G
E2E-X2D2-M1G
E2E-X2D1-M3G
E2E-X2D2-M3G
E2E-X3D1-M1TGJ-U 0.3M
E2E-X3D2-M1TGJ-U 0.3M
E2E-X3D1-M1TGJ 0.3M
NO
E2E-X3D1-U 2M
NC
E2E-X3D2-U 2M
---
---
E2E-X3D1-N 2M *1
E2E-X3D2-N 2M
NO
1: +V, 4: 0 V
A
E2E-X3D1-M1G *1
NC
1: +V, 2: 0 V
D
E2E-X3D2-M1G
NO
1: +V, 4: 0 V
A
E2E-X3D1-M1GJ 0.3M
NC
1: +V, 2: 0 V
D
E2E-X3D2-M1GJ 0.3M
NO
(3, 4): (+V, 0 V)
C
E2E-X3D1-M1J-T 0.3M
NC
(1, 2): (+V, 0 V)
D
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
1: +V, 4: 0 V
H
G
--E2E-X7D1-M1TGJ-U 0.3M
E2E-X7D2-M1TGJ-U 0.3M
E2E-X7D1-M1TGJ 0.3M
NO
E2E-X7D1-U 2M
NC
E2E-X7D2-U 2M
---
---
E2E-X7D1-N 2M *1
E2E-X7D2-N 2M
NO
1: +V, 4: 0 V
A
E2E-X7D1-M1G *1
NC
1: +V, 2: 0 V
D
E2E-X7D2-M1G
NO
1: +V, 4: 0 V
A
E2E-X7D1-M1GJ 0.3M
NC
1: +V, 2: 0 V
D
E2E-X7D2-M1GJ 0.3M
NO
(3, 4): (+V, 0 V)
C
E2E-X7D1-M1J-T 0.3M
NC
(1, 2): (+V, 0 V)
D
E2E-X7D2-M1J-T 0.3M
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
1: +V, 4: 0 V
H
G
E2E-X10D1-M1TGJ-U 0.3M
E2E-X10D2-M1TGJ-U 0.3M
E2E-X10D1-M1TGJ 0.3M
NO
E2E-X10D1-U 2M
NC
E2E-X10D2-U 2M
---
---
NC
---
Model
NO
NO
PVC (oil-resistant)
10 mm
G
NC
---
M12 Standard Prewired Connector Mod- PVC (oil-resistant)
els (0.3 m)
1: +V, 4: 0 V
NO
PVC (oil-resistant)
7 mm
NO
H
NC
---
M12 Standard Prewired Connector Mod- PVC (oil-resistant)
els (0.3 m)
1: +V, 2: 0 V
NO
PVC (oil-resistant)
3 mm
NC
Applicable
connector
code *2
NC
---
PUR (increased
oil-resistant)
OperaPin
tion
arrangement
mode
NO
1: +V, 4: 0 V
E2E-X10D1-N 2M *1
E2E-X10D2-N 2M
NO
1: +V, 4: 0 V
A
E2E-X10D1-M1G *1
NC
1: +V, 2: 0 V
D
E2E-X10D2-M1G
NO
1: +V, 4: 0 V
A
E2E-X10D1-M1GJ 0.3M
NC
1: +V, 2: 0 V
D
E2E-X10D2-M1GJ 0.3M
NO
(3, 4): (+V, 0 V)
C
E2E-X10D1-M1J-T 0.3M
NC
(1, 2): (+V, 0 V)
D
E2E-X10D2-M1J-T 0.3M
*1. Models with different frequencies are also available. The model number is E2E-X @D15 (example: E2E-X3D15-N 2M).
*2. Refer to page 22 for details.
*3. The residual voltage for models without polarity is 5 V, so use caution concerning the connection load interface conditions (e.g., PLC ON voltage).
Refer to page 26
5
E2E
2-Wire Models
Shielded DC 2-Wire UL-recognized Models with No Self-diagnostic Output [Refer to Dimensions on page 27.]
Appearance
M8
Sensing distance
2 mm
Connection
method
Cable
specifications
Polarity
M12 Pre-wired Smartclick Connector Models
(0.3 m)
3 mm
M18
7 mm
Pre-wired Models (2 m)
M30
10 mm
M12 Pre-wired Smartclick Connector Models
(0.3 m)
Pre-wired Models (2 m)
1: +V, 2: 0 V
PVC (oil-resistant)
Yes
---
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
Pre-wired Models (2 m)
M12 Pre-wired Smartclick Connector Models
(0.3 m)
1: +V, 4: 0 V
NC
NC
M12 Pre-wired Smartclick Connector Models
(0.3 m)
Pin
arrangement
NO
NO
Pre-wired Models (2 m)
M12
Operation
mode
NC
---
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
NC
---
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
NC
---
Applicable
connector
code *
Model
E2E-X2D1-M1TGJ-US 0.3M
G
---
E2E-X2D2-M1TGJ-US 0.3M
E2E-X2D1-US 2M
E2E-X2D2-US 2M
E2E-X3D1-M1TGJ-US 0.3M
G
---
E2E-X3D2-M1TGJ-US 0.3M
E2E-X3D1-US 2M
E2E-X3D2-US 2M
E2E-X7D1-M1TGJ-US 0.3M
G
---
E2E-X7D2-M1TGJ-US 0.3M
E2E-X7D1-US 2M
E2E-X7D2-US 2M
E2E-X10D1-M1TGJ-US 0.3M
G
---
E2E-X10D2-M1TGJ-US 0.3M
E2E-X10D1-US 2M
E2E-X10D2-US 2M
* Refer to page 22 for details.
6
E2E
2-Wire Models
Unshielded DC 2-Wire Models with No Self-diagnosis Output [Refer to Dimensions on page 27.]
Appearance
Sensing distance
Connection
method
Cable
specifications
Polar- Operation
ity
mode
NO
Pre-wired Models (2 m) PVC (oil-resistant)
M8
M12 Connector Models
4 mm
NC
---
M8 Connector Models
---
M12 Pre-wired Smartclick Connector Models
(0.3m)
PVC (oil-resistant)
M12
M12 Connector Models
---
M12 Standard Prewired Connector Models (0.3 m)
PVC (oil-resistant)
M12 Pre-wired Smartclick Connector Models
(0.3m)
PVC (oil-resistant)
Pre-wired Models (2 m) PVC (oil-resistant)
M18
14 mm
M12 Connector Models
---
M12 Standard Prewired Connector Models (0.3 m)
PVC (oil-resistant)
M12 Pre-wired Smartclick Connector Models
(0.3m)
PVC (oil-resistant)
Pre-wired Models (2 m) PVC (oil-resistant)
M30
20 mm
M12 Connector Models
M12 Standard Prewired Connector Models (0.3 m)
--PVC (oil-resistant)
Yes
---
---
1: +V, 4: 0 V
A
NC
1: +V, 2: 0 V
D
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
1: +V, 4: 0 V
NC
8 mm
Applicable
connector
code *2
NO
NO
Pre-wired Models (2 m) PVC (oil-resistant)
Pin
arrangement
---
I
G
---
Model
E2E-X4MD1 2M
E2E-X4MD2 2M
E2E-X4MD1-M1G
E2E-X4MD2-M1G
E2E-X4MD1-M3G
E2E-X4MD2-M3G
E2E-X8MD1-M1TGJ 0.3M
E2E-X8MD1 2M *1
E2E-X8MD2 2M
NO
1: +V, 4: 0 V
A
E2E-X8MD1-M1G *1
NC
1: +V, 2: 0 V
D
E2E-X8MD2-M1G
NO
1: +V, 4: 0 V
A
E2E-X8MD1-M1GJ 0.3M
NC
1: +V, 2: 0 V
D
---
NO
1: +V, 4: 0 V
G
E2E-X14MD1-M1TGJ 0.3M
NO
NC
---
---
E2E-X14MD1 2M *1
E2E-X14MD2 2M
NO
1: +V, 4: 0 V
A
E2E-X14MD1-M1G *1
NC
1: +V, 2: 0 V
D
E2E-X14MD2-M1G
NO
1: +V, 4: 0 V
A
E2E-X14MD1-M1GJ 0.3M
NC
1: +V, 2: 0 V
D
E2E-X14MD2-M1GJ 0.3M
NO
1: +V, 4: 0 V
G
E2E-X20MD1-M1TGJ 0.3M
NO
NC
---
---
E2E-X20MD1 2M *1
E2E-X20MD2 2M
NO
1: +V, 4: 0 V
A
E2E-X20MD1-M1G *1
NC
1: +V, 2: 0 V
D
E2E-X20MD2-M1G
NO
1: +V, 4: 0 V
A
E2E-X20MD1-M1GJ 0.3M
NC
1: +V, 2: 0 V
D
---
*1. Models with different frequencies are also available. The model number is E2E-X @D15 (example: E2E-X8MD15 2M).
*2. Refer to page 22 for details.
7
E2E
2-Wire Models
Unshielded DC 2-Wire UL-recognized Models with No Self-diagnostic Output [Refer to Dimensions on page 27.]
Appearance
M8
Sensing distance
Connection
method
Cable
specifications
Polarity
Operation
mode
M12 Pre-wired Smartclick Connector Models
(0.3 m)
4 mm
M12
14 mm
M18
PVC (oil-resistant)
20 mm
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NC
---
NO
1: +V, 4: 0 V
NC
1: +V, 2: 0 V
NO
Pre-wired Models (2 m)
---
NO
NO
M12 Pre-wired Smartclick Connector Models
(0.3 m)
---
NO
NC
Yes
Pre-wired Models (2 m)
M30
1: +V, 2: 0 V
NO
Pre-wired Models (2 m)
M12 Pre-wired Smartclick Connector Models
(0.3 m)
1: +V, 4: 0 V
NC
NC
M12 Pre-wired Smartclick Connector Models
(0.3 m)
8 mm
NO
NO
Pre-wired Models (2 m)
Pin
arrangement
NC
---
Applicable
connector
code *
Model
E2E-X4MD1-M1TGJ-US 0.3M
G
---
E2E-X4MD2-M1TGJ-US 0.3M
E2E-X4MD1-US 2M
E2E-X4MD2-US 2M
E2E-X8MD1-M1TGJ-US 0.3M
G
---
E2E-X8MD2-M1TGJ-US 0.3M
E2E-X8MD1-US 2M
E2E-X8MD2-US 2M
E2E-X14MD1-M1TGJ-US 0.3M
G
---
E2E-X14MD2-M1TGJ-US 0.3M
E2E-X14MD1-US 2M
E2E-X14MD2-US 2M
E2E-X20MD1-M1TGJ-US 0.3M
G
---
E2E-X20MD2-M1TGJ-US 0.3M
E2E-X20MD1-US 2M
E2E-X20MD2-US 2M
* Refer to page 22 for details.
Shielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 27.]
Appearance
M12
Sensing distance
3 mm
7 mm
10 mm
Model
PVC (oil-resistant)
---
---
E2E-X3D1S 2M *1
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
D
E2E-X3D1S-M1
Pre-wired Models
(2 m)
M12 Connector
Models
M12 Connector
Models
Pre-wired Models
(2 m)
M30
Applicable
connector
code *2
Cable
specifications
Pre-wired Models
(2 m)
M18
Pin
arrangement
Connection
method
M12 Connector
Models
Polarity
Operation
mode
PVC (oil-resistant)
---
---
E2E-X7D1S 2M *1
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
D
E2E-X7D1S-M1
PVC (oil-resistant)
---
---
E2E-X10D1S 2M *1
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
D
E2E-X10D1S-M1
Yes
NO
*1. Models with different frequencies are also available. The model number is E2E-X @D15S (example: E2E-X3D15S 2M).
*2. Refer to page 22 for details.
8
E2E
2-Wire Models
Unshielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 27.]
Appearance
Sensing distance
8 mm
M12
14 mm
M18
20 mm
M30
Pin
arrangement
Applicable
connector
code *2
Model
PVC (oil-resistant)
---
---
E2E-X8MD1S 2M *1
M12 Connector
Models
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
D
E2E-X8MD1S-M1
Pre-wired Models (2 m)
PVC (oil-resistant)
---
---
E2E-X14MD1S 2M *1
2: +V and diagnostic output
3: 0 V
4: +V and control output
D
E2E-X14MD1S-M1
Connection
method
Cable
specifications
Pre-wired Models (2 m)
Polarity
Yes
Operation
mode
NO
M12 Connector
Models
---
Pre-wired Models (2 m)
PVC (oil-resistant)
---
---
E2E-X20MD1S 2M *1
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
D
E2E-X20MD1S-M1
M12 Connector
Models
*1. Models with different frequencies are also available. The model number is E2E-X @MD15S (example: E2E-X8MD15S 2M).
*2. Refer to page 22 for details.
Connector Pin Assignments of DC 2-Wire Models
• The connector pin assignments of each New E2E DC 2-Wire Model
conform to IEC 947-5-2 Table III. (Only DC 2-Wire Models have
been changed in comparison to the previous models.)
• The following models with conventional connector pin assignments
are available as well. (Only NO Models can be used.)
The cable at the right should also be used if the [email protected]
Connector Junction Box is already being used.
Cable length
500 mm
Model
XS2W-D421-BY1
Internal Wiring
(Proximity Sensor end)
(Wired end)
1
4
4
3
Models with conventional connector pin assignments are available as well.
Appearance
Shielded
Unshielded
NO
Model
Applicable connector code *
NC
Applicable connector code *
M8
E2E-X2D1-M1
C
E2E-X2D2-M1
D
M12
E2E-X3D1-M1
C
E2E-X3D2-M1
D
M18
E2E-X7D1-M1
C
E2E-X7D2-M1
D
M30
E2E-X10D1-M1
C
E2E-X10D2-M1
D
M8
E2E-X4MD1-M1
C
E2E-X4MD2-M1
D
M12
E2E-X8MD1-M1
C
E2E-X8MD2-M1
D
M18
E2E-X14MD1-M1
C
E2E-X14MD2-M1
D
M30
E2E-X20MD1-M1
C
E2E-X20MD2-M1
D
* Refer to page 22 for details.
9
E2E
2-Wire Models
AC 2-Wire Models Shielded Models [Refer to Dimensions on page 27.]
Appearance
M8
Sensing distance
Connection
method
Pre-wired Models
(2 m)
1.5 mm
Pre-wired Models
(2 m)
M12
2 mm
M12 Connector
Models
Pre-wired Models
(2 m)
M18
5 mm
M12 Connector
Models
Pre-wired Models
(2 m)
M30
10 mm
M12 Connector
Models
Cable
specifications
PVC (oil-resistant)
PVC (oil-resistant)
--PVC (oil-resistant)
--PVC (oil-resistant)
---
Operation
mode
NO
NC
NO
NC
Pin
arrangement
Applicable connector code *2
---
---
---
---
Model
E2E-X1R5Y1 2M
E2E-X1R5Y2 2M
E2E-X2Y1 2M *1
E2E-X2Y2 2M
NO
(3, 4): (AC, AC)
E
E2E-X2Y1-M1
NC
(1, 2): (AC, AC)
F
E2E-X2Y2-M1
NO
NC
---
---
E2E-X5Y1 2M *1
E2E-X5Y2 2M
NO
(3, 4): (AC, AC)
E
E2E-X5Y1-M1
NC
(1, 2): (AC, AC)
F
E2E-X5Y2-M1
NO
NC
---
---
E2E-X10Y1 2M *1
E2E-X10Y2 2M
NO
(3, 4): (AC, AC)
E
E2E-X10Y1-M1
NC
(1, 2): (AC, AC)
F
E2E-X10Y2-M1
*1. Models with different frequencies are also available. The model number is E2E-X @[email protected] (example: E2E-X5Y15 2M).
*2. Refer to page 22 for details.
Unshielded Models
Appearance
M8
Sensing distance
Connection
method
Pre-wired Models
(2 m)
2 mm
Pre-wired Models
(2 m)
M12
5 mm
M12 Connector
Models
Pre-wired Models
(2 m)
M18
10 mm
M12 Connector
Models
Pre-wired Models
(2 m)
Cable
specifications
PVC (oil-resistant)
PVC (oil-resistant)
--PVC (oil-resistant)
--PVC (oil-resistant)
18 mm
M30
M12 Connector
Models
---
Operation
mode
NO
NC
NO
NC
Pin
arrangement
Applicable connector code *2
---
---
---
---
NO
(3, 4): (AC, AC)
E
NC
(1, 2): (AC, AC)
F
NO
NC
--(3, 4): (AC, AC)
E
NC
(1, 2): (AC, AC)
F
NO
NC
---
E2E-X2MY2 2M
E2E-X5MY1 2M *1
E2E-X5MY2 2M
E2E-X5MY1 2M
E2E-X5MY2-M1
---
NO
Model
E2E-X2MY1 2M
E2E-X10MY1 2M *1
E2E-X10MY2 2M
E2E-X10MY1-M1
E2E-X10MY2-M1
---
E2E-X18MY1 2M *1
E2E-X18MY2 2M
NO
(3, 4): (AC, AC)
E
E2E-X18MY1-M1
NC
(1, 2): (AC, AC)
F
E2E-X18MY2-M1
*1. Models with different frequencies are also available. The model number is E2E-X @[email protected] (example: E2E-X5MY15 2M).
*2. Refer to page 22 for details.
AC 2-Wire Models Shielded Models [Refer to Dimensions on page 27.]
(There are no unshielded models.)
Appearance
M12
M18
M30
Sensing distance
3 mm
7 mm
10 mm
Connection
method
Cable
specifications
Pre-wired Models
(2 m)
PVC (oil-resistant)
Pre-wired Models
(2 m)
PVC (oil-resistant)
Pre-wired Models
(2 m)
PVC (oil-resistant)
Operation
mode
NO
Pin
arrangement
Applicable
connector code
---
---
E2E-X3T1 2M
---
---
E2E-X7T1 2M
---
---
E2E-X10T1 2M
Model
Note: Not compliant with CE.
10
E2E
3-Wire Models
Shielded DC 3-Wire Models [Refer to Dimensions on page 27.]
Appearance
Sensing distance
Connection
method
Pre-wired Models
(2 m)
M8
1.5 mm
2 mm
10 mm
PVC (oil-resistant)
NC
---
M12 Connector
Models
Pre-wired Models
(2 m)
M30
NO
M8 Connector
Models
M12 Connector
Models
5 mm
PVC (oil-resistant)
---
Pre-wired Models
(2 m)
M18
Operation
mode
M12 Connector
Models
Pre-wired Models
(2 m)
M12
Cable
specifications
M12 Connector
Models
PVC (oil-resistant)
---
---
Model
NPN output
PNP output
E2E-X1R5E1 2M
E2E-X1R5F1 2M
E2E-X1R5E2 2M
E2E-X1R5F2 2M
NO
B
E2E-X1R5E1-M1
E2E-X1R5F1-M1
NC
1: +V, 3: 0 V,
2: Control output
D
E2E-X1R5E2-M1
E2E-X1R5F2-M1
NO
1: +V, 3: 0 V,
4: Control output
E2E-X1R5E1-M3
E2E-X1R5F1-M3
NC
1: +V, 3: 0 V,
2: Control output
E2E-X1R5E2-M3
E2E-X1R5F2-M3
NO
I
E2E-X2E1 2M *1
E2E-X2F1 2M *1
E2E-X2E2 2M
E2E-X2F2 2M
B
E2E-X2E1-M1
E2E-X2F1-M1
D
E2E-X2E2-M1
E2E-X2F2-M1
---
---
NO
1: +V, 3: 0 V,
4: Control output
NC
1: +V, 3: 0 V,
2: Control output
---
---
NO
1: +V, 3: 0 V,
4: Control output
NC
1: +V, 3: 0 V,
2: Control output
NC
NO
NC
---
PVC (oil-resistant)
Applicable
connector code
*2
1: +V, 3: 0 V,
4: Control output
---
PVC (oil-resistant)
Pin
arrangement
NO
E2E-X5E1 2M *1
E2E-X5F1 2M *1
E2E-X5E2 2M
E2E-X5F2 2M
B
E2E-X5E1-M1
E2E-X5F1-M1
D
E2E-X5E2-M1
E2E-X5F2-M1
E2E-X10E1 2M *1
E2E-X10F1 2M
E2E-X10E2 2M
E2E-X10F2 2M
---
---
NO
1: +V, 3: 0 V,
4: Control output
B
E2E-X10E1-M1
E2E-X10F1-M1
NC
1: +V, 3: 0 V,
2: Control output
D
E2E-X10E2-M1
E2E-X10F2-M1
NC
---
*1. Models with different frequencies are also available. The model number is E2E-X@@@5 (example: E2E-X5E15 2M).
