Download

Lighted Pushbutton Switch (Square)
A3P
CSM_A3P_DS_E_7_2
Large Square-bodied Lighted
Pushbutton Switches
• Excellent operating sensitivity.
• Excellent illumination with even surface brightness.
• Three-color models (green, orange, red; chameleon lighting)
included in lineup.
Refer to Safety Precautions for All Pushbutton Switches/
Indicators and Safety Precautions on page 24.
List of Models
Model
Appearance
52 max.
6.7
A3PJ
(Rectangular)
25
32
52 max.
6.7
A3PA
(Square)
25
25
6.4
52 max.
A3PT
(Round)
32 dia.
Note: The A3PJ is shown in the figure above as an example.
■ Specifications: Refer to page 15. ■ Panel cutout: Refer to page 21. ■ Dimensions: Refer to page 18.
■ Accessories, replacements, and tools: Refer to pages 13 to 15. ■ Precautions for correct use: Refer to page 24.
1
A3P
Model Number Structure
Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Pushbutton,
Lamp, and Switch.
For information on combinations, refer to Ordering Information on pages 3 to 7.
(5)
(6)
24E R
(1)
(2) (3) (4)
............... Single screen
Upper Lower
A 3 P J - 90 B 1 1 -
24E RW
................... Horizontal 2-split screen
R (Red)
Upper
W (White) Lower
(1) Shape of
Pushbutton
Symbol
Shape
Rectangular
Square
Round
(2) Switch
Specifications
Standard Load
(3) Screen Pattern
Illumination-only models
Symbol
Screen pattern
Symbol
Operation
Momentary
A
SPDT
A
B
Alternate
T
Momentary
C
DPDT
Momentary operaD
Alternate
tion: Self-resetting
Alternate opera- Microload
tion: Self-holding
Symbol
Operation
Momentary
E
SPDT
F
Alternate
G
Momentary
DPDT
H
Alternate
J
(4) Case Color (5) Lighting
(6) Color of Pushbutton
Method
For LED
SymColor
bol
LED-lighted Models Symbol Color
1
Black
(A3PJ and A3PA
R
Red
Light
Models Only)
O
orange
2
Single screen
1
gray
2-split screen
2
Symbol
Note: A3PT
models are
available in
light gray
only.
05E
12E
24E
Chameleon *1
G
• Standard Load
250 VAC, 3 A
30 VDC, 3 A
• Microload
125 VAC, 0.1 A
30 VDC, 0.1 A
LED Lamplighted Models
(A3PT Only)
Note: 1. The chameleon screen pattern
is not available with A3PT models.
2. The chameleon screen pattern
is only available with 12 or 24-VDC
models.
Symbol
*1. With chameleon models, the whole
screen lights red, green, or orange.
When not lit, the display is white.
• The available rectangular models are
shown below. Select from among the
individual products shown on page 10.
Minimum applicable load
5 VDC, 1 mA
Vertical 2-split
screen models
• 3PDT models are also
available.
Select from among the
individual products shown on
page 12.
05C
12C
24C
Incandescent
Lamp-lighted
Models
Horizontal 3-split Vertical 3-split
screen models screen models
The above diagrams show the Switches
with the "
" mark facing down.
Symbol
06
14
28
Colored-illumination models up
to the 4-split screen models are
available as individual Units.
Refer to page 8.
“Colored-illumination” models
operate in the way shown below:
Unlit
Lit
Color
Rated
voltage
5 VDC
12 VDC
24 VDC
• A3PJ and A3PA
can also be
ordered
separately. Refer
to page 10 for
details.
4-split screen
models
White
Rated
voltage
5 VDC
12 VDC
24 VDC
G
W
K
green
white
Chameleon
• The chameleon
screen pattern is not
available with A3PT
models.
• The chameleon
screen pattern is only
available with 12 or
24-VDC models.
For Incandescent
Lamp
Symbol
No
symbol
Color
Red,
orange,
white,
blue,
green
• Includes colored
plate. Refer to page
11 for details.
Rated
voltage
6 VAC/VDC
14 VAC/VDC
28 VAC/VDC
The built-in LED
is colored.
Number of LED Lamps
Screen pattern
Single screen
Horizontal 2-split screen
Number of Incandescent Lamps
A3PJ
A3PA
Models with built-in LED
A3PT
Screen pattern
A3PJ
A3PA
2
Single screen
2
1
2
---
Horizontal 2-split screen
2
---------
Vertical 2-split screen
Horizontal 3-split screen
Vertical 3-split screen
Vertical 2-split screen
4
*2
---
---
4-split screen
Horizontal 3-split screen
4-split screen
4(Low-power incandescent
lamp)
-------
A3PT
Note: Lamp positions for single-screen A3PJ (rectangular model).
*2. These split screen models are available only as individual Units.
They cannot be ordered as sets.
2
A3P
Ordering Information
Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises
the Pushbutton, Lamp, and Switch.
(Not all combinations are possible. Ask your OMRON representative for details.)
Rectangular
Models
(Single Screen)
(Single Screen)
(1)
A3PJ
Standard Loads
Contact type
Standard load (250 VAC, 3 A; 30 VDC, 4 A)
Operation
Output
Lighting
LED
SPDT Chameleon
Case color
DPDT Chameleon
Alternate operation (Self-holding)
Black
Light gray
Black
Light gray
5 VDC
A3PJ-90A11-05E(1)
A3PJ-90A12-05E(1)
A3PJ-90B11-05E(1)
A3PJ-90B12-05E(1)
12 VDC
A3PJ-90A11-12E(1)
A3PJ-90A12-12E(1)
A3PJ-90B11-12E(1)
A3PJ-90B12-12E(1)
24 VDC
A3PJ-90A11-24E(1)
A3PJ-90A12-24E(1)
A3PJ-90B11-24E(1)
A3PJ-90B12-24E(1)
12 VDC
A3PJ-90AG1-12EK
---
A3PJ-90BG1-12EK
A3PJ-90BG2-12EK
24 VDC
A3PJ-90AG1-24EK
A3PJ-90AG2-24EK
A3PJ-90BG1-24EK
A3PJ-90BG2-24EK
6 VDC/VAC
Incandescent
14 VDC/VAC
lamp
28 VDC/VAC
LED
Momentary operation (Self-resetting)
A3PJ-90A11-06
A3PJ-90A12-06
A3PJ-90B11-06
A3PJ-90B12-06
A3PJ-90A11-14
A3PJ-90A12-14
A3PJ-90B11-14
A3PJ-90B12-14
A3PJ-90A11-28
A3PJ-90A12-28
A3PJ-90B11-28
A3PJ-90B12-28
5 VDC
A3PJ-90C11-05E(1)
A3PJ-90C12-05E(1)
A3PJ-90D11-05E(1)
A3PJ-90D12-05E(1)
12 VDC
A3PJ-90C11-12E(1)
A3PJ-90C12-12E(1)
A3PJ-90D11-12E(1)
A3PJ-90D12-12E(1)
24 VDC
A3PJ-90C11-24E(1)
A3PJ-90C12-24E(1)
A3PJ-90D11-24E(1)
A3PJ-90D12-24E(1)
12 VDC
A3PJ-90CG1-12EK
A3PJ-90CG2-12EK
A3PJ-90DG1-12EK
---
24 VDC
A3PJ-90CG1-24EK
A3PJ-90CG2-24EK
A3PJ-90DG1-24EK
A3PJ-90DG2-24EK
6 VDC/VAC
Incandescent
14 VDC/VAC
lamp
28 VDC/VAC
A3PJ-90C11-06
A3PJ-90C12-06
A3PJ-90D11-06
A3PJ-90D12-06
A3PJ-90C11-14
A3PJ-90C12-14
A3PJ-90D11-14
A3PJ-90D12-14
A3PJ-90C11-28
A3PJ-90C12-28
A3PJ-90D11-28
A3PJ-90D12-28
Pushbutton
color
symbol
R
O
G
W
*1
*2
R
O
G
W
*1
*2
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example: Red A3PJ-90A11-24E R
*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.
*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.
