ABB internal training schedule

ABB University, Bejing Drive Training Center
Drives courses
Internal course schedule 2016
Welcome to enhance your technical competence in Beijing Drive
Training Center!
We offer ABB employee and service partner handson training for ABB low voltage drives, and medium
voltage drives on programming and configuration,
commissioning, maintenance and preventive
maintenance as well as fault tracing. The course
schedule is presented on the right. Also, ask for other
courses – we are happy to make an offer on them
according to Your needs.
course. Your place on a course can always be transferred to
another person in your company or department. You may
cancel the course until:
Scheduled courses
– less than 3 days before the course start: full course
price will be charged.
Enrollments
You are able enroll for the courses via our web pages or
contact us by email or phone (see contact information on
the last page). Please enroll as early as possible since the
number of participants per course is limited. We accept the
enrollments in the order in which they arrive. An enrollment
announcement confirms that we have reserved a place for
you. We will inform you by email or phone if there are no
vacant places for the applied course. Please note that some
courses may have prerequisites (other hands-on courses
and/or e-learning). You are able to check this in the course
description in the Course Locator.
Confirmation and course program
Confirmation of the acceptance to the course and the
course information will be sent approx. two weeks before
the start of the course, including the course program and
the course times. The courses normally run at 9.00 - 17.00.
Coffee and lunch are included in the course fee. A course
may be cancelled due to low enrollment, which is less than 6
enrollments for LV courses and 4 for MV courses.
E-learning
Many of our classroom courses have the theory based
e-learning course to be studied independently before the
classroom course. In case the course has the e-learning
course as a pre-study, the e-learning access will be sent to
the participants after the course enrollment announcement.
Cancellation
In case of the cancellation, please inform us as soon as
possible. This will allow another applicant to attend the
– more than 10 days before the course start: at no charge
– 10 to 4 days before the course start: half of the course
price will be charged
Please note that a participant who fails to show up for a course
without notice to the Training Center is invoiced the full course
fee.
Course prices
Please refer to the page on the right side for the detailed
course prices.
The training courses will be delivered in English(EN) or Chinese
(CN)language. The detailed price please refer to the page on
the right side.
If courses delivered onsite are in need, the traveling expenses
of our trainers should be included separately in the course
prices.
E-learning courses have a separate charge/person. E-learning
courses are free of charge for ABB and partners.
On-request courses
An on-request course is a training course that is arranged to
a group/groups of employees of an organization in the Beijing
Training Center facilities or on-site. The on-request course
selection covers the list on the right. Moreover, the scheduled
courses can be arranged to an organization-specific group.
The price of an on-request course is always offered separately.
Reservations
We reserve the right to change course schedules, programs
and contents. A scheduled course may be cancelled due
to low enrollment. The maximum number of students varies
between 6-8 persons depending on the type of the course.
Scheduled courses in 2016
Code
Course name
Price(RMB)
Duration
(Days)
EN
CN
Course starting date (MM.DD)
EN
CN
Low voltage AC drive
G190
ACSM1 Machinery drive, startup,maintenance and service hands-on
2
3200
1600
G107
Fieldbus communication basic for ABB drive
3
4800
2400
3.14
5.30
8.25
G165
ACS550 Standard drive startup,maintenance and service hands-on
2
3200
1600
2.29
5.09
6.02
8.01
10.10 12.05
G152
ACS800 Single drive startup, maintenance and service hands-on
3
4800
2400
3.02
5.11
6.06
8.03
10.12 12.07
G160
ACS800 Multi drive startup,maintenance and service hands-on
3
4800
2400
3.07
5.16
6.13
8.08
10.17 12.12
G650
ACS850 startup, maintenance and service hands-on
2
3200
1600
3.24
G005
ABB Energy Appriaisal hands-on(*)
1
1600
800
G380
ACS880 Operation, startup and basic maintenance hands-on
G381
ACS880 Software features hands-on
G384
ACS880-04/07 Operation,startup and basic maintenance hands-on
3
4800
2400
G3851
ACS880 Functional safety configuration with FSO-12
G383
ACS880 and ACS580 advanced service for single drives(*)