*2. Refer to page 22 for details.
11
E2E
3-Wire Models
Unshielded DC 3-Wire Models [Refer to Dimensions on page 27.]
Appearance
Sensing distance
Connection
method
Pre-wired Models
(2 m)
M8
2 mm
5 mm
---
M8 Connector
Models
---
M12 Connector
Models
Pre-wired Models
(2 m)
M18
10 mm
M12 Connector
Models
Pre-wired Models
(2 m)
M30
PVC (oil-resistant)
M12 Connector
Models
Pre-wired Models
(2 m)
M12
Cable
specifications
Applicable
connector code
*2
---
---
NO
1: +V, 3: 0 V,
4: Control output
NC
1: +V, 3: 0 V,
2: Control output
NO
1: +V, 3: 0 V,
4: Control output
NO
NC
NC
PVC (oil-resistant)
NO
PVC (oil-resistant)
NPN output
PNP output
E2E-X2ME1 2M
E2E-X2MF1 2M
E2E-X2ME2 2M
E2E-X2MF2 2M
B
E2E-X2ME1-M1
E2E-X2MF1-M1
D
E2E-X2ME2-M1
E2E-X2MF2-M1
E2E-X2ME1-M3
E2E-X2MF1-M3
E2E-X2ME2-M3
E2E-X2MF2-M3
I
E2E-X5ME1 2M *1
E2E-X5MF1 2M
E2E-X5ME2 2M
E2E-X5MF2 2M
---
NO
1: +V, 3: 0 V,
4: Control output
B
E2E-X5ME1-M1
E2E-X5MF1-M1
NC
1: +V, 3: 0 V,
2: Control output
D
E2E-X5ME2-M1
E2E-X5MF2-M1
---
---
NO
1: +V, 3: 0 V,
4: Control output
NC
NO
NC
E2E-X10ME1 2M *1 E2E-X10MF1 2M
E2E-X10ME2 2M
E2E-X10MF2 2M
B
E2E-X10ME1-M1
E2E-X10MF1-M1
1: +V, 3: 0 V,
2: Control output
D
E2E-X10ME2-M1
E2E-X10MF2-M1
---
---
NO
1: +V, 3: 0 V,
4: Control output
NC
1: +V, 3: 0 V,
2: Control output
---
PVC (oil-resistant)
1: +V, 3: 0 V,
2: Control output
Model
---
NC
---
18 mm
M12 Connector
Models
Pin
arrangement
Operation
mode
NO
NC
---
E2E-X18ME1 2M *1 E2E-X18MF1 2M
E2E-X18ME2 2M
E2E-X18MF2 2M
B
E2E-X18ME1-M1
E2E-X18MF1-M1
D
E2E-X18ME2-M1
E2E-X18MF2-M1
*1. Models with different frequencies are also available. The model number is [email protected]@@5 (example: E2E-X5ME15 2M).
*2. Refer to page 22 for details.
12
E2E
Ratings and Specifications
[email protected]@ DC 2-Wire Models
Size
Shielded
Item
M8
Shielded
M12
Unshielded
Model E2E-X2D@
Shielded
M18
Unshielded
Shielded
M30
Unshielded
Shielded
Unshielded
E2E-X4MD@
E2E-X3D@
E2E-X8MD@
E2E-X7D@
E2E-X14MD@
E2E-X10D@
E2E-X20MD@
Sensing distance
2 mm ±10%
4 mm ±10%
3 mm ±10%
8 mm ±10%
7 mm ±10%
14 mm ±10%
10 mm ±10%
20 mm ±10%
Set distance *1
0 to 1.6 mm
0 to 3.2 mm
0 to 2.4 mm
0 to 6.4 mm
0 to 5.6 mm
0 to 11.2 mm
0 to 8 mm
0 to 16 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 17 and 18.
Standard sensing
object
Iron,
8 × 8 × 1 mm
Iron,
Iron,
Iron,
Iron,
Iron, 30 × 30 × 1 mm
20 × 20 × 1 mm 12 × 12 × 1 mm 30 × 30 × 1 mm 18 × 18 × 1 mm
Iron,
54 × 54 × 1 mm
Response frequency
*2
1.5 kHz
1 kHz
0.1 kHz
Power supply voltage
(operating voltage
range)
Standard Models: 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC)
US Models and Connector Models Used as UL-certified Models:
12 to 24 VDC, ripple (p-p): 10% max. (The operating voltage range is also the same.) *3
Leakage current
0.8 mA max.
Control
output
10% max. of sensing distance
0.8 kHz
0.5 kHz
Load
current
3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models
Residual
voltage
*4
3 V max. (Load current: 100 mA, Cable length: 2 m, M1J-T Models only: 5 V max.)
0.4 kHz
Indicators
D1 Models: Operation indicator (red) and setting indicator (green)
D2 Models: Operation indicator (red)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
Diagnostic output
delay
0.3 to 1 s
Protection circuits
Surge suppressor, Load short-circuit protection (for control and diagnostic output)
Ambient
temperature range
Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation)
Ambient
humidity range
Operating/storage: 35% to 95% (with no condensation)
Temperature
influence
±15% max. of sensing distance
at 23°C in the temperature range
of −25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2
10 times each in X, Y, and
Z directions
Degree of protection
Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant
Connector Models: IEC 60529 IP67
Connection method
Pre-wired Models (Standard cable length: 2 m), Connector Models, or Pre-wired Connector Models (Standard cable length: 0.3 m)
Pre-wired
Models
Weight
Pre-wired
(packConnector
ed
Models
state)
Connector
Models
Case
Sensing surface
MateriClamping
als
nuts
Toothed
washer
Accessories
Refer to the timing charts under I/O Circuit Diagrams on page 20 for details.
Approx. 60 g
±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Approx. 70 g
Approx. 130 g
Approx. 175 g
Approx. 40 g
Approx. 70 g
Approx. 110 g
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Stainless steel (SUS303)
Nickel-plated brass
---
PBT
Nickel-plated brass
Zinc-plated iron
Instruction manual
*1. Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3. For the information on UL-certified connector models, refer to your OMRON website.
*4. The residual voltage of each M1J-T Model is 5 V. When connecting to a device, make sure that the device can withstand the residual voltage. (Refer to page 26 for
details.)
13
E2E
[email protected]@ AC 2-Wire Models
Size
Shielded
Item
M8
Shielded
Model E2E-X1R5Y@
M12
Unshielded
E2E-X2MY@
Shielded
E2E-X2Y@
M18
Unshielded
E2E-X5MY@
Shielded
E2E-X5Y@
M30
Unshielded
Shielded
Unshielded
E2E-X10MY@
E2E-X10Y@
E2E-X18MY@
Sensing distance
1.5 mm ±10%
2 mm ±10%
5 mm ±10%
10 mm ±10%
18 mm ±10%
Set distance
0 to 1.2 mm
0 to 1.6 mm
0 to 4 mm
0 to 8 mm
0 to 14 mm
Differential travel
10% max. of sensing distance
Detectable object
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 18.)
Standard sensing
object
Iron,
8 × 8 × 1 mm
Response frequency
25 Hz
Power supply voltage
(operating voltage
range)*1
24 to 240 VAC (20 to 264 VAC), 50/60 Hz
Leakage current
1.7 mA max.
Control
output
Iron, 12 × 12 × 1 mm
Load
current *2
5 to 100 mA
Residual
voltage
Refer to Engineering Data on page 19.
Iron,
Iron,
Iron, 30 × 30 × 1 mm
15 × 15 × 1 mm 18 × 18 × 1 mm
5 to 200 mA
5 to 300 mA
Indicators
Operation indicator (red)
Operation mode
(with sensing object
approaching)
Y1 Models: NO
Y2 Models: NC
Protection circuits
Surge suppressor
Ambient temperature
range *1*2
Operating/Storage: −25 to 70°C
(with no icing or condensation)
Ambient
humidity range
Operating/storage: 35% to 95% (with no condensation)
Temperature
influence
±10% max. of sensing distance
at 23°C in the temperature range
of −25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
4,000 VAC (M8 Models: 2,000 VAC), 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2
10 times each in X, Y, and
Z directions
Degree of protection
Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant
Connector Models: IEC 60529 IP67
Connection method
Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight
(packed
state)
Materials
Accessories
Iron,
54 × 54 × 1 mm
Refer to the timing charts under I/O Circuit Diagrams on page 21 for details.
Operating/Storage: −40 to 85°C (with no icing or condensation)
±15% max. of sensing distance at 23°C in the temperature range of −40 to 85°C,
±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Prewired
Models
Model
Approx. 60 g
Approx. 70 g
Approx. 130 g
Approx. 175 g
Connector
Models
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Case
Stainless steel (SUS303)
Nickel-plated brass
Sensing
surface
PBT
Clamping nuts
Nickel-plated brass
Toothed
washer
Zinc-plated iron
Instruction manual
*1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is at least −25°C.
*2. When using an M18 or M30 Connector Model at an ambient temperature between 70 and 85°C, make sure that the Sensor has a control output (load current) of
5 to 200 mA max.
14
E2E
[email protected] AC/DC 2-Wire Models
Size
M12
M18
E2E-X3T1
E2E-X7T1
Shielded
Item
M30
Shielded
Model
E2E-X10T1
Sensing distance
3 mm ±10%
7 mm ±10%
10 mm ±10%
Set distance
0 to 2.4 mm
0 to 5.6 mm
0 to 8 mm
Differential travel
10% max. of sensing distance
Detectable object
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 17.)
Iron, 12 × 12 × 1 mm
Iron, 18 × 18 × 1 mm
Iron, 30 × 30 × 1 mm
DC
1 kHz
0.5 kHz
0.4 kHz
AC
25 Hz
Standard sensing object
Response
frequency *1
Power supply voltage
24 to 240 VDC (20 to 264 VDC)
(operating voltage range) *2 48 to 240 VAC (40 to 264 VAC)
Leakage current
Control
output
DC: 1 mA max.
AC: 2 mA max.