Microloads
Contact type
Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)
Operation
Output
Lighting
LED
SPDT Chameleon
Incandescent
lamp
LED
DPDT Chameleon
Incandescent
lamp
Momentary operation (Self-resetting)
Case color
Black
Light gray
5 VDC
A3PJ-90E11-05E(1)
A3PJ-90E12-05E(1)
12 VDC
A3PJ-90E11-12E(1)
A3PJ-90E12-12E(1)
24 VDC
A3PJ-90E11-24E(1)
A3PJ-90E12-24E(1)
12 VDC
A3PJ-90EG1-12EK
24 VDC
A3PJ-90EG1-24EK
A3PJ-90EG2-24EK
6 VDC/VAC
A3PJ-90E11-06
A3PJ-90E12-06
14 VDC/VAC
A3PJ-90E11-14
28 VDC/VAC
A3PJ-90E11-28
---
---
Pushbutton
color symbol
R
O
G
W
*1
*2
A3PJ-90E12-28
5 VDC
A3PJ-90G11-05E(1)
---
12 VDC
A3PJ-90G11-12E(1)
A3PJ-90G12-12E(1)
24 VDC
A3PJ-90G11-24E(1)
A3PJ-90G12-24E(1)
R
O
G
W
12 VDC
A3PJ-90GG1-12EK
24 VDC
A3PJ-90GG1-24EK
---
*1
6 VDC/VAC
A3PJ-90G11-06
A3PJ-90G12-06
14 VDC/VAC
A3PJ-90G11-14
A3PJ-90G12-14
28 VDC/VAC
A3PJ-90G11-28
A3PJ-90G12-28
*2
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example: Red A3PJ-90E11-24E R
*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.
*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.
Individual models: Refer to pages 9 to 12.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
(The Pushbutton, Lamp, and Switch can be ordered separately.)
■ Accessories: Refer to pages 13 to 15.
3
A3P
Ordering Information
Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises
the Pushbutton, Lamp, and Switch.
(Not all combinations are possible. Ask your OMRON representative for details.)
Rectangular (Horizontal 2-split Screen)
Models
Standard Loads
(Horizontal 2-split Screen)
(2)
A3PJ
Contact type
Standard load (250 VAC, 3 A; 30 VDC, 4 A)
Operation
Output
Momentary operation (Self-resetting)
Case color
Lighting
LED
SPDT Incandescent
lamp
LED
DPDT Incandescent
lamp
(1)
Black
Alternate operation (Self-holding)
Light gray
Black
Pushbutton
color symbol
Light gray
5 VDC
A3PJ-90A21-24E(1)(2)
A3PJ-90A22-24E(1)(2)
A3PJ-90B21-24E(1)(2)
A3PJ-90B22-24E(1)(2)
6 VDC/VAC
A3PJ-90A21-06
A3PJ-90A22-06
A3PJ-90B21-06
A3PJ-90B22-06
14 VDC/VAC
A3PJ-90A21-14
A3PJ-90A22-14
A3PJ-90B21-14
A3PJ-90B22-14
28 VDC/VAC
A3PJ-90A21-28
A3PJ-90A22-28
A3PJ-90B21-28
A3PJ-90B22-28
24 VDC
A3PJ-90C21-24E(1)(2)
A3PJ-90C22-24E(1)(2)
A3PJ-90D21-24E(1)(2)
A3PJ-90D22-24E(1)(2)
6 VDC/VAC
A3PJ-90C21-06
A3PJ-90C22-06
A3PJ-90D21-06
A3PJ-90D22-06
14 VDC/VAC
A3PJ-90C21-14
A3PJ-90C22-14
A3PJ-90D21-14
A3PJ-90D22-14
28 VDC/VAC
A3PJ-90C21-28
A3PJ-90C22-28
A3PJ-90D21-28
A3PJ-90D22-28
ROGW
*
ROGW
*
Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example:
Red
White
Upper A3PJ-90D21-24E R W
Lower
Red White
* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milky white and transparent). Use the appropriate
combination.
Rectangular (Horizontal 2-split Screen)
Models
(Horizontal 2-split Screen)
(1)
(2)
A3PJ
Microloads
Contact type
Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)
Operation
Output
Momentary operation (Self-resetting)
Case color
Lighting
LED
SPDT Incandescent
lamp
LED
DPDT Incandescent
lamp
Black
Pushbutton
color symbol
Light gray
5 VDC
A3PJ-90E21-24E(1)(2)
A3PJ-90E22-24E(1)(2)
6 VDC/VAC
A3PJ-90E21-06
A3PJ-90E22-06
14 VDC/VAC
A3PJ-90E21-14
A3PJ-90E22-14
28 VDC/VAC
A3PJ-90E21-28
A3PJ-90E22-28
5 VDC
A3PJ-90G21-24E(1)(2)
A3PJ-90G22-24E(1)(2)
6 VDC/VAC
A3PJ-90G21-06
A3PJ-90G22-06
14 VDC/VAC
A3PJ-90G21-14
A3PJ-90G22-14
28 VDC/VAC
A3PJ-90G21-28
A3PJ-90G22-28
ROGW
*
ROGW
*
Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example:
Red
White
Upper A3PJ-90D21-24E R W
Lower
Red White
* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milky-white and transparent). Use the appropriate
combination.
Individual models: Refer to pages 9 to 12.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
(The Pushbutton, Lamp, and Switch can be ordered separately.)
■ Accessories: Refer to pages 13 to 15.
4
A3P
Ordering Information
Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises
the Pushbutton, Lamp, and Switch.
(Not all combinations are possible. Ask your OMRON representative for details.)
Square
Models
(Single Screen)
(Single Screen)
(1)
A3PA
Standard Loads
Contact type
Standard load (250 VAC, 3 A; 30 VDC, 4 A)
Operation
Output
Lighting
LED
SPDT Chameleon
Incandescent
lamp
LED
DPDT Chameleon
Incandescent
lamp
Momentary operation (Self-resetting)
Case color
Black
Alternate operation (Self-holding)
Light gray
Black
Pushbutton
color symbol
Light gray
5 VDC
A3PA-90A11-05E(1)
A3PA-90A12-05E(1)
A3PA-90B11-05E(1)
A3PA-90B12-05E(1)
12 VDC
A3PA-90A11-12E(1)
A3PA-90A12-12E(1)
A3PA-90B11-12E(1)
A3PA-90B12-12E(1)
24 VDC
A3PA-90A11-24E(1)
A3PA-90A12-24E(1)
A3PA-90B11-24E(1)
A3PA-90B12-24E(1)
12 VDC
A3PA-90AG1-12EK
A3PA-90AG2-12EK
A3PA-90BG1-12EK
A3PA-90BG2-12EK
24 VDC
A3PA-90AG1-24EK
A3PA-90AG2-24EK
A3PA-90BG1-24EK
A3PA-90BG2-24EK
6 VDC/VAC
A3PA-90A11-06
A3PA-90A12-06
A3PA-90B11-06
A3PA-90B12-06
14 VDC/VAC
A3PA-90A11-14
A3PA-90A12-14
A3PA-90B11-14
A3PA-90B12-14
28 VDC/VAC
A3PA-90A11-28
A3PA-90A12-28
A3PA-90B11-28
A3PA-90B12-28
5 VDC
A3PA-90C11-05E(1)
A3PA-90C12-05E(1)
A3PA-90D11-05E(1)
A3PA-90D12-05E(1)
12 VDC
A3PA-90C11-12E(1)
A3PA-90C12-12E(1)
A3PA-90D11-12E(1)
A3PA-90D12-12E(1)
24 VDC
A3PA-90C11-24E(1)
A3PA-90C12-24E(1)
A3PA-90D11-24E(1)
A3PA-90D12-24E(1)
12 VDC
A3PA-90CG1-12EK
A3PA-90CG2-12EK
A3PA-90DG1-12EK
A3PA-90DG2-12EK
24 VDC
A3PA-90CG1-24EK
A3PA-90CG2-24EK
A3PA-90DG1-24EK
A3PA-90DG2-24EK
6 VDC/VAC
A3PA-90C11-06
A3PA-90C12-06
A3PA-90D11-06
A3PA-90D12-06
14 VDC/VAC
A3PA-90C11-14
A3PA-90C12-14
A3PA-90D11-14
A3PA-90D12-14
28 VDC/VAC
A3PA-90C11-28
A3PA-90C12-28
A3PA-90D11-28
A3PA-90D12-28
R
O
G
W
*1
*2
R
O
G
W
*1
*2
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example: Red A3PA-90A11-24E R
*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.
*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.
Microloads
Contact type Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)
Operation
Output
Lighting
LED
SPDT Chameleon
Incandescent
lamp
Momentary operation (Self-resetting)
Case color
Black
5 VDC
A3PA-90E11-05E(1)
A3PA-90E12-05E(1)
12 VDC
A3PA-90E11-12E(1)
A3PA-90E12-12E(1)
24 VDC
A3PA-90E11-24E(1)
A3PA-90E12-24E(1)
12 VDC
A3PA-90EG1-12EK
---
24 VDC
A3PA-90EG1-24EK
A3PA-90EG2-24EK
6 VDC/VAC
A3PA-90E11-06
A3PA-90E12-06
14 VDC/VAC
28 VDC/VAC
--A3PA-90E11-28
5 VDC
LED
DPDT Chameleon
Incandescent
lamp
A3PA-90E12-14
---
---
A3PA-90G11-12E(1)
A3PA-90G12-12E(1)
24 VDC
A3PA-90G11-24E(1)
A3PA-90G12-24E(1)
12 VDC
A3PA-90GG1-12EK
24 VDC
A3PA-90GG1-24EK
6 VDC/VAC
A3PA-90G11-06
28 VDC/VAC
---
*1
*2
R
O
G
W
*1
A3PA-90G12-06
--A3PA-90G11-28
R
O
G
W
A3PA-90E12-28
12 VDC
14 VDC/VAC
Pushbutton
color symbol
Light gray
---
*2
A3PA-90G12-28
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example: Red A3PA-90E11-24E R
*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.
