1303252 Si101x Rev C Change Notice std

Process Change Notice #1303252
____________________________________________________________________________________________________
User Registration
Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document
updates, new product announcements, “how-to” and design documents, product change notices (PCN) and other valuable content
available only to registered users. http://www.silabs.com/profile
PCN Date: 3/25/2013
Effective Date: 6/28/2013
Title: Si101x Rev C-GM2
Originator: Matt Maupin
Phone: 512 464 9338
Dept: Marketing
Customer Contact: Kathy Hagger
Phone: 512 532 5261
Dept: Sales
PCN Type:
Datasheet
Foundry
Packing
Product Revision
Assembly
Labeling
Discontinuance
Test
Other
Last Order Date: Not Applicable.
PCN Details
Description of Change:
Silicon Labs is pleased to announce revision C of Si101x devices and version 1.2 of the corresponding
datasheet for these products.
Si101x Revision C devices are assembled in LGA-42 packages and are not available in QFN-42
packages used on Revision A. The LGA-42 package does not change the pin ordering or orientation
of Si101x, but requires changes to the PCB landing pattern and soldering stencil. These changes are
outlined in the newly released datasheet.
The Si101x Revision C devices will be available for customer ordering upon the PCN Effective Date.
Reason for Change:
Revision C of the Si101x allows customers to exceed the maximum VBAT ramp time, if desired,
during external reset on the device. The LGA-42 package improves PCB solderability of the device.
The datasheet includes updates to Table 4.4 Reset Electrical Characteristics for additional
clarification on VBAT ramp time under different operating modes along with other minor edits.
Impact on Form, Fit, Function, Quality, Reliability:
There is no change to function, quality or reliability of these devices. The changes to form and fit
are limited to the change in package to LGA-42 from QFN-42 (as described above).
W7206F1 Process Change Notice Form rev AH
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 1
Process Change Notice #1303252
____________________________________________________________________________________________________
Product Identification:
Current P/N
Si1010-A-GM
Si1011-A-GM
Si1012-A-GM
Si1013-A-GM
Si1014-A-GM
Si1015-A-GM
New P/N
Si1010-C-GM2
Si1011-C-GM2
Si1012-C-GM2
Si1013-C-GM2
Si1014-C-GM2
Si1015-C-GM2
Note: The table above includes tape and reel variants which are denoted with an “R” at the end of
the orderable part number.
Last Date of Unchanged Product: 6/28/2013
Qualification Samples:
Qualification samples are available upon request. Please see your Silicon Labs sales representative
to order samples. A list of Silicon Labs sales representatives is available at www.silabs.com.
Customer Early Acceptance Sign Off:
Customers may approve early PCN acceptance by completing the information below:
Early Acceptance:
Date:
Name:
Company:
Email your early Acceptance approval to: [email protected]
Qualification Data:
Qualification data for the new part numbers is available upon request. Please see your Silicon Labs
sales representative if you have questions. A list of Silicon Labs sales representatives is available at
www.silabs.com.
W7206F1 Process Change Notice Form rev AH
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 2
Similar pages