Load
current
5 to 100 mA
Residual
voltage
DC: 6 V max. (Load current: 100 mA, Cable length: 2 m)
AC: 10 V max. (Load current: 5 mA, Cable length: 2 m)
Indicators
Operation indicator (red), Setting indicator (green)
Operation mode
(with sensing object
approaching)
NO (Refer to the timing charts under I/O Circuit Diagrams on page 21 for details.)
Protection circuits
Load short-circuit protection (20 to 40 VDC only), Surge suppressor
Ambient temperature range Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation)
Ambient humidity range
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
4,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67, in-house standards: oil-resistant
Connection method
Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)
Materials
Accessories
Approx. 80 g
Case
Nickel-plated brass
Sensing
surface
PBT
Clamping
nuts
Nickel-plated brass
Toothed
washer
Zinc-plated iron
Approx. 140 g
Approx. 190 g
Instruction manual
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and
a set distance of half the sensing distance.
*2. Power Supply Voltage Waveform:
Use a sine wave for the power supply. Using a rectangular AC power supply may result in faulty reset.
15
E2E
[email protected]@/F@ DC 3-Wire Models
Size
Shielded
M8
Shielded
M12
Unshielded
Shielded
Shielded
Unshielded
E2E
-X10ME@/F@
E2E-X10E@/
F@
E2E
-X18ME@/F@
Sensing distance
1.5 mm ±10%
2 mm ±10%
5 mm ±10%
10 mm ±10%
18 mm ±10%
Set distance
0 to 1.2 mm
0 to 1.6 mm
0 to 4 mm
0 to 8 mm
0 to 14 mm
Differential travel
10% max. of sensing distance
Detectable object
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 18.)
Standard sensing
object
Iron,
8 × 8 × 1 mm
Iron, 12 × 12 × 1 mm
Iron,
15 ×15 × 1 mm
Iron,
Iron, 30 × 30 × 1 mm
18 × 18 × 1 mm
Iron,
54 × 54 × 1 mm
Response frequency
*1
2 kHz
0.8 kHz
0.4 kHz
0.6 kHz
0.1 kHz
Power supply voltage
(operating voltage
range) *2
12 to 24 VDC, ripple(p-p): 10% max. (10 to 30 VDC)
Connector Models Used as UL-certified Models: 12 to 24 VDC, ripple (p-p): 10% max. (The operating voltage range is also the same.) *3
Current consumption
13 mA max.
Control
output
Load
current *2
200 mA max.
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
E2E
-X5E@/F@
M30
Unshielded
E2E
-X2ME@/F@
1.5 kHz
E2E
-X5ME@/F@
Shielded
E2E
Model
-X1R5E@/F@
Item
E2E
-X2E@/F@
M18
Unshielded
0.2 kHz
Indicators
Operation indicator (red)
Operation mode
(with sensing object
approaching)
E1/F1 Models: NO
E2/F2 Models: NC
Refer to the timing charts under /O Circuit Diagrams on page 21 for details.
Protection circuits
Load short-circuit protection, Surge suppressor, Reverse polarity protection
Ambient
temperature range *2
Operating/Storage: −40 to 85°C (with no icing or condensation)
Ambient humidity
range
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±15% max. of sensing distance at 23°C in the temperature range of −40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2
10 times each in X, Y, and
Z directions
Degree of protection
Pre-wired Models : IEC 60529 IP67, in-house standards: oil-resistant
Connector Models : IEC 60529 IP67
Connection method
Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight
(packed
state)
Materials
Accessories
0.4 kHz
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Prewired
Models
Approx. 65 g
Approx. 75 g
Approx. 150 g
Approx. 195 g
Connector
Models
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Case
Stainless steel (SUS303)
Nickel-plated brass
Sensing
surface
PBT
Clamping nuts
Nickel-plated brass
Toothed
washer
Zinc-plated iron
Instruction manual
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and
a set distance of half the sensing distance.
*2. When using an M8 Model at an ambient temperature between 70 and 85°C, supply 10 to 30 VDC to the Sensor and make sure that the Sensor has a control output
of 100 mA maximum.
*3. For the information on UL-certified connector models, refer to your OMRON website.
16
E2E
Engineering Data (Reference Value)
Sensing Area
Shielded Models
[email protected]@[email protected]@[email protected]@
12
Distance X (mm)
Distance X (mm)
[email protected]@[email protected]
E2E-X10
10
8
E2E-X7
6
E2E-X10
10
Y
8
X
6
E2E-X3
E2E-X5
E2E-X2
Y
4
12
E2E-X2
4
X
2
0
−20
E2E
-X1R5
2
−15
−10
−5
0
5
0
−15
10
15
Distance Y (mm)
−10
−5
0
5
10
Distance Y (mm)
Unshielded Models
[email protected]@[email protected]@[email protected]@
Distance X (mm)
Distance X (mm)
[email protected]@
30
25
20
30
Y
X
25
20
E2E-X18M
E2E
-X20M
15
E2E-X10M
Y
10
10
X
E2E-X5M
E2E
-X8M
5
0
−30
15
E2E
-X14M
E2E-X2M
5
E2E
-X4M
−20
−10
0
0
−30
10
20
Distance Y (mm)
−20
−10
0
10
20
Distance Y (mm)
Influence of Sensing Object Size and Material
E2E-X3D@/-X3T1
d×
d
X
2.5
t = 1 mm
Iron
2.0
E2E-X7D@/-X7T1
4.0
3.5
d×
d
X
Distance X (mm)
3.0
Distance X (mm)
Distance X (mm)
E2E-X2D@
t = 1 mm
3.0
Iron
Stainless
steel
(SUS304)
1.0
Aluminum
Copper
2.0
4
1.5
Brass
3
1.0
Aluminum
Copper
2
5
10
15
20
25
0
5
10
d×
d
X
10
t = 1 mm
Iron
8
6
Stainless
steel
(SUS304)
4
Brass
Aluminum
Copper
0
15
20
25
30
35
20
30
40
50
60
70
Side length of sensing object: d (mm)
0
40
10
20
E2E-X8MD@
6
d×
d
X
5
t = 1 mm
4
Iron
3
Stainless
steel
(SUS304)
0
30
12
10
d×
d
X
Iron
8
Stainless
steel
(SUS304)
4
Brass
Aluminum
Copper
2
10
20
30
40
50
60
70
Side length of sensing object: d (mm)
50
t = 1 mm
6
Brass
Aluminum
Copper
40
Side length of sensing object: d (mm)
E2E-X4MD@
1
10
Copper
Side length of sensing object: d (mm)
2
2
Aluminum
Distance X (mm)
Distance X (mm)
12
Stainless
steel
(SUS304)
Brass
Distance X (mm)
Side length of sensing object: d (mm)
E2E-X10D@/-X10T1
Iron
1
0.5
0
t = 1 mm
X
6
Stainless
steel
(SUS304)
Brass
0.5
d×
d
7
5
2.5
1.5
8
0
10 15 20
30
40
50
60
70
Side length of sensing object: d (mm)
17
25
d×
d
t = 1 mm
X
20
15
E2E-X1R5E@/-X1R5Y@/-X1R5F@
10
20
30
40
d×
d
X
Iron
20
50
70
X
t = 1 mm
Iron
2.0
Stainless steel
(SUS304)
1.5
t = 1 mm
Stainless steel
(SUS304)
1.0
Brass
Aluminum
Copper
Brass
0
Aluminum
0.5
10
20
30
40
50
60
70
80
0
90 100
5
Side length of sensing object: d (mm)
10
15
20
E2E-X5E@/-X5Y@/-X5F@
E2E-X10E@/-X10Y@/-X10F@
7
d×
d
6
X
t = 1 mm
Iron
5
12
d×
d
X
10
t = 1 mm
8
Iron
Stainless steel (SUS304)
Stainless steel
(SUS304)
4
25
Side length of sensing object: d (mm)
Distance X (mm)
2.5
X
2.0
Distance X (mm)
Distance X (mm)
E2E-X2E@/-X2Y@/-X2F@
d×
d
Iron
5
60
2.5
1.5
Stainless
steel
(SUS304)
Side length of sensing object: d (mm)
d×
d
t = 1 mm
10
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
5
25
15
Iron
10
0
E2E-X20MD@
Distance X (mm)
Distance X (mm)
E2E-X14MD@
Distance X (mm)
E2E
6
3
1.0
Brass
Brass
2
Brass
0.5
4
Aluminum
Aluminum
Aluminum
2
1
5
10
15
20
0
25
10
2.5
d×
d
X
30
40
50
E2E-X5ME@/-X5MY@/-X5MF@
Distance X (mm)
Distance X (mm)
E2E-X2ME@/-X2MY@/-X2MF@
20
t = 1 mm
Iron
2.0
Stainless steel
(SUS304)
1.5
0
10
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
7
6
d×
d
20
40
50
60
E2E-X10ME@/-X10MY@/-X10MF@
t = 1 mm
X
Iron
5
12
d×
d
X
10
t = 1 mm
Iron
8
Stainless steel
(SUS304)
4
30
Side length of sensing object: d (mm)
Distance X (mm)
0
Stainless steel (SUS304)
6
3
Brass
1.0
Aluminum
Brass
4
Aluminum
2
0.5
Aluminum
1
0
5
10
15
20
25
Brass
2
Copper
30
Side length of sensing object: d (mm)
0
10
20
30
40
50
Side length of sensing object: d (mm)
0
10
20
30
40
50
60
Side length of sensing object: d (mm)
Distance X (mm)
E2E-X18ME@/-X18MY@/-X18MF@
25
d×
d
X
t = 1 mm
20
Iron
15
Stainless steel (SUS304)
10
Brass
5
0
Aluminum
20
40
60
80
100
Side length of sensing object: d (mm)
18
E2E
Leakage Current
0.8
E2E-X10D1-N
0.6
E2E-X3D1-N
[email protected]
Leakage current (mA)
[email protected]@
1.0
Leakage current (mA)
Leakage current (mA)
[email protected]@
1.4
1.2
1.0
0.8
1.4
1.2
AC power
1.0
0.8
DC power
0.6
0.4
E2E-X2D1-N
0.6
Protective
resistance
0.4
mA
0.4
~
E2E-X7D1-N
0.2
V
~
0.2
AC
power
Proximity
Sensor (OFF)
0
5
10
15
20
25
30
0
50
100
150
Power supply voltage (V)
200
0.2
250
300
0
50
100
150
Power supply voltage (V)
200
250
300
Power supply voltage (V)
Residual Output Voltage
[email protected]
4
[email protected]
3
[email protected]@
6
24 VDC
4
3
1
2
3
5
10
30
50
100
100 VAC
5
2
0
1
200 VAC
1
3
5
10
30
30
25
20
Residual output voltage
ON
15
Residual output voltage
100
ON
80
V
~
60
5
Residual load
voltage
0
1
3
5
10
30
240
Residual output voltage
200
ON
160
V
~
120
VL
VL
100 VAC
A
~
40
VL
A
~
[email protected]@ at 200 VAC
120
V
~
10
100
[email protected]@ at 100 VAC
Load voltage VL (V)
Load voltage VL (V)
[email protected]@ at 24 VAC
50
Load current (mA)
Load current (mA)
Load voltage VL (V)
5
Residual output voltage (V)
Residual output voltage (V)
[email protected]@
200 VAC
A
~
80
24 VAC
20
OFF
50 100
300 500
Load current (mA)
40
Residual load
voltage
0
1
3
5
OFF
10
30
50
100
300 500
Load current (mA)
Residual
load voltage
0
1
3
OFF
5
10
30
50
100
300 500
Load current (mA)
19
E2E
I/O Circuit Diagrams
[email protected]@ DC 2-Wire Models
Operation
mode
Model
Timing Chart
Output circuit
Polarity: Yes
1
[email protected]
[email protected](J)
[email protected](-M1TGJ)-U
[email protected]
[email protected](-M1TGJ)-US
Set position
Unstable
Non-sensing sensing
area
area
Stable sensing area
Proximity Sensor
Sensing
object
Without
selfdiagnostic
output:
NO
Proximity
Sensor
main
circuit
Load
Brown
+V
4
0V
Blue
Note: The load can be connected to either the
+V or 0 V side.
