REV DESCRIPTION RDG .580 14.73 CWB 09/61/05 A RELEASED PER ECR8681 2X .300 7.62 BY APPD DATE .570±.010 14.48±.25 4 .484 12.29 .035 .89 .450 11.43 4 .236 5.99 2.634 66.90 June 2006 - This drawing became the property of Winchester Electronics Corporation, Wallingford, CT. 2.406 61.11 2X 1.203 .120 3.05 2.077 52.76 2X .810 A 30.56 20.57 .435 11.05 .606 15.39 .120 3.05 2X .078 1.98 .450 11.43 2X 4 2X .098 2.49 .004 [0.10] NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD10-0000. 2. MATERIAL & FINISH SPECIFICATIONS: SHELLS: COLD ROLLED STEEL PER ASTM A568 FINISH: BLUE BRIGHT TRIVALENT CHROMIUM OVER ZINC PER ASTM B633. INSULATORS: HIGH TEMPERATURE THERMOPLASTIC BRACKETS: COLD ROLLED STEEL PER ASTM A568 FINISH: BLUE BRIGHT TRIVALENT CHROMIUM OVER ZINC PER ASTM B633. GUIDE BUSHING: BRASS PER ASTM B16 FINISH: BLUE BRIGHT TRIVALENT CHROMIUM OVER ZINC PER ASTM B633 SNAP IN BOARD LOCKS: COPPER ALLOY FINISH: PURE TIN OVER NICKEL 3. FOR POWER CONTACT SPECIFICATIONS SEE CONTACT SALES DRAWINGS SD222-010-00415G & SD222-010-00416G. 4 FROM REAR OF D-=SUB FLANGE. .120 3.05 .004 [0.10] M M A A RECOMENDED PCB LAYOUT VIEWED FROM COMPONENT SIDE OF P.C.B. PCB THICKNESS .063 [1.6] PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX ± .01 [0.3] .XXX ± ..005 [0.13] .XXXX ± .XXXX ANGLES: ± 2° SCALE: 1:1 CUSTOMER DRAWING DRAWN CWB APPROVED RBG DATE APPROVED 09/01/05 WPM DATE APPROVED 09/06/05 JC DATE 09/06/05 DATE 09/06/05 NORTHROP GRUMMAN Winchester Electronics 62 Barnes Industrial Road North Wallingford, CT 06492 RIGHT ANGLE 34W2P-D-SUB RoHS COMPLIANT A SDRM34W2P-1010 SHT 1 OF 1 REV A