05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection against ESD, tertiary lightning and switching transients. This series offers low clamping voltage for the protection of sensitive components. The PSOTxxLC series has a peak pulse power of 500 Watts for an 8/20µs waveshape and is available in a SOT-23 package configuration. This series meets the IEC 61000-4-2, 61000-4-4 and IEC 61000-4-5 requirements. SOT-23 PACKAGE FEATURES APPLICATIONS • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGround) & Level 2(Line-Line) • 500 Watts Peak Pulse Power per Line(tp = 8/20µs) • Low Clamping Voltage • Ultra Low Capacitance • Available in Multiple Voltages Ranging from 3V to 36V • RoHS Compliant • REACH Compliant • Ethernet 10/100 Base T • Cellular Phones • FireWire • Audio/Video Inputs • Portable Electronics MECHANICAL CHARACTERISTICS • Molded JEDEC SOT-23 Package • Approximate Weight: 8 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 1 3 2 05066.R8 10/12 Page 1 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 500 Watts TL -55 to 150 °C TSTG -55 to 150 °C Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) DEVICE MARKING RATED STAND-OFF VOLTAGE MAXIMUM CLAMPING VOLTAGE (Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) @ I P = 5A VC VOLTS MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS MINIMUM BREAKDOWN VOLTAGE (Note 2) @ 1mA V(BR) VOLTS @V WM ID µA @0V, 1MHz C pF PSOT03LC 03L 3.3 4.0 7.0 9.0 125 5 PSOT05LC 05L 5.0 6.0 9.8 11.0 20 5 PSOT08LC 08L 8.0 8.5 13.4 15.0 10 5 PSOT12LC 12L 12.0 13.3 19.0 23.0 1 5 PSOT15LC 15L 15.0 16.7 24.0 28.0 1 5 PSOT24LC 24L 24.0 26.7 43.0 46.0 1 5 PSOT36LC 36L 36.0 40.0 51.0 68.0 1 5 NOTES 1. Positive potential is applied from pin 1 to 2; pin 2 is ground. 2. Do not test or surge from pin 2 to 1. PIV typically greater than 100V for rectifier diode. 05066.R8 10/12 Page 2 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 1,000 500W, 8/20µs Waveform 100 10 0.1 10 100 td - Pulse Duration - µs Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 10,000 FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1 0 05066.R8 10/12 5 10 15 t - Time - µs 20 25 0 30 Page 3 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PSOT03LC 40 5 Volts per Division 30 20 10 0 ESD Test Pulse - 7 kilovolt, 1/30ns (Waveshape) 05066.R8 10/12 Page 4 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ SPICE MODEL FIGURE 1 SPICE MODEL FOR I/O ABD LCRD Lg 0.6nH ABD - Avalanche Breakdown Diode (TVS) LCRD - Low Capacitance Rectifier Diode Lg - Lead Inductance TABLE 1 - SPICE PARAMETERS PARAMETER UNIT ABD(TVS) LCRD BV V See Table 2 200 IBV µA 1 0.01 Cjo pF See Table 2 5 IS A See Table 2 1E-14 PART NUMBER 05066.R8 10/12 Vj V 0.6 0.6 M - 0.33 0.33 N - 1 1 RS Ohms See Table 2 0.31 TT s 1E-8 1E-9 EG eV 1.11 1.11 TABLE 2 - ABD SPECIFIC SPICE PARAMETERS I S (AMPS) B V(VOLTS) Cjo(pF) Rs(OHMS) PSOT03LC 4.5 438 1E-11 0.21 PSOT05LC 6.0 284 1E-11 0.14 PSOT08LC 8.5 146 1E-11 0.28 PSOT12LC 13.3 123 1E-13 0.40 PSOT15LC 16.7 102 1E-13 0.52 PSOT12LC 26.7 61 1E-13 1.54 Page 5 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ APPLICATION INFORMATION I/O LINE 1 2 3 3 1 2 GND FIGURE 1 - COMMON MODE I/O PORT PROTECTION Two PSOTxxLC devices used in parallel. Circuit connectivity is as follows: • I/O Line connected to Device 1, Pin 1. • I/O Line connected to Device 2, Pin 2. • Device 1, Pin 2 connected to ground. • Device 2, Pin 1 connected to ground. • Device 1 and 2, Pin 3 not connected. Ethernet Transceiver I/O 1 1 2 3 3 1 2 I/O 2 FIGURE 1 - DIFFERENTIAL MODE ETHERNET PROTECTION Two PSOTxxLC devices used in parallel. Circuit connectivity is as follows: • I/O Line 1 connected to Device 1, Pin 1. • I/O Line 1 connected to Device 2, Pin 2. • I/O Line 2 connected to Device 1, Pin 1. • I/O Line 2 connected to Device 2, Pin 2. • Device 1 and 2, Pin 3 not connected. CIRCUIT BOARD RECOMMENDATIONS Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use dedicated ground planes 05066.R8 10/12 Page 6 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ SOT-23 PACKAGE INFORMATION OUTLINE DIMENSIONS DIM MILLIMETERS A L INCHES MIN MAX MIN MAX A 2.80 3.04 0.110 0.120 B 1.20 1.40 0.047 0.055 C 0.89 1.11 0.035 0.044 D 0.37 0.50 0.015 0.020 G 1.78 2.04 0.070 0.081 H 0.013 0.100 0.001 0.004 J 0.085 0.177 0.003 0.007 K 0.45 0.60 0.018 0.024 L 0.89 1.02 0.035 0.040 S 2.10 2.50 0.083 0.098 V 0.45 0.60 0.018 0.024 3 B 1 0°-10° S 2 K V J G C D H NOTES 1. 2. 3. 4. Controlling dimension: inches. Dimensioning and tolerances per ANSI Y14.5M, 1985. Pin 3 is the cathode (Unidirectional Only) Dimensions are exclusive of mold flash and metal burrs. A PAD LAYOUT DIMENSIONS DIM MILLIMETERS INCHES MIN MAX MIN MAX A 0.71 0.97 0.028 0.038 B 1.88 2.13 0.074 0.084 C 0.71 0.97 0.028 0.038 D 0.81 1.07 0.032 0.042 B NOTES D 1. Controlling dimension: inches. 05066.R8 10/12 C Page 7 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ TAPE AND REEL P0 t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 P2 D E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P tmax 3.15 ± 0.10 2.77 ± 0.10 1.30 ± 0.10 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.228 NOTES 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and date code. Package outline, pad layout and tape specifications per document number 06012.R2 8/10. ORDERING INFORMATION BASE PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY PSOTxxLC -LF -T7 3,000 7” n/a PSOTxxLC -LF -T13 10,000 13” n/a This device is only available in a Lead-Free configuration. 05066.R8 10/12 Page 8 www.protekdevices.com 05066 PSOT03LC - PSOT36LC Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05066.R8 10/12 Page 9 www.protekdevices.com