100 80
(%)
0
Rated
sensing
distance
Polarity: None
ON
Setting indicator
OFF (green)
4
Load
ON
Operation
OFF indicator (red)
ON
[email protected]
OFF
Control output
Proximity
Sensor
main
circuit
+V
(0 V)
3
0V
(+V)
Note 1. The load can be connected to either the +V or
0 V side.
2. The [email protected] has no polarity.
Therefore, terminals 3 and 4 have no polarity.
Non-sensing
area
Sensing area
Proximity Sensor
Without
selfdiagnostic
output:
NC
[email protected]
[email protected]
[email protected](-M1TGJ)-U
[email protected]
[email protected](-M1TGJ)-US
Sensing
object
100
(%)
Proximity
Sensor
main
circuit
0
Rated
sensing
distance
1
Operation
indicator (red)
ON
OFF
Unstable
Non-sensing sensing
area
area
[email protected]
[email protected]
0V
Note: The load can be connected to either the +V
or 0 V side.
Control output
Set position
Stable sensing area
Proximity Sensor
Sensing
object
With selfdiagnostic
output:
NO
+V
2
Blue
ON
OFF
(%)
Load
Brown
Brown (4)
100 80
Rated
sensing
distance
Load
0
ON
OFF Setting indicator
ON
(green)
OFF Operation
ON
Proximity
Sensor
main
circuit
+V
Load
Orange (2)
(diagnostic
output)
+V
Blue (3)
indicator (red)
0
OFF Control output
ON
OFF Diagnostic output*
Note: Connect both the loads to the +V side of
the control output and diagnostic output.
* The diagnostic output is ON when there is a coil
burnout or the sensing object is located in the
unstable sensing area for 0.3 s or longer.
20
E2E
DC 3-Wire Models
Operation
mode
Output
specifications
Model
Timing Chart
Sensing
object
Present
Not present
Operation
indicator (red)
NO
1
+V
ON
100 Ω
OFF
Control output
(between brown
and black leads)
Output voltage
(between black
and blue leads)
[email protected]@
NPN output [email protected]@-M1
[email protected]@-M3
Output circuit
Brown
Load
ON
Proximity
Sensor
main
circuit
OFF
High
Low
Constant
current*
4 2
Black
Tr
3
0V
Present
Sensing object
Blue
Not present
Operation indicator
(red)
*Constant current output is 1.5 to 3 mA.
Note: For Connector Models, the
connection between pins 1, 4 and 3
uses an NO contact, and the
connection between pins 1, 2 and 3
uses an NC contact.
ON
OFF
NC
Control output
(between brown and ON
black leads)
OFF
Output voltage
High
(between black and
Low
blue leads)
Present
Sensing object
1
Not present
Operation indicator
(red)
NO
+V
ON
OFF
Control output
(Between blue and
black leads)
ON
OFF
Output voltage
(between brown
and black leads)
[email protected]@
PNP output [email protected]@-M1
[email protected]@-M3
Brown
High
Proximity
Sensor
main
circuit
4 2
Black
Load
Low
3
100 Ω
Present
Sensing object
Tr
*
Blue
0V
Not present
Operation indicator
(red)
NC
ON
OFF
Control output
(Between blue and
black leads)
ON
OFF
Output voltage
(between brown
and black leads)
High
*When a transistor is connected
Note: For Connector Models, the
connection between pins 1, 4 and 3
uses an NO contact, and the
connection between pins 1, 2 and 3
uses an NC contact.
Low
AC 2-Wire Models
Operation
mode
Model
Timing Chart
Sensing
object
NO
Output circuit
Present
Brown 3 (or 1)
Not present
Load
Operation
indicator (red)
ON
Proximity
Sensor
main
circuit
OFF
Operate
Control output
Reset
[email protected]@
[email protected]@-M1
Present
Blue 4 (or 2)
Sensing
object Not present
ON
Operation
indicator (red) OFF
NC
Control
output
Note: For Connector Models, the connection
between pins 3 and 4 uses an NO
contact, and the connection between
pins 1 and 2 uses an NC contact.
Operate
Reset
AC/DC 2-Wire Models
Operation
mode
Model
Timing Chart
Output circuit
Unstable Set position
Non-sensing sensing
area
Stable sensing area
area
Brown
Proximity Sensor
Sensing
object
NO
[email protected]
(%)
100 80
Rated
sensing
distance
Proximity
Sensor
main
circuit
Load
Power
supply
24 to 240 VDC
48 to 240 VAC
0
Blue
ON
Setting indicator
OFF (green)
ON
Operation
OFF indicator (red)
ON
OFF
Control output
Note: The load can be connected to either the +V or
0 V side.
There is no need to be concerned about the
polarity (brown/blue) of the Proximity Sensor.
21
E2E
Sensor I/O Connectors (Sockets on One Cable End)
Model for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.
[Refer to Dimensions for the XS2, XS3, and XS5.]
Applicable
connector
code
Screw
A
B
Straight
L-shape
Straight
L-shape
Connector
Cable length 2m
CablConnector
model number
XS2F-D421-DA0-F
XS2F-D422-DA0-F
XS2F-D421-DC0-F
XS2F-D422-DC0-F
Cable length 5m
CablConnector
model number
XS2F-D421-GA0-F
XS2F-D422-GA0-F
XS2F-D421-GC0-F
XS2F-D422-GC0-F
Straight
XS2F-D421-DD0
XS2F-D421-GD0
L-shape
XS2F-D422-DD0
XS2F-D422-GD0
Straight
XS2F-D421-D80-F
XS2F-D421-G80-F
Appearance *1
C
D
M12
L-shape
Straight
L-shape
Straight
XS2F-D422-D80-F
XS2F-D422-G80-F
XS2F-A421-DB0-F
XS2F-A422-DB0-F
XS2F-A421-D90-F
XS2F-A421-GB0-F
XS2F-A422-GB0-F
XS2F-A421-G90-F
G
Smartclick Connector,
XS5F-D421-D80-F
Straight
XS5F-D421-G80-F
H
Smartclick Connector,
Straight
XS5F-D421-D80-P
Oil-resistant
Reinforced Cables
XS5F-D421-G80-P
E
F
Straight
I
XS3F-M421-402-A
XS3F-M421-405-A
M8
L-shape
XS3F-M422-402-A
XS3F-M422-405-A
Applicable Proximity
Sensor model
number
Connection
diagram
No. *2
[email protected](J)
1
[email protected]
[email protected]
10
[email protected]
[email protected]
[email protected]
[email protected]
[email protected](J)
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected](J)
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
3
2
3
2
6
8
7
5
11
6
8
7
5
11
[email protected]
14
[email protected]
[email protected](-US)
[email protected]
15
16
17
[email protected]
18
[email protected]
19
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
E2E-X@E2-M3
E2E-X@F2-M3
4
9
12
13
4
9
12
13
Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details and for information on Cable length and Robotics Cables.
*1. Images of straight and L-shaped connectors.
M12 Straight
M12 L-shape
M8 Straight
M8 L-shape
*2. Refer to Connection Diagrams on page 23 for information on Proximity Sensor and I/O Connector connections.
