esd4dfn.pdf

05266
ESD4-DFN
Only One Name Means ProTek’Tion™
LOW CAPACITANCE TVS ARRAY
Description
The ESD4-DFN is a multi-line, low capacitance , 7pF @ 2.5V bias transient voltage suppressor array. This device is
designed to protect applications such as wireless telecommunication devices, PCMCIA cards and other portable
electronics from the damaging effects of ESD and EFT.
The ESD4-DFN has a working voltage of 5.0V and a minimum breakdown voltage of 6.0V. The ESD4-DFN is ideally
suited to protect 5V DC lines and data I/O ports against ESD and EFT and meets IEC 61000-4-2 (ESD) and IEC 610004-4 (EFT) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are
a major concern. Packaged in the DFN-4 plastic case, the ESD4-DFN should be placed near the connector to provide
maximum protection.
DFN-4 package
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• 25 Watts Peak Pulse Power per Line (tp = 8/20µs)
• ESD Protection > 25 kilovolts
• Protects up to 4 Data Lines
• RoHS Compliant
• REACH Compliant
• SMART Phones
• LCD Display Panel
• Portable Electronics
• SMART Cards
Mechanical characteristics
• Molded JEDEC DFN-4 Package
• Approximate Weight: 2 milligrams
• Lead-Free Nickel Paladium Gold
• Solder Reflow Temperature:
Nickel-Paladium-Gold: Ni/Pd/Au, 96/3.5/0.5: 260-270°C
• 8mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
PIN CONFIGURATION
05266.R2 9/12
4
3
1
2
Page 1
www.protekdevices.com
05266
ESD4-DFN
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Operating Temperature
Storage Temperature
SYMBOL
VALUE
UNITS
TA
-40 to 85
°C
TSTG
-55 to 150
°C
Soldering Temperature for 10 seconds
TL
265
°C
Typical Forward Voltage @ 10mA
VF
1.2
V
Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
25
Watts
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
ESD4-DFN
device
marking
4
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
reverse
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
(Note 1)
VWM
VOLTS
@ 1mA
V(BR)
VOLTS
@I P = 1A
VC
volts
@ 3V
ID
µA
@2.5V, 1MHz
C
pF
5.0
6.0
12.0
0.1
7
NoteS
1. 10pF @ 0V, 1MHz Typical.
05266.R2 9/12
Page 2
www.protekdevices.com
05266
ESD4-DFN
Only One Name Means ProTek’Tion™
typical device characteristics
figure 1
peak pulse power vs pulse time
PPP - Peak Pulse Power - Watts
1,000
100
25W, 8/20µs Waveform
10
1
0.1
1
10
100
td - Pulse Duration - µs
IPP - Peak Pulse Current - % of IPP
10,000
figure 2
pulse wave form
120
tf
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
Peak Value IPP
80
e-t
60
40
td = t/(IPP/2)
20
0
05266.R2 9/12
1,000
0
5
10
15
t - Time - µs
Page 3
20
25
30
www.protekdevices.com
05266
ESD4-DFN
Only One Name Means ProTek’Tion™
DFN-4 package information
A
outline dimensions
dim
millimeters
L1
inches
min
max
min
max
A
0.95
1.05
0.038
0.042
B
0.95
1.05
0.038
0.042
C
0.45
0.55
0.018
0.022
L1
0.20
0.30
0.008
0.012
L2
0.20
0.30
0.008
0.012
G1
0.25
0.35
0.010
0.014
G2
0.60
0.70
0.023
0.028
G3
0.05
0.15
0.002
0.006
P
0.45
0.55
0.018
0.022
L2
TOP VIEW
B
G3
G1
G2
BOTTOM VIEW
SIDE VIEW
C
P
NOTEs
1. Controlling dimension: millimeters.
2. Dimensioning and tolerances per ANSI Y14.M, 1985.
3. Dimension “B” applies to terminal and is measured between 0.25 and
0.30mm from terminal.
4. Coplanarity applies to the exposed pad as well as the terminals.
5. Dimension “P” is BSC.
A
C
pad layout dimensions
millimeters
inches
NOMINAL
NOMINAL
A
0.60
0.024
B
1.30
0.051
C
0.50 BSC
0.020 BSC
D
0.40
0.016
E
0.30
0.012
F
0.20
0.008
dim
F
B
D
E
NOTES
1. Controlling dimension: millimeters.
05266.R2 9/12
Page 4
www.protekdevices.com
05266
ESD4-DFN
Only One Name Means ProTek’Tion™
TAPE AND REEL
D
t
Top Cover
Tape
P2
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P0
A0
F
B0
K0
W
Pin 1
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178mm (7”)
8mm
A0
B0
K0
D
E
F
W
P0
P2
P
1.17 ± 0.10 1.17 ± 0.10 0.66 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10
tmax
0.25
Notes
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape.
Marking on Part - marking code (see page 2).
Package outline, pad layout and tape specifications per document number 06073.R1 3/11.
ORDERING INFORMATION
base PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
ESD4-DFN
-LF
-T73
3,000
7”
n/a
This device is only available in a Lead-Free configuration.
05266.R2 9/12
Page 5
www.protekdevices.com
05266
ESD4-DFN
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses
(NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05266.R2 9/12
Page 6
www.protekdevices.com