24 Volt Datasheet

DATASHEET
ULTRA 31/900/24V & ULTRA 31/1100/24V ENGINE START MODULE
AVAILABLE NOW:
MAXWELL 24-VOLT
ENGINE START
MODULE (ESM) FOR
STARTING HEAVY
DUTY DIESEL
ENGINES
Give your customers increased starting reliability and equipment uptime with the new 24-Volt Engine Start Module
from Maxwell. Whether you build or maintain buses, bulldozers, off-road trucks, agricultural equipment, cranes, graders,
pavers, feller-bunchers, or portable compressors, we’ve got you covered with the high current 24-Volt cranking capacity
your customers need. Effectively eliminate jump-starts, lost productivity, drivers/operators on standby time, and equipment
downtime due to weak batteries.
Don’t leave starting to batteries. One Maxwell 24-Volt ESM takes over all engine cranking for engines up to 15 liters. And it
provides high speed cranking from -40°F to +149°F (-40°C to +65°C), all the time, every time for hundreds of thousands of
starts.*
ULTRA 31/900/24V Engine Start Module
ULTRA 31/1100/24V Engine Start Module
For heavy duty
vehicles and
equipment with
maximum engine
size 12.5 liters
For heavy duty
vehicles and
equipment with
maximum engine
size 15.0 liters
FEATURES & BENEFITS*
No lead. No acid.
Improves overall system power performance
Shock & vibration resistant
Built-in overcharge protection
Low total cost of ownership
Cold weather reliability down to -40°F (-40°C)
Faster cranking
Industry standard BCI Group 31 form factor
Recharges fully in less than 15 minutes
(Initial charge is 30 minutes or less)
Provides 900-1100 CCA1
4-year non pro-rated warranty
Assembled in the USA
Lead acid batteries still power ECM/ECU. Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the
warranty details for applicable operating and use requirements.
*
DATASHEET
ULTRA 31/900/24V & ULTRA 31/1100/24V ENGINE START MODULE
MAXWELL ENGINE START MODULE: PRODUCT SPECIFICATION COMPARISON
SPECIFICATIONS
ESM ULTRA 31/900/24V
ESM ULTRA 31/1100/24V
12.5 L
15.0 L
900 CCA
1100 CCA
45.5 kW
50.7 kW
Maximum engine size
Cold cranking amps
1
Peak power 2
Input voltage (B+ terminal)
9.5 V - 32.0 V
Output voltage
27.0 V max. (temperature dependent)
Designed for heavy equipment environments
-40°F to +149°F (-40°C to +65°C)
Operating temperature
20 A max. (from battery when charging)
< 10 mA (when fully charged - sleep mode)
Current draw (on batteries)
Recharge time
15 minutes
BCI Group 31
13”L x 6 13/16” W x 9 7/16” H
(330mm L x 173mm W x 240mm H)
Dimensions
Weight
7.8 kg (17 lbs)
Shelf life
8.2 kg (18 lbs)
4 years
FOOTNOTES
1. CCA =
28.5 V max. (temperature dependent)
C x (Vmax - Vmin)
T + C x ESR
2. Peak Power =
V2max
4 x ESR
ULTRA 31/900/24V
C = 300 F (min.)
Vmax = 27 V (for 0°C)
Vmin = 14.4 V (per SAE)
T = 3 seconds
ESR = 0.004 Ohm (max.)
ULTRA 31/1100/24V
C = 340 F (min.)
Vmax = 28.5 V (for 0°C)
Vmin = 14.4 V (per SAE)
T = 3 seconds
ESR = 0.004 Ohm (max.)
ESM 24V INSTALLATION DIAGRAMS
All 24V System
Split 12V/24V System
See user manual for full installation details.
Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice.
Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts:
6643119, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7580243, 7791860, 7791861, 7859826, 7883553, 7935155, 8072734, 8098481, 8279580, and patents pending.
*
CONTACT US
Maxwell Technologies, Inc.
Global Headquarters
3888 Calle Fortunada
San Diego, CA 92123
Phone: +1 (858) 503-3300
Fax: +1 (858) 503-3301
ESM Sales Support: +1 (877) 511-4324
ESM Technical/Warranty Support: +1 (888) 890-3337
Email: [email protected]
Web: maxwell.com/esm
MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either
trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission from Maxwell
Technologies, Inc. All contents copyright © 2015 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior
written permission from Maxwell Technologies, Inc.
Document number: 3000915-EN.2
maxwell.com/esm