HMC204MS8G Data Sheet PDF

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC204MS8G / 204MS8GE
v05.0607
FREQ. MULTIPLIERS - PASSIVE - SMT
7
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
Typical Applications
Features
The HMC204MS8G / HMC204MS8GE is suitable for:
Conversion Loss: 17 dB
• Wireless Local Loop
Fo, 3Fo, 4Fo Isolation: 42 dB
• LMDS, VSAT, and Point-to-Point Radios
Passive: No Bias Required
• UNII & HiperLAN
Ultra Small Package: MSOP8
• Test Equipment
Functional Diagram
General Description
The HMC204MS8G & HMC204MS8GE are passive
miniature frequency doublers in 8 lead MSOP surface
mount packages. Suppression of undesired fundamental and higher order harmonics is 42 dB typical
with respect to input signal level. The doubler utilizes
the same GaAs Schottky diode/balun technology
found in Hittite MMIC mixers. It requires no DC bias
and adds no measurable phase noise onto the multiplied signal.
Electrical Specifi cations, TA = +25° C, As a Function of Drive Level
Input = +10 dBm
Parameter
Min.
Frequency Range, Input
Frequency Range, Output
Conversion Loss
7 - 30
Typ.
Input = +12 dBm
Max.
Min.
Typ.
Input = +15 dBm
Max.
Min.
Typ.
5.5 - 7.5
5.0 - 8.0
4.0 - 8.0
11.0 - 15.0
10.0 - 16.0
8.0 - 16.0
17
21
17
22
17
Max.
Units
GHz
GHz
21
dB
FO Isolation
(with respect to input level)
37
42
37
42
39
45
dB
3FO Isolation
(with respect to input level)
37
45
37
45
35
45
dB
4FO Isolation
(with respect to input level)
45
55
40
50
35
45
dB
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC204MS8G / 204MS8GE
v05.0607
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
Conversion Gain
@ +25° vs. Drive Level
7
0
CONVERSION GAIN (dB)
CONVERSION GAIN (dB)
0
-10
-20
+25 C
+85 C
-40 C
-30
-40
-10
-20
+ 8 dBm
+10 dBm
+12 dBm
+15 dBm
-30
-40
3
4
5
6
7
8
9
3
4
5
INPUT FREQUENCY (GHz)
6
Isolation @ +15 dBm Drive Level*
8
9
Input Return Loss vs. Drive Level
0
0
RETURN LOSS (dB)
-20
ISOLATION (dB)
7
INPUT FREQUENCY (GHz)
-40
-60
Fo
3Fo
4Fo
-80
+ 14 dBm
+ 12 dBm
+ 10 dBm
+ 8 dBm
-5
-10
-15
-20
-100
0
5
10
15
20
25
30
4
35
5
FREQUENCY (GHz)
6
7
FREQUENCY (GHz)
*With respect to input level
8
FREQ. MULTIPLIERS - PASSIVE - SMT
Conversion Gain vs.
Temperature @ +15 dBm Drive Level
Output Return Loss
0
RETURN LOSS (dB)
-4
-8
-12
-16
-20
8
10
12
14
16
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 31
HMC204MS8G / 204MS8GE
v05.0607
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
Absolute Maximum Ratings
FREQ. MULTIPLIERS - PASSIVE - SMT
7
Input Drive
+27 dBm
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC204MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC204MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H204
XXXX
[2]
H204
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
7 - 32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC204MS8G / 204MS8GE
v05.0607
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
Evaluation PCB
FREQ. MULTIPLIERS - PASSIVE - SMT
7
List of Materials for Evaluation PCB 103313 [1]
Item
Description
J1, J2
PCB Mount SMA Connector
U1
HMC204MS8G / HMC204MS8GE
PCB [2]
103311 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and exposed ground paddle should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 33