PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC773LC3B
v04.0514
MIXERS - SINGLE & DOUBLE BALANCED - SMT
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
Typical Applications
Features
The HMC773LC3B is ideal for:
Passive: No DC Bias Required
• Point-to-Point Radios
Input IP3: +22 dBm
• Point-to-Multi-Point Radios & VSAT
LO/RF Isolation: 38 dB
• Test Equipment & Sensors
Wide IF Bandwidth: DC - 8 GHz
• Military End-Use
12 Lead Ceramic 3x3 mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC773LC3B is a general purpose double
balanced mixer in a leadless RoHS compliant SMT
package that can be used as an upconverter or
downconverter between 6 and 26 GHz. This mixer
requires no external components or matching
circuitry. The HMC773LC3B provides excellent LO to
RF and LO to IF suppression due to optimized balun
structures. The mixer operates with LO drive levels
above +13 dBm. The HMC773LC3B eliminates the
need for wire bonding, allowing use of surface mount
manufacturing techniques.
Electrical Specifications, TA = +25° C, IF = 0.5 GHz, LO = +13 dBm*
Parameter
Min.
Typ.
Max.
Min.
Typ.
Frequency Range, RF & LO
6 - 16
16 - 26
Frequency Range, IF
DC - 8
DC - 8
Conversion Loss
9
LO to RF Isolation
37
12
9
Max.
Units
GHz
GHz
11
dB
39
dB
dB
LO to IF Isolation
31
37
21
32
RF to IF Isolation
5
11
10
20
dB
IP3 (Input)
17
22
dBm
IP2 (Input)
45
50
dBm
1 dB Gain Compression (Input)
10
11
dBm
* Unless otherwise noted, all measurements performed as downconverter, IF = 0.5 GHz
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC773LC3B
v04.0514
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
Conversion Gain vs. Temperature
Isolation
-10
-4
-8
-12
+25C
+85C
-40C
-16
-40
-60
6
10
14
18
FREQUENCY (GHz)
22
26
6
10
14
18
FREQUENCY (GHz)
22
26
Return Loss
Conversion Gain vs. LO Drive
0
0
-5
9 dBm
11 dBm
13 dBm
15 dBm
-4
RETURN LOSS (dB)
CONVERSION GAIN (dB)
LO/RF
RF/IF
LO/IF
-30
-50
-20
-8
-12
-16
-10
-15
-20
RF
LO
-25
-30
-20
-35
6
10
14
18
FREQUENCY (GHz)
22
26
6
10
14
18
FREQUENCY (GHz)
22
26
22
26
Upconverter Performance
Conversion Gain vs. LO Drive
IF Bandwidth
0
0
CONVERSION GAIN (dB)
Conversion Gain
IF Return Loss
-5
RESPONSE (dB)
-20
-10
-15
-20
-25
MIXERS - SINGLE & DOUBLE BALANCED - SMT
0
ISOLATION (dB)
CONVERSION GAIN (dB)
0
-4
-8
-12
9 dBm
11 dBm
13 dBm
15 dBm
-16
-20
0
2
4
6
8
FREQUENCY (GHz)
10
12
6
10
14
18
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
2
HMC773LC3B
v04.0514
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
30
25
25
20
20
IP3 (dBm)
IP3 (dBm)
Input IP3 vs. Temperature*
30
15
10
+25C
+85C
-40C
5
0
0
6
10
14
18
FREQUENCY (GHz)
22
26
6
80
70
70
60
60
50
50
IP2 (dBm)
80
40
30
9 dBm
11 dBm
13 dBm
15 dBm
20
10
10
14
18
FREQUENCY (GHz)
22
26
22
26
22
26
Input IP2 vs. Temperature *
Input IP2 vs. LO Drive *
IP2 (dBm)
15
10
9 dBm
11 dBm
13 dBm
15 dBm
5
40
30
+25C
+85C
-40C
20
10
0
0
6
10
14
18
FREQUENCY (GHz)
22
26
Input P1dB vs. LO Drive
6
20
16
16
12
8
11 dBm
13 dBm
15 dBm
4
10
14
18
FREQUENCY (GHz)
Input P1dB vs. Temperature
20
P1dB (dBm)
P1dB (dBm)
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Input IP3 vs. LO Drive *
12
8
+25C
+85C
-40C
4
0
0
6
10
14
18
FREQUENCY (GHz)
22
26
6
10
14
18
FREQUENCY (GHz)
* Two-tone input power = -5 dBm each tone, 1 MHz spacing.
3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC773LC3B
v04.0514
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
MxN Spurious Outputs
nLO
mRF
0
1
2
0
XX
14.5
1
0
0
2
69.0
3
>100
RF / IF Input
+21 dBm
LO Drive
+21 dBm
3
4
30.3
31.3
53.3
Channel Temperature
150 °C
21.6
22.5
46.7
210 mW
61.7
62.5
63.7
74.6
Continuous Pdiss (Ta = 85 °C)
(derate 3.3 mW/°C above 85 °C)
79.4
65.8
68.2
59.6
Thermal Resistance
(junction to ground paddle)
170 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
RF = 9 GHz @ -10 dBm
LO = 8 GHz @ +13 dBm
All values in dBc below the IF output power level.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR
LASER
MARK LOCATED APPROX. AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Absolute Maximum Ratings
Package Information
Part Number
Package Body Material
Lead Finish
HMC773LC3B
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H773
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
HMC773LC3B
v04.0514
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Pin Descriptions
5
Pin Number
Function
Description
1, 3, 7, 9, 10, 12
GND
These pins and package bottom must also be
connected to RF/DC ground.
2
LO
This pin is AC coupled and matched to 50 Ohms.
5
IF
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value has been chosen to pass the necessary
IF frequency range. For operation to DC, this pin must not
source or sink more than 2 mA of current or part non-function
and possible part failure will result.
8
RF
This pin is AC coupled and matched to 50 Ohms.
4, 6, 11
N/C
These pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC773LC3B
v04.0514
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
List of Materials for Evaluation PCB 125042
Item
Description
J1 - J2
SRI SMA Connector
J3
2.92mm PCB Mount K-Connector
U1
HMC773LC3B Mixer
PCB [2]
125040 Evaluation PCB
[1] Reference this number when ordering compete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Evaluation PCB
6