*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.
Individual models: Refer to pages 9 to 12.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
(The Pushbutton, Lamp, and Switch can be ordered separately.)
■ Accessories: Refer to pages 13 to 15.
5
A3P
Ordering Information
Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises
the Pushbutton, Lamp, and Switch.
(Not all combinations are possible. Ask your OMRON representative for details.)
(Horizontal 2-split Screen)
Square
Models
Standard Loads
(Horizontal 2-split Screen)
Operation
Black
Light gray
24 VDC
A3PA-90A21-24E(1)(2)
A3PA-90A22-24E(1)(2)
A3PA-90B21-24E(1)(2)
A3PA-90B22-24E(1)(2)
6 VDC/VAC
A3PA-90A21-06
A3PA-90A22-06
A3PA-90B21-06
A3PA-90B22-06
Incandescent lamp 14 VDC/VAC
A3PA-90A21-14
A3PA-90A22-14
A3PA-90B21-14
A3PA-90B22-14
28 VDC/VAC
A3PA-90A21-28
A3PA-90A22-28
A3PA-90B21-28
A3PA-90B22-28
24 VDC
A3PA-90C21-24E(1)(2)
A3PA-90C22-24E(1)(2)
A3PA-90D21-24E(1)(2)
A3PA-90D22-24E(1)(2)
6 VDC/VAC
A3PA-90C21-06
A3PA-90C22-06
A3PA-90D21-06
A3PA-90D22-06
Incandescent lamp 14 VDC/VAC
A3PA-90C21-14
A3PA-90C22-14
A3PA-90D21-14
A3PA-90D22-14
28 VDC/VAC
A3PA-90C21-28
A3PA-90C22-28
A3PA-90D21-28
A3PA-90D22-28
LED
DPDT
Alternate operation (Self-holding)
Light gray
Lighting
LED
SPDT
Standard load (250 VAC, 3 A; 30 VDC, 4 A)
Momentary operation (Self-resetting)
Black
Output
Case color
(2)
A3PA
Contact type
(1)
Pushbutton
color symbol
ROGW
*
ROGW
*
Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example:
Red
White
Upper A3PA-90D21-24E R W
Lower
Red White
* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use
the appropriate combination.
Square
Models
Microloads
(Horizontal 2-split Screen)
(Horizontal 2-split Screen)
(1)
(2)
A3PA
Contact type Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)
Operation
Output
Lighting
LED
SPDT
Black
Pushbutton
color symbol
Light gray
24 VDC
A3PA-90E21-24E(1)(2)
A3PA-90E22-24E(1)(2)
6 VDC/VAC
A3PA-90E21-06
A3PA-90E22-06
Incandescent lamp 14 VDC/VAC
A3PA-90E21-14
A3PA-90E22-14
28 VDC/VAC
A3PA-90E21-28
A3PA-90E22-28
24 VDC
A3PA-90G21-24E(1)(2)
A3PA-90G22-24E(1)(2)
6 VDC/VAC
A3PA-90G21-06
A3PA-90G22-06
Incandescent lamp 14 VDC/VAC
A3PA-90G21-14
A3PA-90G22-14
28 VDC/VAC
A3PA-90G21-28
A3PA-90G22-28
LED
DPDT
Case color
Momentary operation (Self-resetting)
ROGW
*
ROGW
*
Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example:
Red
Upper A3PA-90D21-24E R W
White Lower
Red White
* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use
the appropriate combination.
Individual models: Refer to pages 9 to 12.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
(The Pushbutton, Lamp, and Switch can be ordered separately.)
■ Accessories: Refer to pages 13 to 15.
6
A3P
Ordering Information
Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises
the Pushbutton, Lamp, and Switch.
Round
(Single Screen)
(Single Screen)
(1)
A3PT
Standard Loads
Contact type
Output
Lighting
LED
SPDT
Momentary operation
(Self-resetting)
Alternate operation
(Self-holding)
Case color
Light gray
Light gray
24 VDC
A3PT-90A12-24C(1)
A3PT-90B12-24C(1)
6 VDC/VAC
A3PT-90A12-06
A3PT-90B12-06
Incandescent lamp 14 VDC/VAC
A3PT-90A12-14
28 VDC/VAC
A3PT-90A12-28
A3PT-90B12-28
24 VDC
A3PT-90C12-24C(1)
A3PT-90D12-24C(1)
6 VDC/VAC
A3PT-90C12-06
A3PT-90D12-06
Incandescent lamp 14 VDC/VAC
A3PT-90C12-14
A3PT-90D12-14
28 VDC/VAC
A3PT-90C12-28
A3PT-90D12-28
LED
DPDT
Standard load (250 VAC, 3 A; 30 VDC, 4 A)
Operation
---
Pushbutton
color symbol
ROGW
*
ROGW
*
Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example: Red A3PT-90A12-24C R
* Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT (round models), however,
are not supplied with legend plates.
Round
(Single Screen)
(Single Screen)
(1)
A3PT
Microloads
Contact type
Output
SPDT
DPDT
Lighting
Microload
(125 VAC, 0.1 A; 30 VDC, 0.1 A)
Operation
Momentary operation
(Self-resetting)
Case color
Light gray
LED
24 VDC
A3PT-90E12-24C(1)
Incandescent lamp
28 VDC/VAC
A3PT-90E12-28
LED
24 VDC
A3PT-90G12-24C(1)
Incandescent lamp
28 VDC/VAC
A3PT-90G12-28
Pushbutton
color symbol
ROGW
*
GW
*
Note: Enter the desired color symbols for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.
Example: Red A3PT-90E12-24C R
* Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT (round models), however,
are not supplied with legend plates.
Individual models: Refer to pages 9 to 12.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
(The Pushbutton, Lamp, and Switch can be ordered separately.)
■ Accessories: Refer to pages 13 to 15.
7
A3P
Ordering Information
Illumination-only and Colored-illumination LED Models
“Illumination only” describes LED models for which the screen color is the same whether the LED is lit or not. The screen simply becomes brighter
when the LED lights.
Example: Red LED
Not lit
Cap (transparent)
Red
Lit
Legend plate (transparent)
Red
Pushbutton
(Display)
Colored plate (red)
Lamp
holder
LED lamp (red) - - - Lamp
“Colored illumination” describes LED models for which the screen color is white when the LED is not lit and changes to the color of the LED lamp
when the LED is lit.
Example: Red LED
Not lit
White
Cap (transparent)
Lit
Legend plate (transparent)
Red
Pushbutton
(Display)
Colored plate (white)
Lamp
holder
LED lamp (red) - - - Lamp
Ordering: With colored-illumination models, order the Pushbutton, Lamp, and Switch as shown in the following table.
Pushbutton
Select the LED lamp-lighted model required
from the selection on page 10. Each assembly
includes the number of white colored plates required to enable colored illumination for the
corresponding screen-split configuration. For
example, 4-split screen models include 4 white
colored plates.
Lamp
Switch
Select the LED lamps to suit your desired coloration from the selection on page 12. Number
of necessary LED lamps (standard)
A3PJ (rectangular): 4
Select from the Switches on page 12.
A3PA (square): 2
A3PT (round): 2
8
A3P
Ordering Information
Ordering Individually ............... Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available as
sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.
LED-lighted/Chameleon Models
(LED is built into the Pushbutton.)
LED Lamp-lighted Models
(LED lamp and Pushbutton are separate.)
Incandescent Lamp-lighted Models
(Incandescent lamp and Pushbutton are separate.)
Pushbutton
Pushbutton
· For Pushbutton Switch
A3P@-502@
· For Pushbutton Switch
A3P@-501@
Lamp (LED Lamp)*1
Lamp (Incandescent Lamp)*2
Pushbutton
Round (A3PT) models not available.
· For Pushbutton Switch
A3P@-5@@@-@@E
· Standard lamp
SLL-@@
· Low-power lamp
SLL-@@H
SLL-@@E@
Switch *
Switch *
Switch *
· For Pushbutton Switch
A3P@-7@@@-@
· For Pushbutton Switch
A3P@-7@@@-@
Round (A3PT) models not available.
· For Pushbutton Switch
A3P@-7@@@-@
* The Switch is compatible with LED-lighted models, LED lamp-lighted models, and incandescent lamp-lighted models.