1
1600
G3832
ACS880 Advanced service for ACSM1,ACS850,ACQ810,ACS88004,R10&R11 (*)
1
1600
G3880
ACS880 Multidrive w/o ACS880 basic, hands-on
3
G3831
ACS880 advanced service for -07/multi supply and inverter modules(*)
1
G390
ACS580-01/04 Basic hands-on
G393
ACS580-01/04 Basic service hands-on
6.20
6.30
5.19
on
request
10.24
12.29
8.11
12.15
3.16
5.25
6.22
8.17
10.26 12.21
800
3.21
5.30
6.27
8.22
10.31 12.26
800
3.22
5.31
6.28
8.23
11.01 12.27
4800
2400
3.21
5.30
6.27
8.22
10.31 12.26
1600
800
3.24
6.02
6.3
8.25
11.03 12.29
2
3200
1600
3.14
5.23
6.20
8.15
10.24 12.19
3.10
5.19
6.16
8.11
10.20 12.15
3.21
5.30
6.27
8.22
10.31 12.26
DC drive
G581
DCS550 Startup,maintenance and service hand-on
2
3200
1600
G560
DCS800 Startup,maintenance and service hand-on
3
4800
2400
on
request
Medium voltage AC drive
G710
ACS1000 MV drive Service and commissioning
4
14000
7000
G740
ACS5000 MV drive Service and commissioning
5
14000
7000
G760
ACS6000 MV drive Service and commissioning
5
14000
7000
G780
ACS2000 MV drive Service and commissioning
5
10000
5000
G830
MEGADRIVE LCI(with AC800PEC) Service and commissioning
4
14000
7000
3.07
G891
ACS580 MV drive Service and commissioning
4
10000
5000
3.28
On-request courses
2.29
6.06
10.10
6.13
on
request
3.14
10.17 12.12
5.09
8.01
5.23
8.15
12.26
8.22
12.19
6.27
10.31
E-learning course
Low voltage AC drive
Code
G191
ACSM1 Machinery drive, Motion
control, hands on
Low voltage AC drive
G192
ACSM1 Machinery drive, Solution
Program Composer, hands on
1
G156
ACS800-07 Startup,maintenance and
service hand-on
3
4800
G163
ACS800LC Startup,maintenance and
service hand-on
2
G164
ACS800-77LC Startup,maintenance
and service hand-on
G167
2
3200
1600
Course name
G055e
ACS55 Fundamentals, Internal Course - CN
G351e
ACS150 Component Drive Fundamentals, Internal Course - CN
G310e
ACS310 Standard Drive Fundamentals, Internal Course - CN
2400
G356e
3200
1600
G165e
ACS355 General Machinery Drive Fundamentals,Internal Course
- CN
ACS550 Fundamentals, Internal Course - CN
G152e
ACS800 Single Drive Fundamentals, Internal Course - CN
3
4800
2400
G156e
ACS800-67 Startup,maintenance and
service hand-on
5
8000
4000
G159e
G185
ACS800-87LC Startup,maintenance
and service hand-on
3
4800
2400
G160e
ACS800 Single Cabinet Built Drive Fundamentals, Internal
Course - CN
ACS800-304/704+V992(New DSU) Update Course, Internal
Course - CN
ACS800 Multidrive Fundamentals, Internal Course - CN
G650e
ACS850 Industrial Drive Fundamentals, Internal Course - CN
G188
ACS880-87LC Startup,maintenance
and service hand-on
3
4800
2400
G190e
ACSM1 Product Specification
G3801e
ACS880-01 Installation and Startup, Internal Course - CN
G3900e
General purpose drives, ACS580 series - CN
G3852 ACS880 Encoder safety functions
with FSO and FSE
G386
ACS880 Application
programming(IEC61131) hands-on
G3881 ACS880 Multidrive with ACS880
basic, hands-on
1
1600
1600
800
800
2
3200
1600
3
4800
2400
The course marked with (*) is only vaild for engineer from ABB DM division or
certified service partner of ABB Beijing Drive System Co,Ltd. .
Note: You can find more courses in the Course Locator or you can contact our
training center. Not all the courses are listed here.
DC voltage drive
G581e
DCS550 Basic Training, Internal Course - CN
G582e
DCS550 Winder Application, Internal Course - CN
G560e
DCS800 Basic Training (D1-D4), Internal Course - CN
G569e
DCS800 Basic Training (D5-D7), Internal Course - CN
Contact us
Further information on the course schedules and
offering
ABB University China
Beijing Drive Training Center
Internet
http://www.abb.com/abbuniversity
Mailing address:
No.401,A-10 Jiuxianqiao Beilu Chaoyang District
Beijing,China
ABB Beijing Drive Systems Co.,Ltd
100015
You can find our local sites by choosing:
Your preferences (in the right column): China/English >
AC/DC Products Training
General information on trainings, instructions how to contact
Beijing Training Center can also be found on our Internet
page.
The Course Locator
http://inside.abb.com/AbbUniversity/Courses.aspx
The Course Locator can be found on Beijing Training Center
websites. In the right column, you can see: Our offerings >
Course Locator
In the Course Locator, you will find all ABB course offerings
globally. You can use the Course Locator to find course
schedules, course descriptions and agendas; you can also
enroll on the courses via the Course Locator.
To search Drives courses in China, please select at least the
following criteria in the Course Locator:
Product group/Industry: Drives
Country: China
Contact information:
+86 10 58217351/58217669
Email: [email protected]
Internet
websites. In the right column, you can see: Our offerings >
www.abb.com/abbuniversity
Similar pages