22
E2E
Connections for Sensor I/O Connectors
Type
Operation
mode
Model
Sensor I/O Connector
model number
1: Straight
2: L-shape
1
DC 2-wire
(IEC pin wiring)
E2E-X@D1-M1G/M1GJ
XS2F-D42@-@A0-F
D: 2-m cable
G: 5-m cable
1: Straight
2: L-shape
2
DC 2-wire
(previous pin
wiring)
E2E-X@D1-M1
XS2F-D42@-@D0
Connections
E2E
Main
circuit
Proximity Sensor
D: 2-m cable
G: 5-m cable
3
DC 2-wire
(no polarity)
NO
E2E-X@D1-M1J-T
XS2F-D42@-@D0
D: 2-m cable
G: 5-m cable
4
DC 2-wire
(M8 connector)
E2E-X@D1-M3G
XS3F-M42@-40@-A
2: 2-m cable
5: 5-m cable
5
E2E-X@D1S-M1
XS2F-D42@-@80-F
D: 2-m cable
G: 5-m cable
6
DC 2-wire
(IEC pin wiring)
E2E-X@D2-M1G/M1GJ
XS2F-D42@-@80-F
D: 2-m cable
G: 5-m cable
E2E-X@D2-M1
D: 2-m cable
G: 5-m cable
NC
8
DC 2-wire
(no polarity)
XS2F-D42@-@80-F
1: Straight
2: L-shape
E2E-X@D2-M1J-T
XS2F-D42@-@80-F
D: 2-m cable
G: 5-m cable
9
DC 2-wire
(M8 connector)
E2E-X@D2-M3G
XS3F-M42@-40@-A
2: 2-m cable
5: 5-m cable
1
1
2
2
3
3
4
4
Blue (−)
Blue (−)
Brown (+)
XS2F
1
1
2
2
3
3
4
4
XS3F
1
1
2
2
3
3
4
4
Blue (+) (−)
Brown (−) (+)
*
Brown (+)
White (not connected)
Blue (not connected)
Black (−)
XS2F *
1
1
2
2
3
3
4
4
Brown (not connected)
White (diagnostic output) (+)
Blue (0 V)
Black (control output) (+)
XS2F *
1
1
2
2
3
3
4
4
Brown (+)
White (−)
Blue (not connected)
Black (not connected)
XS2F *
1
1
2
2
3
3
4
4
Brown (not connected)
White (+)
Blue (−)
Black (not connected)
XS2F *
1
1
2
2
3
3
4
4
Brown (+)(−)
White (−)(+)
Blue (not connected)
Black (not connected)
XS3F *
E2E
Main
circuit
1: Straight
2: L-shape
Brown (+)
XS2F
E2E
Main
circuit
7
4
E2E
Main
circuit
1: Straight
2: L-shape
DC 2-wire
(previous pin
wiring)
4
E2E
Main
circuit
1: Straight
2: L-shape
3
E2E
Main
circuit
1: Straight
2: L-shape
DC 2-wire
(diagnostic
type)
2
3
E2E
Main
circuit
1: Straight
2: L-shape
1
2
E2E
Main
circuit
1: Straight
2: L-shape
XS2F
1
E2E
Main
circuit
Connection
diagram No.
1
1
2
2
3
3
4
4
Brown (+)
White (−)
Blue (not connected)
Black (not connected)
* Different from Proximity Sensor wire colors.
23
E2E
Operation
mode
Model
Sensor I/O Connector
model number
1: Straight
2: L-shape
10
NO
E2E-X@E/F1-M1
XS2F-D42@-@C0-F
Connections
E2E
Main
circuit
Proximity Sensor
Type
D: 2-m cable
G: 5-m cable
DC 3-wire
1: Straight
2: L-shape
11
NC
E2E-X@E2/F2-M1
XS2F-D42@-@80-F
D: 2-m cable
G: 5-m cable
NO
E2E-X@E1/F1-M3
2: 2-m cable
5: 5-m cable
DC 3-wire
(M8 connector)
1: Straight
2: L-shape
NC
13
XS3F-M42@-40@-A
E2E-X@E2/F2-M3
XS3F-M42@-40@-A
2: 2-m cable
5: 5-m cable
14
NO
E2E-X@Y1-M1
XS2F-A42@-@B0-F
D: 2-m cable
G: 5-m cable
AC 2-wire
3
4
4
1
2
2
3
3
4
4
NC
E2E-X@Y2-M1
D: 2-m cable
G: 5-m cable
Main
circuit
15
XS3F
1
2
2
3
3
4
4
NO
E2E-X@D1M1TGJ(-US)
D: 2-m cable
G: 5-m cable
Main
circuit
16
1
2
2
3
3
4
4
D: 2-m cable
G: 5-m cable
DC 2-wire
(Smartclick
connector)
18
Main
circuit
NC
XS2F
1
2
2
3
3
4
4
NO
E2E-X@D1M1TGJ-U
D: 2-m cable
G: 5-m cable
1
2
2
3
3
4
4
NC
E2E-X@D2M1TGJ-U
D: 2-m cable
G: 5-m cable
Main
circuit
19
Brown
White
Blue (not connected)
Black (not connected)
XS5F
1
1
2
2
3
3
4
4
Brown (+)
White (not connected)
Blue (not connected)
Black (−)
XS5F
1
1
2
2
3
3
4
4
Brown (+)
White (−)
Blue (not connected)
Black (not connected)
XS5F
1
1
2
2
3
3
4
4
E2E
XS5F-D421-@80-P
Brown
Blue
XS2F *
1
E2E
XS5F-D421-@80-P
Main
circuit
17
XS5F-D421-@80-F
Brown (+V)
White (output)
Blue (0 V)
Black (not connected)
1
E2E
E2E-X@D2M1TGJ-US
Brown (+V)
White (not connected)
Blue (0 V)
Black (output)
XS3F
1
E2E
XS5F-D421-@80-F
Blue (0 V)
Black (output)
Brown (+V)
White (not connected)
Blue (0 V)
Black (output)
1
E2E
XS2F-A421-@90-F
Brown (+V)
XS3F
1
E2E
Main
circuit
1: Straight
2: L-shape
2
3
E2E
Main
circuit
12
1
2
E2E
Main
circuit
1: Straight
2: L-shape
XS2F
1
E2E
Main
circuit
Connection
diagram No.
Brown (+)
White (not connected)
Blue (not connected)
Black (−)
XS5F
1
1
2
2
3
3
4
4
Brown (+)
White (−)
Blue (not connected)
Black (not connected)
* Different from Proximity Sensor wire colors.
Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.
24
E2E
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
CAUTION
• Do not short the load. Explosion or burning may
result.
• Do not supply power to the Sensor with no load,
otherwise Sensor may be damaged.
Precautions for Correct Use
Relationship between Sizes and
Models
Do not use this product under ambient conditions that exceed the
ratings.
● Design
Influence of Surrounding Metal
Model
When mounting the Sensor within a metal panel, ensure that the
clearances given in the following table are maintained. Failure to
maintain these distances may cause deterioration in the performance
of the Sensor.
Shielded
M8
l
Unshielded
n
m
d dia.
D
m
l
Influence of Surrounding Metal
Model
Shielded
DC 2-Wire Models
E2E-X@D@
AC/DC 2-Wire Models
E2E-X@T1
Unshielded
Shielded
DC 3-Wire Models
E2E-X@E@
E2E-X@F@
AC 2-Wire Models
E2E-X@Y@
Unshielded
(Unit: mm)
Item
l
d
D
m
n
l
d
D
m
n
l
d
D
m
n
l
d
D
m
n
M8
M12
M18
M30
M12
0
8
12
Shielded
18
30
20
27
22
70
22
40
70
40
45
30
90
30
70
90
18
30
Unshielded
20
27
22
55
22
40
54
40
45
30
90
30
70
90
Shielded
0
4.5
12
12
24
12
8
24
8
18
15
40
15
20
40
8
12
Unshielded
Shielded
M18
0
0
4.5
12
6
24
6
8
24
8
18
15
40
15
20
36
M30
Unshielded
Model
E2E-X2D@
E2E-X1R5E@
E2E-X1R5F@
E2E-X1R5Y@
E2E-X4MD@
E2E-X2ME@
E2E-X2MF@
E2E-X2MY@
E2E-X3D@
E2E-X2E@
E2E-X2F@
E2E-X2Y@
E2E-X3T1
E2E-X8MD@
E2E-X5ME@
E2E-X5MF@
E2E-X5MY@
E2E-X7D@
E2E-X5E@
E2E-X5F@
E2E-X5Y@
E2E-X7T1
E2E-X14MD@
E2E-X10ME@
E2E-X10MF@
E2E-X10MY@
E2E-X10D@
E2E-X10E@
E2E-X10F@
E2E-X10Y@
E2E-X10T1
E2E-X20MD@
E2E-X18ME@
E2E-X18MF@
E2E-X18MY@
25
E2E
Mutual Interference
Mutual Interference
When installing Sensors face-to-face or
side-by-side, ensure that the minimum
distances given in the following table are
maintained.
(Unit: mm)
Model
DC 2-Wire Models
E2E-X@D@
AC/DC 2-Wire Models
E2E-X@T1
DC 3-Wire Models
E2E-X@E@/X@F@
A
AC 2-Wire Models
E2E-X@Y@
Shielded
Unshielded
Shielded
Unshielded
Item
M8
M12
M18
M30
A
20
30 (20)
50 (30)
100 (50)
B
15
20 (12) *
35 (18) *
70 (35)
A
80
120 (60)
200 (100)
300 (100)
B
60
100 (50)
110 (60)
200 (100)
A
20
30 (20)
50 (30)
100 (50)
B
15
20 (12) *
35 (18) *
70 (35)
A
80
120 (60)
200 (100)
300 (100)
B
60
100 (50)
110 (60)
200 (100)
Note: Values in parentheses apply to Sensors operating at different frequencies.
* Mutual interference will not occur for close-proximity mounting if models with different frequencies are used together.
B
Loads with Large Surge Currents (E2E-X@T@)
If a load with a large surge current is connected, such as a relay, lamp, or motor, the surge current may cause the load short-circuit protection
circuit to operate, resulting in operating errors.
● Mounting
Tightening Force
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Shielded Models
Unshielded Models
Part B Part A
Part B Part A
Note: 1. The allowable tightening strength depends on the distance from the edge
of the head, as shown in the following table. (A is the distance from the
edge of the head. B includes the nut on the head side. If the edge of the
nut is in part A, the tightening torque for part A applies instead.)
2. The following strengths assume washers are being used.
Model
M8
Part A
Dimension
Shielded
9
Unshielded
3
M12
Part B
Torque
Torque
9 N·m
12 N·m
30 N·m
M18
70 N·m
M30
180 N·m
Connecting a DC 2-Wire Proximity Sensor to a PLC (Programmable Controller)
Required Conditions
Connection to a PLC is possible if the specifications of the PLC and the Proximity Sensor satisfy the following
conditions. (The meanings of the symbols are given at the right.)
1. The ON voltage of the PLC and the residual voltage of the Proximity Sensor must satisfy the following.
VON ≤ VCC− VR
2. The OFF current of the PLC and the leakage current of the Proximity Sensor must satisfy the following.
IOFF ≥ Ileak
(If the OFF current is not listed in the PLC’s input specifications, take it to be 1.3 mA.)
3. The ON current of the PLC and the control output of the Proximity Sensor must satisfy the following.
IOUT (min.) ≤ ION ≤ IOUT (max.)
The ON current of the PLC will vary, however, with the power supply voltage and the input impedance, as
shown in the following equation.
ION = (VCC − VR − VPC)/RIN
Example
In this example, the above conditions are checked when the PLC Unit is the C200H-ID212, the Proximity
Sensor is the E2E-X7D1-N, and the power supply voltage is 24 V.