*1. Number of necessary LED lamps.
Screen pattern
*2. Number of necessary incandescent lamps.
A3PA
A3PT
Screen pattern
A3PJ
A3PA
Single screen
2
2
Single screen
2
1
2
Horizontal 2-split screen
2
---
Horizontal 2-split screen
2
---
Vertical 2-split screen
A3PJ
4
Vertical 2-split screen
Vertical 3-split screen
Horizontal 3-split screen
Vertical 3-split screen
Horizontal 3-split screen
4-split screen
4-split screen
Ordering set combinations: Refer to page 3 to 7.
A3PT
4
(low-power
incandescent lamp)
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
■ Accessories: Refer to pages 13 to 15.
9
A3P
Ordering Information
Ordering Individually ................Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available as
sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.
Pushbutton
LED-lighted Models (LED is built-in.)
Split-screen color
(color symbol)
Appearance
Single screen
Rectangular
models
White
Red
Horizontal
2-split screen
Green
Orange
Single screen
Square models
White
Horizontal
2-split screen
Red
Green
Orange
White (W)
Red (R)
Green (G)
A3PJ-5702
-@@E
A3PJ-5712
-@@E
A3PJ-5722
-@@E
A3PJ-5732
-@@E
A3PJ-5742
-@@E
A3PA-5702
-@@E
A3PA-5712
-@@E
A3PA-5722
-@@E
A3PA-5732
-@@E
A3PA-5742
-@@E
A3PJ-5701
-@@E
A3PJ-5711
-@@E
A3PJ-5721
-@@E
A3PJ-5731
-@@E
A3PJ-5741
-@@E
A3PA-5701
-@@E
A3PA-5711
-@@E
A3PA-5721
-@@E
A3PA-5731
-@@E
A3PA-5741
-@@E
A3PJ-5703
-@@E
A3PJ-5713
-@@E
A3PJ-5723
-@@E
A3PJ-5733
-@@E
A3PJ-5743
-@@E
A3PA-5703
-@@E
A3PA-5713
-@@E
A3PA-5723
-@@E
A3PA-5733
-@@E
A3PA-5743
-@@E
Selection precautions
Orange (O)
A3PJ-5706
-@@E
A3PJ-5716
-@@E
A3PJ-5726
-@@E
A3PJ-5736
-@@E
A3PJ-5746
-@@E
A3PA-5706
-@@E
A3PA-5716
-@@E
A3PA-5726
-@@E
A3PA-5736
-@@E
A3PA-5746
-@@E
• Enter the voltage to
be used in the@@at
the end of the model number.
Examples of voltages used:
5V=@
0@
5E
12V=@
1@
2E
24V=@
2@
4E
Horizontal 2-split
screen models support only 24V.
• For the color of the
shaded part, select
the model according to the colors
given at the top of
the table.
Note: 1. A cap, legend plate (transparent), colored plate, white plunger case, and LED (with a current-limiting resistor) are built into the standard lighting unit.
2. Split-screen coloring configurations are given with the OMRON mark on the Switch facing down.
3. The LED is built-in and cannot be replaced individually.
LED Lamp-lighted Models (LED is not built-in.)
Rectangular models
Square models
Round models
Appearance
Screen pattern
Selection precautions
Screen
Model
Screen
Model
Screen
Model
Single screen
A3PJ-5021
A3PA-5021
Horizontal
2- split screen
A3PJ-5022
A3PA-5022
Vertical 2-split
screen
A3PJ-5023
Horizontal 3-split
screen
A3PJ-5024
---
---
Vertical 3-split
screen
A3PJ-5025
---
---
4-split screen
---
A3PT-5021
---
---
• Parts included:
Colored plates (white, red, green, and orange), a legend plate (transparent), and a
light baffle (split-screen models only) are included. Use the appropriate combination for
the LED coloring required.
• The number of white colored plates required
to enable colored illumination for the corresponding screen-split configuration is included. (For example, 4-split screen models
include 4 white colored plates).
• The number of colored plates included for each
model are shown in the following table.
Screen pattern
A3PJ-5026
---
---
Single screen
Horizontal 2split screens
Vertical 2-split
screens
Horizontal 3split screens
Vertical 3-split
screens *
4-split screen
White
Red
Green
Orange
1
1
1
1
2
1
1
1
3
2
2
2
4
1
1
1
* The following types of colored plates are included with Horizontal and Vertical 3-splitScreen Switches.
White: One colored plate for a 2-split screen and two colored plates for a 4-split screen.
Red, green, or orange: One colored plate for a 2-split screen and one colored plates for a 4-split screen.
Ordering set combinations: Refer to page 3 to 7.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
■ Accessories: Refer to pages 13 to 15.
10
A3P
Ordering Information
Ordering Individually ............... Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available as
sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.
Pushbutton
Incandescent Lamp-lighted Models (Incandescent lamp is not built-in.)
Rectangular models
Square models
Round models
Appearance
Screen pattern
Selection precautions
Screen
Model
Screen
Model
Screen
Model
Single screen
A3PJ-5011
A3PA-5011
A3PT-5011 *
Horizontal 2split screen
A3PJ-5012
A3PA-5012
---
Vertical 2-split
screen
A3PJ-5013
Horizontal 3-split
screen
A3PJ-5014
Vertical 3-split
screen
A3PJ-5015
4-split screen
A3PJ-5016
• Parts included:
Colored plates (white, red, green, orange, and
blue), legend plates (transparent and milk white),
and a light baffle (split-screen models only) are
supplied.
* A3PT (round) models do not contain a legend plate.
• The number of colored plates included is shown in
the following table.
---
---
---
---
---
---
---
---
Screen pattern
White
Red
Green
Orange
Blue
Single screen
Horizontal 2split screens
Vertical 2-split
screens
Horizontal 3split screens
Vertical 3-split
screens *
4-split screen
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
* The following types of colored plates are included with Horizontal and Vertical 3-splitScreen Switches.
All colors: One colored plate for a 2-split screen and one colored plate for a 4-split screen.
Chameleon Models (with Built-in LED)
Appearance
Rectangular
Square
Rated voltage
Chameleon pushbutton
switch
12 VDC
A3PJ-5800-12E
24 VDC
A3PJ-5800-24E
12 VDC
A3PA-5800-12E
24 VDC
A3PA-5800-24E
Note: 1. With chameleon models the whole screen lights red, green, or orange
(i.e., red and green simultaneously).
2. A cap, legend plate (transparent), white colored plate, and LED (with a
current-limiting resistor) are built into the Pushbutton.
Ordering set combinations: Refer to page 3 to 7.
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
■ Accessories: Refer to pages 13 to 15.
11
A3P
Ordering Information
Ordering Individually ..........................Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available
as sets can be created using individual Units. Also, store the parts as spares for maintenance and
repairs.
Pushbutton
(For information on mounting, refer to page 25.)
LED Lamp
Voltage
Color
Red
Yellow
Green
White
5 VDC
Model (DC only)
SLL-05ER
SLL-05EY
SLL-05EG
SLL-05EW
12 VDC
Model (DC only)
SLL-12ER
SLL-12EY
SLL-12EG
SLL-12EW
24 VDC
Model (DC only)
SLL-24ER
SLL-24EY
SLL-24EG
SLL-24EW
Applicable cap (color)
(colored plate)
Selection precautions
Red
Orange
Green
White
In the standard setup, 4 LED lamps are used
with A3PJ models and 2 LED lamps are
used with A3PA and A3PT models.
Incandescent Lamp
Lamp type
Standard lamp
Low-power lamp
Selection precautions
5 VAC/VDC
SLL-06
SLL-06H
12 VAC/VDC
SLL-14
SLL-14H
24 VAC/VDC
SLL-28
SLL-28H
• In the standard setup for A3PJ models, 2 lamps are used with single screen models, and 4 lamps are used with split-screen models.
If 3 or 4 lamps are lit continuously, use low-power lamps.
• In the standard setup for A3PA models, 1 lamp is used with single
screen models, and 2 lamps are used with split-screen models.
• In the standard setup for A3PT models, 2 lamps are used.
Voltage
Switch
(common to both incandescent lamp-lighted models and LED models)
Rectangular models Square models Round models
Appearance
Selection precautions
Contact
type
Switch
Number of
outputs
Model
Model
Model
Operation
Momentary operation
A3PJ-7010-1
A3PA-7010-1
A3PT-7010-2
Alternate operation
A3PJ-7020-1
A3PA-7020-1
A3PT-7020-2
Momentary operation
A3PJ-7030-1
A3PA-7030-1
A3PT-7030-2
Alternate operation
A3PJ-7040-1
A3PA-7040-1
A3PT-7040-2
Momentary operation
A3PJ-7150-1
---
---
Alternate operation
A3PJ-7160-1
---
---
Momentary operation
A3PJ-7050-1
A3PA-7050-1
A3PT-7050-2
Alternate operation
A3PJ-7060-1
A3PA-7060-1
A3PT-7060-2
Momentary operation
A3PJ-7070-1
A3PA-7070-1
A3PT-7070-2
Alternate operation
A3PJ-7080-1
A3PA-7080-1
A3PT-7080-2
Momentary operation
A3PJ-7170-1
---
---
Alternate operation
A3PJ-7180-1
---
---
Standard load
1
Silver alloy
contact
2
3
Microload
1
Gold alloy
contact
2
3
Ordering set combinations: Refer to page 3 to 7.
