SURFACE MOUNT CHIP LED LAMPS BL-Hxxx7A (0402) Series 1.00(.039) 0.8(.031) 0.45(.018)±0.05 0.10(.004)±0.01 0.85(.033) R0 .05 R0 . 05 MA X 3° 0.18(.007)±0.03 Cathode Mark 0.50(.020) 0.70(.028)±0.02 0.80(.031)±0.02 GREEN MARK 0.21(.008) Cathode Mark ■ Absolute Maximum Ratings (Ta=25℃) UNIT Anode SPEC. Cathode 0.20(.008) 0.15(.006) 0.15(.006) 0.20(.008) For reflow soldering Polarity 0.400(.018) IF mA 20 IFp mA 100 VR V 5 Topr ℃ -40～+85 Tstg ℃ -40～+85 0.650(.026) 0.400(.018) 0.500(.197) NOTE: 1.All dimensions are in millimeters(inches). 2.Tolerance is ±0.10(.004") unless otherwise specified. 3.Specifications are subject to change without notice. Electro-optical Data (At 20mA) Chip Part No. Material Emitted Color λp(nm) λd(nm) BL-HGE37A AlGaInP Super Yellow Green 570 BL-HGK37A AlGaInP Green BL-HG437A InGaN BL-HG637A InGaN Lens Appearance Vf (V) Iv (mcd) Typ. Max. Min. Typ. 570 2.0 2.6 18.5 35.0 525 525 3.5 4.0 63.0 160.0 Bluish Green 505 505 3.5 4.0 63.0 120.0 Green 525 525 3.5 4.0 63.0 160.0 Water Clear 120˚ BL-HJC37A AlGaInP Super Amber 610 605 2.0 2.6 63.0 100.0 BL-HJE37A AlGaInP Super Orange Red 630 620 2.0 2.6 63.0 100.0 BL-HKC37A AlGaInP Super Yellow 590 589 2.0 2.6 63.0 120.0 BL-HUB37A AlGaInP Super Red 645 632 2.1 2.6 28.0 50.0 Chip Electro-optical Data (At 5mA) Lens Part No. Material BL-HB337A AlInGaN Emitted Color Super Blue λp(nm) 460 λd(nm) Vf (V) Appearance 465-470 Iv (mcd) Typ. Max. Min. Typ. 2.8 3.2 8.2 15.0 2.8 3.2 8.2 20.0 Water Clear BL-HB537A AlInGaN Super Blue 470 470-475 33 Viewing Angle 2 1/2 (deg) Viewing Angle 2 1/2 (deg) 120˚