1. VON (14.4 V) ≤ VCc (20.4 V) − VR (3 V) = 17.4 V:OK
2. IOFF (1.3 mA) ≥ Ileak (0.8 mA):
OK
3. ION = [VCC (20.4 V) − VR (3 V) − VPLC (4 V)]/RIN (3 kΩ) = Approx. 4.5 mA
Therefore, IOUT (min.) (3 mA) ≤ ION (4.5 mA): OK
Connection is thus possible.
VON: ON voltage of PLC (14.4 V)
ION: ON current of PLC (typically 7 mA)
IOFF: OFF current of PLC (1.3 mA)
RIN: Input impedance of PLC (3 kΩ)
VPC: Internal residual voltage of PLC (4 V)
VR: Output residual voltage of Proximity Sensor
(3 V)
Ileak: Leakage current of Proximity Sensor
(0.8 mA)
IOUT Control output of Proximity Sensor (3 to
100 mA)
VCC: Power supply voltage (PLC: 20.4 to 26.4 V)
Values in parentheses apply to the following PLC
model and Proximity Sensor model.
PLC:
C200H-ID212
Sensor: E2E-X7D1-N
26
E2E
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Main Units
Model Number-Dimensions Drawing Number Lookup Table
Model
Model
Shielded
Shielded
Pre-wired Models
Unshielded
Shielded
Connector
Models
(M12)
Unshielded
E2E-X2D@(-US)
1
E2E-X1R5E@/F@
1
E2E-X1R5Y@
3
5
E2E-X2E@/F@
5
E2E-X2Y@
7
M18
E2E-X7D@(-US)
10 E2E-X5E@/F@
M30
E2E-X10D@(-US)
M8
E2E-X4MD@(-US)
M12
M18
9
10 E2E-X7T1
10
12 E2E-X10E@/F@
12 E2E-X10Y@
12 E2E-X10T1
12
2
E2E-X2ME@/F@
2
E2E-X2MY@
4
E2E-X8MD@(-US)
6
E2E-X5ME@/F@
6
E2E-X5MY@
E2E-X14MD@(-US)
11 E2E-X10ME@/F@
11 E2E-X10MY@
11
M30
E2E-X20MD@(-US)
13 E2E-X18ME@/F@
13 E2E-X18MY@
13
M8
E2E-X2D@-M1(G)
14 E2E-X1R5E/F@-M1
14
M12
E2E-X3D@-M1(G)
16 E2E-X2E/F@-M1
16 E2E-X2Y@-M1
18
M18
E2E-X7D@-M1(G)
20 E2E-X5E/F@-M1
20 E2E-X5Y@-M1
20
M30
E2E-X10D@-M1(G)
22 E2E-X10E/F@-M1
22 E2E-X10Y@-M1
22
M8
E2E-X4MD@-M1(G)
15 E2E-X2ME/F@-M1
15
M12
E2E-X8MD@-M1(G)
17 E2E-X5ME/F@-M1
17 E2E-X5MY@-M1
19
M18
E2E-X14MD@-M1(G)
21 E2E-X10ME/F@-M1
21 E2E-X10MY@-M1
21
23
M8
M18
M30
M8
M12
M18
M30
Shielded
---
10 E2E-X5Y@
Shielded
Pre-wired
Connector
Models
(no polarity)
AC/DC 2-Wire Models
Model
No.
E2E-X3T1
M12
Unshielded
AC 2-Wire Models
Model
No.
E2E-X3D@(-US)
M8
Pre-wired
Connector
Models
DC 3-Wire Models
Model
No.
M12
Shielded
Unshielded
No.
M8
M30
Connector
Models
(M8)
DC 2-Wire Models
Model
8
---
E2E-X20MD@-M1(G)
23 E2E-X18ME/F@-M1
23 E2E-X18MY@-M1
24 E2E-X1R5E/F@-M3
24
E2E-X4MD@-M3G
25 E2E-X2ME/F@-M3
25
E2E-X2D@-M1(T)GJ(-U)
E2E-X3D@-M1(T)GJ(-U)
E2E-X3D@-M1TGJ-US
E2E-X7D@-M1(T)GJ(-U)
E2E-X7D@-M1TGJ-US
E2E-X10D@-M1(T)GJ(-U)
E2E-X10D@-M1TGJ-US
E2E-X4MD@-M1TGJ-US
E2E-X8MD1-M1(T)GJ
E2E-X8MD@-M1TGJ-US
E2E-X14MD1-M1(T)GJ
E2E-X14MD@-M1TGJ-US
E2E-X20MD1-M1(T)GJ
E2E-X20MD@-M1TGJ-US
---
---
E2E-X2D@-M3G
E2E-X2D@-M1TGJ-US
---
---
---
---
---
---
---
---
---
---
---
---
---
26
27
28
29
30
31
32
33
M12
E2E-X3D1-M1J-T
27
M18
E2E-X7D@-M1J-T
28
M30
E2E-X10D@-M1J-T
29
Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models.
2. The model numbers of M8 to M30 Pre-wired Models are laser-marked on the milled section and cable section. This does not apply, however, to models that
end in -U.
27
E2E
Pre-wired Models (Shielded)
Pre-wired Models (Unshielded)
Diagram 1
Diagram 2
E2E-X2D@
E2E-X1R5E@/F@
30
7
30
15 dia.
15 dia.
26
13
3
8
E2E-X2MY@
40
13
8
7
36
15 dia.
3
*1
*1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
Robotics Cable Models:
4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate metal conduit).
*2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
Diagram 4
36
13
Indicators *2
Two clamping nuts
Toothed washer
M8 × 1
7
40
8
3
6.1 dia.
E2E-X1R5Y@
15 dia.
6
*1
*1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
Robotics Cable Models:
4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
Models with Highly Oil-resistant Cables:
4-dia. polyurethane-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator
diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate metal conduit).
*2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
Diagram 3
7
26
13
Indicators *2
Two clamping nuts
Toothed washer
M8 × 1
E2E-X4MD@
E2E-X2ME@/F@
6
8
3
6.1 dia.
*
Operation indicator (red)
Two clamping nuts
4-dia. vinyl-insulated round cable with 2 conductors
Toothed
(Conductor cross section: 0.3 mm2, Insulator
washer
diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate
metal conduit).
M8 × 1
Diagram 5
E2E-X3D@
E2E-X2E@/F@
38
33
21 dia.
17
Diagram 6
9
4
17
10
21 dia.
Indicators *2
Two clamping nuts
Toothed washer
*1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
Robotics Cable Models:
4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
The cable can be extended (separate metal conduit) up to 200 m for the control output and up to 100 m for
the diagnostic output.
*2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
Diagram 8
E2E-X5MY@
9
43
21 dia.
38
4
10
*1
E2E-X2Y@
43
9
M12 × 1
*1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m
Robotics Cable Models:
4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.27 mm), Standard length: 2 m
Models with Highly Oil-resistant Cables:
4-dia. polyurethane-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator
diameter: 1.3 mm), Standard length: 2 m
The cable can be extended (separate metal conduit) up to 200 m for the control output and up to 100 m for
the diagnostic output.
*2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
17
7
38
33
4
9 dia.
*1
Diagram 7
E2E-X8MD@
E2E-X5ME@/F@
21 dia.
Indicators * 2
Two clamping nuts
Toothed washer
M12 × 1
*
Operation indicator (red)
Two clamping nuts
2 conductors
Toothed 4-dia. vinyl-insulated round cable with
(Conductor cross section: 0.3 mm2, Insulator diameter:
washer
1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate
metal conduit).
M8 × 1
10
9
38
17
7
4
10
9 dia.
*
M12 × 1
*
Operation indicator (red)
Two clamping nuts
4-dia.
vinyl-insulated round cable with 2
Toothed
conductors (Conductor cross section: 0.3 mm2,
washer
Insulator diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate
metal conduit).
M12 × 1
Operation indicator (red)
Two clamping nuts
Toothed
4-dia. vinyl-insulated round cable with 2
conductors (Conductor cross section: 0.3 mm2,
washer
Insulator diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Mounting Hole Dimensions
Dimension
F (mm)
M8
8.5 +0.5
dia.
0
M12
12.5 +0.5
dia.
0
F
28
E2E
Pre-wired Models (Shielded)
Diagram 9
Pre-wired Models (Unshielded)
E2E-X3T1
60
21 dia.
9
55
17
4
10
---
*1
M12 × 1
Indicators *2
Two clamping nuts
*1 4-dia. vinyl-insulated round cable with 2
Toothed
conductors (Conductor cross section: 0.3 mm2,
washer
Insulator diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate
metal conduit).
*2 Operation indicator (red), Setting indicator (green)
Diagram 10 E2E-X7D@/E2E-X5E@/F@
E2E-X5Y@/E2E-X7T1
43
29 dia.
Diagram 11 E2E-X14MD@/E2E-X10ME@/F@
E2E-X10MY@
43
12
29 dia.
38
10
4
24
12
38
24
4
10
10
14.8 dia.
*1
Indicators *2
*1
Indicators *2
M18 × 1
Two clamping nuts
Toothed washer
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
Robotics Cable Models:
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm), Standard length: 2 m
Models with Highly Oil-resistant Cables:
6-dia. polyurethane-insulated round cable with 2 conductors (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
The cable can be extended (separate metal conduit) up to 200 m for the control output
and up to 100 m for the diagnostic output.
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
D2/E/F/Y Models: Operation indicator (red)
Diagram 12 E2E-X10D@/E2E-X10E@/F@
E2E-X10Y@/E2E-X10T1
48
43
42 dia.
36
5
*1
M18 × 1
Two clamping nuts
Toothed washer
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
Robotics Cable Models:
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm), Standard length: 2 m
The cable can be extended (separate metal conduit) up to 200 m for the control output
and up to 100 m for the diagnostic output.
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
D2/E/F/Y Models: Operation indicator (red)
Diagram 13 E2E-X20MD@/E2E-X18ME@/F@
E2E-X18MY@
12
48
10
12
43
42 dia.
13
36
5
10
26.8 dia.