• The end digit denotes the
color of the flange: -1
denotes a black flange,
and -2 denotes a light
gray flange. Round
switches are available
only in light gray, and not
in black.
• Use the Switch in combination with the same
shape Lamp (rectangular, square or round).
Example: For rectangular
Lamp A3PJ-5011, select
Switch A3PJ-7@@0-@.
On the Switch itself, however, only 3 digits are
shown, as follows:
A3PJ-7@@.
• Momentary operation is
self-resetting, and alternate operation is selfholding (i.e., push-on,
push-off).
■ Specifications: Refer to page 15. ■ Dimensions: Refer to page 18.
■ Accessories: Refer to pages 13 to 15.
12
A3P
Ordering Information
Accessories, Replacements, and Tools
Accessories
Name
Socket
Appearance
Classification
Rectangular
Square
Application precautions
Wire-wrap terminal
A3PJ-4101
A3PA-4101
PCB terminal
A3PJ-4102
A3PA-4102
Solder terminal
A3PJ-4103
A3PA-4103
• The Socket cannot be used with
when mounting multiple Switches or with 3C models.
• You can use the same Sockets
for the A3P Ultra Bright Lighted
Pushbutton Switches.
Black
A3PJ-4001
A3PA-4001
Light gray
A3PJ-4002
A3PA-4002
Black
A3PJ-4004
Light gray
A3PJ-4005
Black
A3PJ-4007
A3PA-4007
Light gray
A3PJ-4008
A3PA-4008
Black
A3PJ-4010
Light gray
A3PJ-4011
Short edge barrier
(Horizontal mounting) (1 pair)
Long edge barrier
(Vertical mounting)
(1 pair)
---
Barrier
Short intermediate
barrier (Horizontal
mounting)
Long intermediate
barrier (Vertical
mounting)
• The purpose of the barrier is to
prevent malfunctioning and to
improve design image of the
mounting panel.
• Intermediate barrier × 1.
• Edge barriers × 1 pair (2 Units).
• Mount short barriers horizontally.
• Mount long barriers vertically.
• For details on mounting, refer to
page 25.
• You can use the same Sockets
for the A3P Ultra Bright Lighted
Pushbutton Switches.
---
For horizontal mounting (with
OMRON logo facing down)
A3PJN-5050
A3PAN-5050
For vertical mounting (with OMRON logo facing to the right)
A3PJN-5055
A3PAN-5055
Switch guard
Seal cover
---
A3PJ-5060
A3PA-5060
Long mounting
plate
---
A3PJ-3002
---
• Can be used by exchanging with
the cap.
• Cannot be used with seal cover.
• Can be used with barrier.
• Use horizontal mounting guard
for consecutive horizontal
mounting, and use vertical
mounting guard for consecutive
vertical mounting.
• You can use the same Sockets
for the A3P Ultra Bright Lighted
Pushbutton Switches.
• Cannot be used with barrier and/
or switch guard.
• For details on mounting, refer to
page 25.
• Cap is manufactured from vinyl
chloride.
• You can use the same Sockets
for the A3P Ultra Bright Lighted
Pushbutton Switches.
• Use when vertically mounting individual (with barrier) or multiple
Switches (in standard mounting
style and with barrier). Since a
short mounting plate is attached
to the Switch, replace it with the
long one.
• You can use the same Sockets
for the A3P Ultra Bright Lighted
Pushbutton Switches.
13
A3P
Ordering Information
Accessories
Name
Colored plate
for incandescent lamp
Colored plate
for LED
Light baffle
Appearances
Classification
White
Single screen
Red
Green
Blue
Yellow
Orange
White
Horizontal 2Red
split screen
Green
Blue
Yellow
Orange
White
Vertical 2-split
Red
screen
Green
Blue
Yellow
Orange
White
4-split screen
Red
Green
Blue
Yellow
Orange
White
Single screen
Red
Green
Yellow
Orange
White
Horizontal 2split screen
Red
Green
Yellow
Orange
White
Vertical 2-split
screen
Red
Green
Yellow
Orange
White
4-split screen
Red
Green
Yellow
Orange
Horizontal 2-split screen
Vertical 2-split screen
Long axis
Horizontal 3split screen
Short axis
Long axis
Vertical 3-split
screen
Short axis
Long axis
4-split screen
Short axis
A3PJ
A3PJ-5101
A3PJ-5102
A3PJ-5103
A3PJ-5104
A3PJ-5105
A3PJ-5106
A3PJ-5121
A3PJ-5122
A3PJ-5123
A3PJ-5124
A3PJ-5125
A3PJ-5126
A3PJ-5131
A3PJ-5132
A3PJ-5133
A3PJ-5134
--A3PJ-5136
A3PJ-5161
A3PJ-5162
A3PJ-5163
--A3PJ-5165
A3PJ-5166
A3PJ-5301
A3PJ-5302
A3PJ-5303
A3PJ-5305
A3PJ-5306
A3PJ-5321
A3PJ-5322
A3PJ-5323
A3PJ-5325
A3PJ-5326
A3PJ-5331
A3PJ-5332
A3PJ-5333
A3PJ-5335
A3PJ-5336
A3PJ-5361
A3PJ-5362
A3PJ-5363
A3PJ-5365
A3PJ-5366
A3PJ-4302
A3PJ-4303
A3PJ-4304
A3PJ-4305
A3PJ-4306
A3PJ-4307
A3PJ-4304
A3PJ-4308
A3PA
A3PA-5101
A3PA-5102
A3PA-5103
A3PA-5104
A3PA-5105
A3PA-5106
A3PA-5121
A3PA-5122
A3PA-5123
A3PA-5124
A3PA-5125
A3PA-5126
------------------------A3PA-5301
A3PA-5302
A3PA-5303
A3PA-5305
A3PA-5306
A3PA-5321
A3PA-5322
A3PA-5323
A3PA-5325
A3PA-5326
--------------------A3PA-4302
---------------
Transparent legend plate
A3PJ-5202
A3PA-5202
Milk-white legend plate
A3PJ-5201
A3PA-5201
Transparent cap
A3PJ-5600
A3PA-5600
Crimp-processed transparent cap
A3PJ-5600-A
A3PA-5600-A
Legend plate
Cap
Application precautions
• Keep mounted at all times.
• Contact your OMRON representative for color changes or other
specifications.
• For details on mounting, refer to
page 25.
• You cannot use the same Colored
Plates for Incandescent Lamps for
the A3P Ultra Bright Lighted Pushbutton Switches.
• Keep mounted at all times.
If the colored plate is lost or damaged, contact OMRON.
• Use in accordance with coloring of
the built-in LED.
• For details on mounting, refer to
page 25.
• You cannot use the same Colored
Plates for Incandescent Lamps for
the A3P Ultra Bright Lighted Pushbutton Switches.
• Keep mounted at all times.
If the light baffle is lost, contact
OMRON.
• Used in LED lamp-lighted models.
Cannot be used in LED-lighted
models.
• You cannot use the same Colored
Plates for Incandescent Lamps for
the A3P Ultra Bright Lighted Pushbutton Switches.
• A transparent legend plate is
mounted on the Pushbutton.
• You cannot use the same Colored
Plates for Incandescent Lamps for
the A3P Ultra Bright Lighted Pushbutton Switches.
• You can use the same Sockets for
the A3P Ultra Bright Lighted Pushbutton Switches.
• The surface is crimp-processed, so
there is no reflection.
• You can use the same Sockets for
the A3P Ultra Bright Lighted Pushbutton Switches.
14
A3P
Ordering Information
Tools
Name
Appearance
Classification
Model
---
A3PJ-5080
Extractor
Application precautions
• Use to extract components when
replacing the Pushbutton.
• You can use the same Sockets for
the A3P Ultra Bright Lighted Pushbutton Switches.
Specifications
Approved Standard Ratings
Ratings
UL (File No. E41515), CSA (File No. LR45258)
Contact Ratings
Silver Alloy Contacts (for Standard Loads)
Standard Load:
5 A at 125 VAC
3 A at 250 VAC
0.1 A at 125 VAC
0.1 A at 30 VDC
Microload:
Rated
voltage
(V)
Note: Certification has been obtained for the Switch Unit.
