PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC481ST89 / 481ST89E
v02.0710
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Typical Applications
Features
The HMC481ST89 / HMC481ST89E is an ideal RF/IF
gain block & LO or PA driver for:
P1dB Output Power: +19 dBm
• Cellular / PCS / 3G
Output IP3: +33 dBm
• Fixed Wireless & WLAN
Cascadable 50 Ohm I/Os
• CATV, Cable Modem & DBS
Single Supply: +6V to +12V
• Microwave Radio & Test Equipment
Industry Standard SOT89 Package
Gain: 20 dB
Included in the HMC-DK001 Designer’s Kits
Functional Diagram
General Description
The HMC481ST89 & HMC481ST89E are SiGe
Heterojunction Bipolar Transistor (HBT) Gain Block
MMIC SMT amplifiers covering DC to 5 GHz. Packaged in an industry standard SOT89, the amplifier
can be used as a cascadable 50 Ohm RF/IF gain
stage as well as a LO or PA driver with up to +21 dBm
output power. The HMC481ST89(E) offer 20 dB of
gain with a +33 dBm output IP3 at 1 GHz while
requiring only 79 mA from a single positive supply.
The Darlington feedback pair used results in reduced
sensitivity to normal process variations and excellent
gain stability over temperature while requiring a
minimal number of external bias components.
Electrical Specifi cations, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25° C
Parameter
Gain
Gain Variation Over Temperature
Input Return Loss
Output Return Loss
Reverse Isolation
Output Power for 1 dB Compression (P1dB)
Output Third Order Intercept (IP3)
(Pout= 0 dBm per tone, 1 MHz spacing)
Noise Figure
Supply Current (Icq)
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
DC - 5 GHz
Min.
Typ.
18
15.5
13
11
9
20
17.5
15
13
11
0.008
12
15
17
27
23
18
19
18
16
14
12
33
30
27
25
3.5
4.0
79
DC - 1.0 GHz
1.0 - 5.0 GHz
DC - 1.0 GHz
1.0 - 4.0 GHz
4.0 - 5.0 GHz
DC - 5 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
0.5 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
DC - 4 GHz
4.0 - 5.0 GHz
16
15
13
11
9
Max.
0.016
Units
dB
dB
dB
dB
dB
dB/ °C
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dB
dB
mA
Note: Data taken with broadband bias tee on device output.
8 - 134
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC481ST89 / 481ST89E
v02.0710
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Gain vs. Temperature
20
S21
S11
S22
16
12
+25C
+85C
-40C
8
4
0
0
1
2
3
4
5
6
7
0
8
1
Input Return Loss vs. Temperature
4
5
6
0
+25C
+85C
-40C
-5
RETURN LOSS (dB)
INPUT RETURN LOSS (dB)
3
Output Return Loss vs. Temperature
0
-10
-15
-20
+25C
+85C
-40C
-10
-20
-30
-40
-25
0
1
2
3
4
5
0
6
1
2
3
4
5
6
5
6
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
Noise Figure vs. Temperature
0
10
-5
+25C
+85C
-40C
8
NOISE FIGURE (dB)
REVERSE ISOLATION (dB)
2
FREQUENCY (GHz)
FREQUENCY (GHz)
+25C
+85C
-40C
-10
-15
-20
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
24
25
20
15
10
5
0
-5
-10
-15
-20
-25
-30
-35
-40
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
6
4
2
-25
0
-30
0
1
2
3
4
FREQUENCY (GHz)
5
6
0
1
2
3
4
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8 - 135
HMC481ST89 / 481ST89E
v02.0710
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
P1dB vs. Temperature
20
20
Psat (dBm)
P1dB (dBm)
24
16
12
+25C
+85C
-40C
8
16
12
+25C
+85C
-40C
8
4
4
0
1
2
3
4
5
6
0
1
2
FREQUENCY (GHz)
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
33
30
27
+25C
+85C
-40C
21
18
0
1
2
3
4
5
6
Gain, Power & OIP3 vs. Supply Voltage
for Constant Icc= 79 mA @ 850 MHz
36
24
3
FREQUENCY (GHz)
Output IP3 vs. Temperature
IP3 (dBm)
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
Psat vs. Temperature
24
4
5
6
36
30
24
18
Gain
P1dB
Psat
IP3
12
6
0
6
7
8
9
10
11
12
Vs (Vdc)
FREQUENCY (GHz)
Vcc vs. Icc Over Temperature for
Fixed Vs= 8V, RBIAS= 39 Ohms
88
+85 C
86
84
Icc (mA)
82
+25 C
80
78
76
74
72
-40 C
70
68
66
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
Vcc (Vdc)
8 - 136
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC481ST89 / 481ST89E
v02.0710
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Absolute Maximum Ratings
+6.0 Vdc
RF Input Power (RFIN)(Vcc = +5 Vdc)
+10 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 16.3 mW/°C above 85 °C)
1.06 W
Thermal Resistance
(junction to lead)
61.4 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
8
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
Collector Bias Voltage (Vcc)
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC481ST89
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC481ST89E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H481
XXXX
[2]
H481
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8 - 137
HMC481ST89 / 481ST89E
v02.0710
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Pin Descriptions
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
Pin Number
Function
Description
Interface Schematic
1
RFIN
This pin is DC coupled.
An off chip DC blocking capacitor is required.
3
RFOUT
RF output and DC Bias (Vcc) for the output stage.
2, 4
GND
These pins and package bottom must be connected to RF/
DC ground.
Application Circuit
Recommended Bias Resistor Values
for Icc= 79 mA, Rbias= (Vs - Vcc) / Icc
Supply Voltage (Vs)
6V
8V
10V
12V
RBIAS VALUE
11 Ω
39 Ω
62 Ω
91 Ω
RBIAS POWER RATING
1/8 W
1/4 W
1/2 W
1W
Note:
1. External blocking capacitors are required on
RFIN and RFOUT.
2. RBIAS provides DC bias stability over temperature.
Recommended Component Values for Key Application Frequencies
Frequency (MHz)
Component
8 - 138
50
900
1900
2200
2400
3500
5000
L1
270 nH
56 nH
18 nH
18 nH
15 nH
8.2 nH
6.8 nH
C1, C2
0.01 μF
100 pF
100 pF
100 pF
100 pF
100 pF
100 pF
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC481ST89 / 481ST89E
v02.0710
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Evaluation PCB
List of Materials for Evaluation PCB 108324 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J4
DC Pin
C1, C2
Capacitor, 0402 Pkg.
C3
100 pF Capacitor, 0402 Pkg.
C4
1000 pF Capacitor, 0603 Pkg.
C5
2.2 μF Capacitor, Tantalum
R1
Resistor, 1210 Pkg.
L1
Inductor, 0603 Pkg.
U1
HMC481ST89 / HMC481ST89E
PCB [2]
107368 Evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8 - 139