*1
*1
Indicators *2
Indicators *2
M30 × 1.5
Two clamping nuts
Toothed washer
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
Robotics Cable Models:
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
Models with Highly Oil-resistant:
6-dia. polyurethane-insulated round cable with 2 conductors (Conductor
cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
The cable can be extended (separate metal conduit) up to 200 m for the
control output and up to 100 m for the diagnostic output.
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
D2/E/F/Y Models: Operation indicator (red)
M30 × 1.5
Two clamping nuts
Toothed washer
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
Robotics Cable Models:
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
The cable can be extended (separate metal conduit) up to 200 m for the
control output and up to 100 m for the diagnostic output.
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
D2/E/F/Y Models: Operation indicator (red)
Mounting Hole Dimensions
Dimension
F (mm)
M12
M18
M30
12.5 +00.5 dia. 18.5 +00.5 dia. 30.5 +00.5 dia.
F
29
E2E
M8 Connector Models
(Shielded)
M8 Connector Models
(Unshielded)
Diagram 24 E2E-X2D@-M3G/E2E-X1R5E@-M3/X1RF@-M3
Diagram 25 E2E-X4MD@-M3G/E2E-X2ME@-M3/X2MF@-M3
39
39
31
15 dia.
26
8
3
13
31
15 dia.
M8 × 1
26
6
13
Operation indicator (red),
Setting indicator (green)
D2/E/F Models: Operation indicator (red)
M8 × 1
8
3
* D Models:
M8 × 1
* D Models:
Operation indicator (red),
Setting indicator (green)
D2/E/F Models: Operation indicator (red)
6.1 dia.
Indicators*
Two clamping nuts
Toothed washer
M8 × 1
Indicators*
Two clamping nuts
Toothed washer
M12 Connector Models
(Shielded)
M12 Connector Models
(Unshielded)
Diagram 14 E2E-X2D@-M1(G)
E2E-X1R5E@-M1/E2E-X1R5F@-M1
Diagram 15 E2E-X4MD@-M1(G)
E2E-X2ME@-M1/E2E-X2MF@-M1
43
43
30
15 dia.
26
M12 × 1
8
3
13
30
15 dia.
26
M12 × 1
8
3
6
13
6.1 dia.
M8 × 1
Indicators*
Two clamping nuts
Toothed washer
Indicators*
Two clamping nuts
Toothed washer
M8 × 1
* D1 Models:
Operation indicator (red),
Setting indicator (green)
D2/E/F Models: Operation indicator (red)
Diagram 16 E2E-X3D@-M1(G)
E2E-X2E@-M1/E2E-X2F@-M1
* D1 Models:
Operation indicator (red),
Setting indicator (green)
D2/E/F Models: Operation indicator (red)
Diagram 17 E2E-X8MD@-M1(G)
E2E-X5ME@-M1/E2E-X5MF@-M1
48
21 dia.
48
21 dia.
33
4
17
10
M12 × 1
33
7
17
M12 × 1
10
4
9 dia.
Indicators *
Two clamping nuts
Toothed washer
M12 × 1
* D1 Models:
Operation indicator (red),
Setting indicator (green)
D2/E/F Models: Operation indicator (red)
Diagram 18 E2E-X2Y@-M1
Indicators*
Two clamping nuts
Toothed washer
M12 × 1
* D1 Models:
Operation indicator (red), Setting indicator (green)
D2/E/F Models:
Operation indicator (red)
Diagram 19 E2E-X5MY@-M1
53
53
21 dia.
21 dia.
38
4
17
10
M12 × 1
38
7
17
4
10
M12 × 1
9 dia.
M12 × 1
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 × 1
Operation indicator (red)
Two clamping nuts
Toothed washer
30
E2E
Diagram 20 E2E-X7D@-M1(G)/E2E-X5E@-M1/X5F@-M1
E2E-X5Y@-M1
53
29 dia.
Diagram 21 E2E-X14MD@-M1(G)/E2E-X10ME@-M1
X10MF@-M1
E2E-X10MY@-M1
53
38
4
24
38
29 dia.
10
M12 × 1
10
24
10
4
M12 × 1
14.8 dia.
Indicators*
M18 × 1
* D1 Models:
Two clamping nuts
Toothed washer
Operation indicator (red), Setting indicator (green)
D2/E/Y Models:
Operation indicator (red)
Diagram 22 E2E-X10D@-M1(G)/E2E-X10E@-M1/X10F@-M1
E2E-X10Y@-M1
58
42 dia.
5
Two clamping nuts
Toothed washer
* D1 Models:
Operation indicator (red), Setting indicator (green)
D2/E/Y Models: Operation indicator (red)
Diagram 23 E2E-X20MD@-M1(G)/E2E-X18ME@-M1/
X18MF@-M1
E2E-X18MY@-M1
58
43
36
Indicators*
M18 × 1
42 dia.
10
43
13
36
5
10
26.8 dia.
M12 × 1
Indicators*
M30 × 1.5
M12 × 1
Indicators*
Two clamping nuts
M30 × 1.5
Toothed washer
* D1 Models: Operation indicator (red), Setting indicator (green)
D2/E/Y Models: Operation indicator (red)
Two clamping nuts
Toothed washer
* D1 Models:
Operation indicator (red), Setting indicator (green)
D2/E/Y Models:
Operation indicator (red)
Mounting Hole Dimensions
Dimensions
F (mm)
M8
M12
M18
M30
8.5 +00.5 dia. 12.5 +00.5 dia. 18.5 +00.5 dia. 30.5 +00.5 dia.
F
31
E2E
Pre-wired Connector Models (Shielded)
Diagram 26 E2E-X2D@-M1TGJ-U *3
E2E-X2D1-M1TGJ
E2E-X2D@-M1TGJ-US
30
15 dia.
7
26
8
13
3
*1
Indicators *2
M12 × 1
Two clamping nuts
*1. No U suffix: 4-dia. Vinyl-insulated round cable
Toothed washer
M8 × 1
U suffix: 4-dia. Polyurethane insulated round cable,
Standard length: 300 mm
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
Diagram 27 E2E-X3D@-M1GJ
E2E-X3D1-M1J-T
E2E-X3D@-M1TGJ-U *3
E2E-X3D1-M1TGJ
E2E-X3D@-M1TGJ-US
38
21 dia.
9
33
10
4
17
*1
Indicators *2
M12 × 1
Two clamping nuts *1. No U suffix: 4-dia. Vinyl-insulated round cable
U suffix: 4-dia. Polyurethane insulated round cable,
Toothed washer
M12 × 1
Standard length: 300 mm
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
Diagram 28 E2E-X7D@-M1GJ
E2E-X7D@-M1J-T
E2E-X7D@-M1TGJ-U *3
E2E-X7D1-M1TGJ
E2E-X7D@-M1TGJ-US
43
29 dia.
12
38
10
4
24
*1
M12 × 1
Indicators *2
Two clamping nuts *1. No U suffix: 6-dia. Vinyl-insulated round cable
U suffix: 6-dia. Polyurethane insulated round cable,
Toothed washer
Standard length: 300 mm
M18 × 1
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
Diagram 29 E2E-X10D@-M1GJ
E2E-X10D@-M1J-T
E2E-X10D@-M1TGJ-U *3
E2E-X10D1-M1TGJ
E2E-X10D@-M1TGJ-US
48
42 dia.
12
43
36
5
10
*1
Indicators *2
M30 × 1.5
Two clamping nuts
Toothed washer
M12 × 1
*1. No U suffix: 6-dia. Vinyl-insulated round cable
U suffix: 6-dia. Polyurethane insulated round cable,
Standard length: 300 mm
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
32
E2E
Pre-wired Connector Models (Unshielded)
Diagram 30 E2E-X4MD@-M1TGJ-US
30
15 dia.
7
26
13
6
8
3
6.1 dia.
*1
Indicators *2
Two clamping nuts
Toothed washer
M8 × 1
Diagram 31 E2E-X8MD1-M1GJ
E2E-X8MD1-M1TGJ
E2E-X8MD@-M1TGJ-US
38
21 dia.
M12×1
*1. 4-dia. vinyl-insulated round cable
Standard length: 300 mm
*2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
9
33
10
4
7
17
9 dia.
*1
Indicators *2
Two clamping nuts
Toothed washer
M12 × 1
Diagram 32 E2E-X14MD@-M1GJ
E2E-X14MD1-M1TGJ
E2E-X14MD@-M1TGJ-US
43
M12 × 1
*1. 4-dia. vinyl-insulated round cable,
Standard length: 300 mm
*2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
12
38
29 dia.
10
4
10
24
14.8 dia.
*1
M18 × 1
Diagram 33 E2E-X20MD1-M1GJ
E2E-X20MD1-M1TGJ
E2E-X20MD@-M1TGJ-US
Two clamping nuts
Toothed washer
48
42 dia.
M12 × 1
Indicators*2
*1. 6-dia. vinyl-insulated round cable, Standard
length: 300 mm
*2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
12
43
13
36
5
10
26.8 dia.
*1
M12 × 1
Indicators*2
M30 × 1.5
Two clamping nuts
Toothed washer
*1. 6-dia. vinyl-insulated round cable,
Standard length: 300 mm
*2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
Mounting Hole Dimensions
Dimension
F (mm)
M8
M12
M18
M30
8.5 +00.5 dia. 12.5 +00.5 dia. 18.5 +00.5 dia. 30.5 +00.5 dia.
F
33
E2E
Dimensions for Proximity Sensors with Sensor I/O Connectors
Shielded Models
Straight Connectors
Unshielded Models
Straight Connectors
L1
L-shape Connectors
L1
L-shape Connectors
Dimensions with the XS2F/XS5F Connected
Dimension
Sensor diameter
M8
DC
M12*
AC
M18
M30
(Unit: mm)
L1
L2
Approx. 75
Approx. 80
Approx. 85
Approx. 85
Approx. 90
Approx. 62
Approx. 67
Approx. 72
Approx. 72
Approx. 77
* The overall length of the Sensor is different between AC and DC Models for
Sensors with diameters of M12. This will change the dimension when the I/
O Connector is connected.
Dimensions with the XS3F Connected (Unit: mm)
L2
L2
Dimension
Sensor diameter
M8
L1
L2
Approx. 65
Approx. 54
Accessories (Order Separately)
Sensor I/O Connectors
Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.
Mounting Brackets
Protective Covers
Sputter Protective Covers
Refer to Y92@ for details.
34
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2015.9
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2015 All Right Reserved.
Similar pages