For detailed information on individual products that have received
certification, consult your supplier.
CCC (GB14048.5)
Standard Load:
3 A at 250 VAC
4 A at 30 VDC
0.1 A at 125 VAC
0.1 A at 30 VDC
Microload:
Non-inductive load (A)
Resistive load
NC
NO
Lamp load
NC
NO
Inductive load (A)
Inductive load
NC
NO
Motor load
NC
125 VAC
250 VAC
5
3
0.7
0.5
3
2
1.3
0.8
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC
5
5
4
0.4
0.2
2
2
2
0.05
0.03
4
4
3
0.4
0.2
3
3
3
0.05
0.03
NO
Note: 1. The above values are for steady-state currents.
2. Inductive load: Power factor = 0.4; time constant = 7 ms.
3. The lamp load has an inrush current of 10 times the steady-state current.
4. The motor load has an inrush current of 6 times the steady-state current.
Standard testing condition
(1) Ambient temperature: 20 ± 2°C
(2) Ambient humidity: 65 ± 5%RH
(3) Operating frequency: 20 times/min.
Gold Alloy Contacts (for Microloads)
Rated voltage (V)
0.1 A at 30 VDC (resistive load);
0.1 A at 125 VAC (resistive load)
Minimum applicable load 1 mA at 5 VDC
LED and Incandescent Lamp Ratings
Characteristics
LED for LED-lighted Models
Model
Applied
voltage
Rated
voltage
Operating frequency
A3PJ/M2PJ
A3PA/M2PA
Rated current
Rated current
Single
screen
2-split
screen
Single
screen
2-split
screen
---
5 VDC±5%
5 VDC
80 mA
---
80 mA
12 VDC±5%
12 VDC
40 mA
---
40 mA
---
24 VDC±5%
24 VDC
20 mA
15 mA × 2
20 mA
13 mA × 2
LED for Chameleon Models
Applied voltage
Rated voltage
12 VDC±5%
24 VDC±5%
Rated current
Green
Red
12 VDC
26 mA
20 mA
24 VDC
13 mA
10 mA
Insulation resistance
Standard load
Contact
resistance Microload
Between terminals of same polarity
Between terminals of different polarity
Between current-carrying metal
Dielectric
part and ground
strength
Between each terminal and
non-current-carrying metal part
Between lamp terminals
Vibration resistance
Malfunction
Shock resistance
Destruction
Malfunction
Incandescent Lamp
Item
Standard lamp
Applied voltage Rated voltage Rated current
Low-power lamp
Rated current
Model
5 VDC
6V
200 mA
SLL-06
Model
100 mA
SLL-06H
12 VDC
14 V
80 mA
SLL-14
40 mA
SLL-14H
24 VDC
28 V
40 mA
SLL-28
25 mA
SLL-28H
Mechanical
Electrical
Life expectancy
Mechanical
Electrical
Weight
Inrush current
NC
NO
LED Lamp (for LED Lamp-lighted Models)
Type
DC only
Applied voltage Rated voltage Rated current
Model
5 VDC±5%
5 VDC
30 mA
SLL-05E@
12 VDC±5%
12 VDC
15 mA
SLL-12E@
24 VDC±5%
24 VDC
12.5 mA
SLL-24E@
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Degree of protection
Electric shock protection class
PTI (proof tracking index)
Pollution degree
120 operations/minute max. *1
30 operations/minute max.
100 MΩ min. (at 500 VDC)
40 mΩ max. (initial value)
40 mΩ max. (initial value)
1,000 VAC, 50/60 Hz for 1 minute *2
2,000 VAC, 50/60 Hz for 1 minute
2,000 VAC, 50/60 Hz for 1 minute
2,000 VAC, 50/60 Hz for 1 minute
1,000 VAC, 50/60 Hz for 1 minute *3
10 to 55 Hz, 1.5 mm double amplitude (1 ms max.)
500 m/s2 max.
200 m/s2 max. (1 ms max.)
Momentary operation models:
1,000,000 operations min.
Alternate operation models:
200,000 operations min.
(One operation consists of set
and reset operations.)
100,000 operations min.
Approx. 30 g
Silver contact: 10 A max.
Silver contact: 10 A max.
LED-lighted models: −10°C to 40°C
(with no icing or condensation)
Incandescent lamp-lighted models:
−10°C to 50°C
(with no icing or condensation)
35% to 85%RH
−25°C to 65°C
IP40
Class II
175
3 (IEC947-5-1)
*1. With alternate operation models, 60 operations/minute max. One operation
cycle consists of set and reset operations.
*2. 600 VAC for microloads.
*3. With no incandescent lamp or LED lamp mounted.
15
A3P
Specifications
Operating Characteristics
Model
Operating
Characteristics
Operating force
Releasing force
Total travel
Pretravel
Lock travel alternate
OF max.
RF min.
TT
PT max.
LTA min.
A3PJ series
A3PA series
A3PT series
Momentary
Alternate
Momentary
Alternate
Momentary
Alternate
operation models operation models operation models operation models operation models operation models
5.88 N
6.86 N
5.88 N
6.86 N
3.92 N
4.90 N
0.39 N
0.29 N
0.39 N
0.29 N
0.39 N
0.29 N
Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
--0.5 mm
--0.5 mm
--0.5 mm
Nomenclature
Model Structure
Lighting
method
Models
Screen
patterns
LED-lighted models
(LED is built-in.)
A3PJ
A3PA
LED lamp-lighted models
(LED lamp is not built-in.)
A3PJ
A3PA
Single
screen
Single
screen
Horizontal 2-split
screen
Horizontal 2-split
screen
Chameleon
(3-color)
Chameleon
(3-color)
LED-lighted models
LED-lighted models
Single
screen
Vertical 3-split
screen
Horizontal 2-split Horizontal 3-split
screen
screen
Vertical 2-split
screen
Single
screen
A3PT
Single
screen
Horizontal 2-split
screen
Horizontal 2-split Horizontal 3-split
screen
screen
Vertical 2-split
screen
4-split screen
LED lamp-lighted models
Incandescent lamp-lighted models
(Incandescent lamp is not built-in.)
A3PJ
A3PA
A3PT
Single
Single
Single Vertical 3-split
screen
screen
screen
screen
Horizontal 2-split
screen
4-split screen
Incandescent lamp-lighted models
Chameleon models (full screen
illumination in one of three colors)
Cap
(transparent)
Cap
(transparent)
Legend plate
(transparent)
Legend plate
(transparent)
Colored
plate
Colored
plate
LED Unit
LED Unit
3-color emitter
Built-in LED
Cap
(transparent)
Pushbutton
Legend plate * (Split-screen models
(transparent)
contain a light
baffle.)
●Pushbutton
colors
Colored
plate
· LED-lighted models and
LED lamp-lighted models
Lamp
holder
White, Red, Green, Orange
· Incandescent lamp-lighted model
White, Red, Green, Blue,
Orange
* Incandescent lamp-lighted
A3PT models do not contain
a legend plate.
●Switch Specifications
Standard load
· 250 VAC, 3 A
30 VDC, 4A
Microload
· 125 VAC, 0.1 A
30 VDC, 0.1 A
Minimum applicable load: 5 VDC, 1 mA
Lamp
●Case Color
Select either black or light
gray to suit your panel design.
(The round A3PT
models are available in
light gray only.)
Switch
16
A3P
Nomenclature
A3P Lighting Method Diagram
The following diagram shows
the Switches with the
LED-lighted
models
mark facing down.
Single screen Horizontal 2-split
models
screen models
• As a set: See page 3.
• Individually: See page 9.
Single screen Horizontal 2-split Vertical 2-split
models
screen models screen models
LED
models
A3PJ
(rectangular)
LED
lamp-lighted
models
Chameleon
models
Vertical 3-split Horizontal 3-split 4-split screen
screen models screen models
Single screen
models
• Individually: See page 9.
(Not available as a set.)
• As a set: See page 3.
• Individually: See page 9.
(Full screen illumination
in one of three colors)
Single screen Horizontal 2-split Vertical 2-split
screen models screen models*
models
Incandescent lamplighted
models
Vertical 3-split Horizontal 3-split 4-split screen
models*
screen models* screen models*
LED-lighted
models
LED
models
A3PA
(square)
LED
lamp-lighted
models
Chameleon
models
Incandescent lamplighted
models
LED
models
LED
lamp-lighted
models
Single screen Horizontal 2-split
models
screen models
Single screen Horizontal 2-split
screen models
models
Single screen
models
Single screen Horizontal 2-split
screen models
models
• As a set: See page 3.
• Individually: See page 9.
*Models indicated with an asterisk are only
available individually.
• As a set: See page 5.
• Individually: See page 9.
• Individually: See page 9.
(Not available as a set.)
• As a set: See page 5.
• Individually: See page 9.
• As a set: See page 5.
• Individually: See page 9.
Single screen
models
• As a set: See page 7.
• Individually: See page 9.
A3PT
(round)
Incandescent lamplighted
models
Single screen
models
• As a set: See page 7.
• Individually: See page 9.
17
A3P
Dimensions
(Unit: mm)
The Dimension shows 2-switch outputs.
A3PJ (Rectangular) Models
A3PA (Square) Models
2.8
26.1
22
29.9±0.2
0.5
OMRON logo
OMRON logo
25±0.1
#110 quick connect terminal/
solder terminal
22.9±0.2
18.9
6.7
32±0.1
43.6
Separator
19.1 × 19.1
25±0.1
25±0.1
#110 quick connect terminal/
solder terminal
22.9±0.2
6.7
43.6
52 max.
52 max.
52.6
52.6
Separator
A3PT (Round) Models
#110 quick connect terminal/solder terminal
22.4 28.5 dia.
OMRON logo
24.9 dia.
32 dia.
23.8
6.4
43.6
52 max.
52.6
Note: The thickness of tab terminals #110 and solder terminals is 0.5 mm.
18
A3P
Dimensions
(Unit: mm)
Terminal connections
LED-lighted Models
(The terminal arrangement diagram shows a 1-switch output. Connections to terminals from the lighting block are the same for 2 outputs.)
Rated voltage
Screen
Model
pattern
5 VDC
Bottom view
12 VDC
Top view
Bottom view
24 VDC
Top view
Bottom view
Top view
Single screen
NO1
NO1
NC1
NC1
C1
LC+
Terminal
arrangement
A3PJ
Bottom view
Horizontal
2-split screen
NO1
C1
Lighting block
NO1
Terminal
arrangement
Top view
Lighting block
Terminal
arrangement
Lighting block
Top view
NO1
L2
NC1
C1
LC+
Terminal
arrangement
Bottom view
Lighting block
Top view
Terminal
arrangement
Bottom view
NO1
LC+
NO1
LC+
NC1
C1
NC1
C1
A3PA
Bottom view
LC+
C1
Lighting block
Terminal
arrangement
2-split screen
LC+
C1
Bottom view
NC1
Single screen
NC1
LC+
Top view
Top view
Bottom view
Top view
NO1
LC+
NC1
C1
Terminal
Lighting block
arrangement
Bottom view
NO1
LC+
NO1
LC+
NC1
C1
NC1
C1
Lighting block
Terminal
arrangement
Lighting block
Lighting block
Terminal
arrangement
Top view
Lighting block
Terminal
arrangement
19
A3P
Dimensions
(Unit: mm)
Incandescent Lamp-lighted/LED Lamp-lighted Models
(All are shown with the OMRON logo facing down. The terminal arrangements are the same as for the LED-lighted models.)
Model
Rectangular A3PJ models
Output
Bottom view
Top view
Square A3PA models
Bottom view
Bottom view
Top view
NO1
NO1
NO1
LC+
LC+
NC1
SPDT
Top view
Round A3PT models
NC1
LC+
C1
NC1
C1
Terminal
arrangement
C1
Lighting block
Terminal
arrangement
Lighting block
Top view
Bottom view
Top view
Bottom view
Lighting block
Terminal
arrangement
Bottom view
Top view
NO1 NO2
NO1 NO2
PPDT
LC+
NC1 NC2
C1 C2
LC+
NO1 NO2
LC+
NC1 NC2
C2
C1
NC1
C1
Terminal
arrangement
Lighting block
Bottom view
Top view
Terminal
arrangement
Lighting block
NC2
C2
Terminal
arrangement
Lighting block
NO1 NO2 NO3
3PDT
NC1 NC2 NC3
C1 C2 C3
---
LC+
Terminal
arrangement
---
Lighting block
LED Chameleon Models
(The terminal arrangement diagram shows a 1-switch output. Connections to terminals from the lighting block are the same for 2 outputs.)
Rated voltage
Model
24 VDC
Rectangular
A3PJ model
NO1
Square A3PA
model
L2−
NC1
L4−
C1
L3−
L1−
LC+
NO1 L1−
LC+
NC1 L2−
C1
Terminal Arrangement and Coloring
Chameleon Models
Wiring
Coloring
LC+
LC+
L1−
L2−
Green
Red
LC+
L1− and L2−
shorted
Orange
20
A3P
Dimensions
(Unit: mm)
Panel Cutout (If using a Switch Guard or Seal Cover, refer to the panel cutout diagrams on page 23.)
A3PJ (Rectangular) Models
Classification
Individual
mounting
(Horizontal)
Multiple
mounting
(Horizontal)
Flange
mount
models
Individual
mounting
(Vertical)
Mounting design
23.5±0.3
32±0.1
25±0.1
1
Barrier
mount
models
Mount to long
mounting plate
(A3PJ-3002)
before use.
32±0.1
1
2
Mount to long
mounting plate
(A3PJ-3002)
before use.
n
25n±0.5
Individual
mounting
(Horizontal)
27
Multiple
mounting
(Horizontal)
27
1
6 min.
30.5±0.3
25n−1.5 ±0.3
30.5±0.3
1
32.9n+3.5±0.3
n
2
23.5±0.3
Mount to long
mounting plate
(A3PJ-3002)
before use.
34
34
23.5±0.3
23.5±0.3
33n+6±1
Multiple
mounting
(Vertical)
3 min.
36.4±0.3
39
Individual
mounting
(Horizontal)
Panel cutout spacing between rows of Units:
23.5±0.3
32±0.1
Note: 1.
2.
3.
4.
32n−1.5 ±0.3
n
2
32n±0.5
32±0.1
Remarks
30.5±0.3
25±0.1
25±0.1
Multiple
mounting
(Vertical)
Panel cutout
2
n
26n+6±1
Mount to long
mounting plate
(A3PJ-3002)
before use.
For barrier mount models, refer to Accessories on
page 13.
Panel cutout spacing between rows of Units:
(Dotted line indicates the position of each mounting
barrier.)
29.4±0.3
1.3
30.5±0.3
6 min.
6 min.
25.9n+3.5±0.3
30.5±0.3
n: Number of Units
Recommended panel thickness: 1 to 5 mm
Mount the panel before mounting the Switch Guard.
If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
A3PA (Square) Models
Classification
Individual
mounting
Flange
mount
models
Mounting design
Panel cutout
3 min.
22.5±0.3
25±0.1
6 min.
Multiple
mounting
25±0.1
1
23.5±0.3
n
2
25n−2.5 ±0.3
25n±0.1
Individual
mounting
Barrier
mount
models
27.8±0.3
32
Multiple
mounting
27
Panel cutout spacing between rows of Units:
(Dotted line indicates the position of each mounting barrier.)
23.5±0.3
27
1
2
26n+6.5±1
Note: 1.
2.
3.
4.
Panel cutout spacing between rows of Units:
23.5±0.3
25±0.1
Remarks
n
1.3
6 min.
6 min.
23.5±0.3
26n+2.5±0.3
n: Number of Units
Recommended panel thickness: 1 to 5 mm
Mount the panel before mounting the Switch Guard.
If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
A3PT (Round) Models
6.4 dia.
+0.2
11.8R −0
29±0.3 dia.
Note: 1. Recommended panel thickness: 1 to 5 mm
2. If the panel is to be finished (e.g., coated), make sure that the panel
meets the specified dimensions after the coating.
4 min.
21
A3P
Dimensions
(Unit: mm)
Accessory Mounting Dimensions
Legend Plate
Rectangular Models
A3PJ-5201/-5202
Extractor
A3PJ-5080
Square Models
A3PA-5201/-5202
25.1
20
2.5
2.5
17.2
15
16.9
17.2
50
Plate surface 1.2
10
5
0.3
1.5
25±2
Note: Made from stainless steel.
1.5
24
Socket-mounting Dimensions
Rectangular Models A3PJ (M2PJ)
Square Models A3PA (M2PA)
Wire-wrap Terminal
A3PJ-4101
Wire-wrap Terminal
A3PA-4101
25.6
18
25.6
18
24
31.8
1 × 1 Wire-wrap Terminal
1 × 1 Wire-wrap Terminal
22.8
22.8
61.6
61.6
25.6
PCB Terminal
A3PJ-4102
18.5±0.8
PCB Terminal
A3PA-4102
18
18.5±0.8
25.6
18
3
1.2
3
1.2
24
31.8
0.3
0.3
22.8
22.8
61.6
61.6
0.5
3.6
PCB Cutout
(bottom view)
3.6
PCB Cutout
(bottom view)
0.5
1.5
17.4
8.7
5.2
2.05
10.4
17.6
10.5
8.65
1.25
3.5
7
6.15
8.8
5.25
8.4
Eleven, 1.5-dia. holes
Nine, 1.5-dia. holes
10.2
20.45
7 11.65
Solder Terminal
A3PJ-4103
25.6
Solder Terminal
A3PA-4103
25.6
18
3
31.8
18
3
Terminal Hole
Dimensions
Terminal Hole
Dimensions
0.8
0.8
0.3
24
0.3
3.2
3.2
3
3
0.9R
22.8
22.8
0.6R
61.6
61.6
8.2
0.9R
0.6R
8.2
Note: PCB cutout dimensions show the switch mounted to the socket with the OMRON logo facing down.
22
A3P
Dimensions
(Unit: mm)
Switch and Guard Mounting Dimensions
Rectangular Models
A3PJN-5050 (Horizontal Mounting)
A3PJN-5055 (Vertical Mounting)
Spring
25±0.1
52.6
52 max.
43.6
9.6
Square Models
A3PAN-5050 (Horizontal Mounting)
A3PAN-5055 (Vertical Mounting)
Spring
25±0.1
25.2
Switch Guard
(A3PJN-5050)
52.6
52 max.
43.6
9.6
25.4
25±0.1
32±0.1
Guard
Switch Guard
(A3AN-5050)
OMRON logo
OMRON logo
19.1
26.2±0.2
Panel Cutouts
Individual Mounting
(Horizontal)
Panel Cutouts
Individual Mounting
(Horizontal)
Multiple Mounting
(Horizontal)
Multiple Mounting
(Horizontal)
22.5±0.3
25n-2.5 ±0.3
32n-1.5 ±0.3
30.5±0.3
23.5±0.3
23.5±0.3
23.5±0.3
23.5±0.3
n = Number of mountings
n = Number of mountings
Note: Multiple vertical mounting is not possible.
Note: Multiple vertical mounting is not possible.
Seal Cover Mounting Dimensions
Rectangular Models
A3PJ-5060
Cover A (transparent) Cover B (black)
Seal Cover
(A3PJ-5060)
Square Models
A3PA-5060
Cover A (transparent) Cover B (black)
OMRON logo
32.5
Seal cover
(A3PA-5060)
OMRON logo
32.5
39.5
9.3
42.9
32.5
8.7
51.3 max.
51.9
Multiple Mounting
(Horizontal)
Panel Cutouts
Individual Mounting
(Horizontal)
42.9
51.3 max.
51.9
Panel Cutouts
Individual Mounting
Multiple Mounting
9.5 min.
22.5±0.3 10.5 min.
30.5±0.3
22.5±0.3
30.5±0.3
23.5±0.3
23.5±0.3
9.5 min.
23.5±0.3
23.5±0.3
9.5 min.
Note: 1. Recommended panel thickness: 1 to 5 mm
2. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions.
23
A3P
Safety Precautions
Refer to Safety Precautions for all Pushbutton Switches/Indicators.
Caution
When replacing the incandescent lamp, first turn
OFF the power supply, and then wait 10 minutes
before performing replacement, as the lamp is still
hot immediately after the power is turned OFF, so
there is a risk of burns.
Precautions for Correct Use
1. Always make sure that the power is turned OFF before mounting,
removing, or wiring the Switch, or performing maintenance.
Electric shock or fire may occur.
2. After wiring the Switch, make sure that there is a suitable isolation
distance.
Wiring
Using Microloads
• Using a standard load switch when a microload circuit is opened or
closed may cause contact failure on the contacts. Use the switch
within the operating range. (Refer to the diagram below.) Even
when using microload models within the operating range shown
below, if inrush current occurs when the contact is opened or
closed, it may cause the contact surface to become rough, and so
decrease life expectancy. Therefore, insert a contact protection
circuit where necessary. The minimum applicable load is the Nlevel reference value. This value indicates the malfunction
reference level for the reliability level of 60% (λ 60) (conforming to
JIS C5003). The equation, λ 60 = 0.5 x 10−6/time indicates that the
estimated malfunction rate is less than 1/2,000,000 with a reliability
level of 60%.
Voltage (V)
Do not apply a voltage higher than the maximum
rated operating voltage between the lamp
terminals, as there is a risk that the incandescent
lamp or LED will be damaged, and the Pushbutton
will be ejected.
30
26 mA 100 mA
0.15 mA
24
• Solder quickly and correctly at 350°C max and for 3 s or less.
Wait for one minute after soldering before exerting any external
force on the solder.
Operating Environment
Standard
load area
Microload
area
12
• Do not use in locations that are subject to dust, oil, or metal filings
as these may penetrate the interior of the Switch and cause
malfunction.
LED (for VDC)
Invalid
area
5
1 mA
100 mA 160 mA
0
• Check the terminal polarity when wiring.
• The rated voltage is shown on the plate on the back of the lighting
unit, so be sure to use within the voltage shown.
• An LED current-limiting resistor is built in, so there is no need to
mount an external resistor.
Incandescent Lamp
0.1
1
10
100
1,000
Current (mA)
Others
• If the panel is to be finished (e.g., coated), make sure that the panel
meets the specified dimensions after the coating.
• Apply 80% of the rated voltage (operating voltage) to the
incandescent lamp to improve life expectancy and incandescence.
Character Plate (Character Film)
• If preparing the character plate separately, use a heat-resistant film
with a thickness of 0.1 to 0.3 mm.
24.1 +0
−0.1
17.1 +0
−0.3
17.1 +0
−0.3
17.1 +0
−0.3
24.8 +0
dia.
−0.3
23.±0.1 dia.
5.2+0
−0.3
24
A3P
Assembly/Disassembly
A3PJ/M2PJ (Rectangular Models), A3PA/M2PA (Square Models)
Locking/Unlocking Positive Cap Lock Mechanism
Lock
Unlock
Positive cap stopper
Mounting Pushbutton
• Be sure to mount the Pushbutton with the correct orientation. Align
the groove on the Pushbutton, the projections in the Switch, and the
LED contact piece before pushing the Pushbutton into the Switch.
• When dismounting the Pushbutton, use the Extractor (A3PJ-5080)
for easy dismounting.
OMRON logo
Groove
Mounting and Replacing LED and Incandescent Lamps
If using an A3PA (square) model with one incandescent lamp, insert
the lamp in the center hole.
Note: Built-in LEDs cannot be replaced.
LED Rated Voltage Display (LED Models Only)
The LED rated voltage is shown between the built-in resistors on the
back of the lighting unit. Use within a range of ± 5%.
A3PJ
Rated
voltage display
A3PA
LED contact piece
Diagram shows A3PA model.
Removing/Mounting Cap
Insert the A3PA from the open side into the theft-prevention stopper.
Note: Display is on the back.
Mounting Switch onto Panel
Mounting Colored Plate
Place the colored plate on the plunger case with the dull side of the
colored plate facing downward.
With A3PJ split-screen models, be sure that the projections on the
upper surface of the colored plate face outward. For the A3PA, make
sure that the flat plate is facing upwards.
• Individual Mounting
and Barrier Mounting
When mounting the Switch,
push it into the panel cutout
from the front of the
mounting panel by holding it
with the logo mark
“OMRON” facing downward.
• Multiple Barrier Mounting (A3PJ)
When mounting a number of Switches in
line on the panel, link the Switches with
spacing barriers in between, attach
mounting barriers at both sides of this block
of Switches and, pushing in on the
mounting barriers at the side, insert the
Switches into the panel cutout together.
Flat plate
Projection
OMRON
logo
OMRON
logo
A3PA
A3PJ
Mounting Barriers
Mount each part by pushing it in the direction of the arrow shown in
the corresponding illustration below.
Mounting Character Plate (Character Frame) and Legend
Plate
Mount the legend plate for the A3PJ under the layered surfaces and
mount the cap, as shown below.
Barrier mounting
Transparent cap
Legend plate
(Character plate)
Colored plate
(Light baffle)
25
A3P
Mounting Seal Cover
After mounting the seal cover onto the flange of the Switch, push the
Switch into the panel cutout.
Inscribing the Legend Plate
• Inscribe the legend plate to a depth of 0.5 mm max.
• The legend plate is made from polycarbonate resin. To coat the
legend plate, use an alcohol-based coating such as melamine,
phthalic acid, or acrylic.
Maintenance Lock
1. First, when you insert the transparent lens while pressing the
center, the maintenance lock mechanism will be activated, and the
Switch will not operate. Lamp replacement and other maintenance
can be performed without turning OFF the power supply to devices
and equipment. Use an insertion force of 4 kg.
2. Next, when you remove your finger from the Switch, the lock will be
released.
3. The Switch will start to operate when the lighting unit is pressed the
second time.
26
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2015.9
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2015 All Right Reserved.
Similar pages