56V Modules Datasheet

DATASHEET
56V MODULE
FEATURES AND BENEFITS*
TYPICAL APPLICATIONS
Up to 14 year DC life
56V DC working voltage
Resistive cell balancing
Overvoltage outputs
High power density
4U, half-rack package
UL registered
UPS systems
PRODUCT SPECIFICATIONS
ELECTRICAL
Rated Capacitance
BMOD0130 P056 B03
130 F
1
1
Minimum Capacitance, initial
130 F
Maximum Capacitance, initial
156 F
Maximum ESR DC, initial
1
8.1 mΩ
1
Test Current for Capacitance and ESRDC
100 A
1
Rated Voltage
56 V
Absolute Maximum Voltage2
62 V
Absolute Maximum Current
1,900 A
Leakage Current at 25°C, maximum
120 mA
3
Maximum Series Voltage
750 V
Capacitance of Individual Cells
Stored Energy, Individual Cell
3,000 F
9
3.0 Wh
9
Number of Cells
23
TEMPERATURE
Operating Temperature (Cell case temperature)
Minimum
-40oC
Maximum
40oC
Storage Temperature (Stored uncharged)
Minimum
-40oC
Maximum
70oC
*Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase.
See the warranty details and enclosed information for applicable operating and use requirements.
Page 1
Document number: 1017119.3
maxwell.com
DATASHEET
56V MODULE
PRODUCT SPECIFICATIONS (Cont’d)
PHYSICAL
BMOD0130 P056 B03
Mass, typical
18 kg
Power Terminals
M8/M10
Recommended Torque - Terminal
20/30 Nm
Vibration Specification
Telcordia GR-63-CORE Zone 4
Shock Specification
N/A
Environmental Protection
IP30
Cooling
Natural Convection
MONITORING / CELL VOLTAGE MANAGEMENT
Internal Temperature Sensor
N/A
Temperature Interface
N/A
Cell Voltage Monitoring
Overvoltage Alarm
Connector
Deutsch DTM
Cell Voltage Management
Passive
POWER & ENERGY
Usable Specific Power, Pd4
Impedance Match Specific Power, Pmax
2,600 W/kg
5,400 W/kg
5
Specific Energy, Emax6
Stored Energy
3.1 Wh/kg
57 Wh
7
SAFETY
Short Circuit Current, typical
6,900 A
(Current possible with short circuit from rated voltage.
Do not use as an operating current.)
Certifications
RoHS, UL810a (750 V)
High-Pot Capability10
Page 2
Document number: 1017119.3
4,000 V DC
maxwell.com
DATASHEET
56V MODULE
TYPICAL CHARACTERISTICS
THERMAL CHARACTERISTICS
Thermal Resistance
BMOD0130 P056 B03
0.50oC/W
(Rca, All Cell Cases to Ambient), typical8
Thermal Capacitance (Cth), typical
16,000 J/oC
Maximum Continuous Current (ΔT = 15oC)8
61 A, RMS
Maximum Continuous Current (ΔT = 40 C)
99 A, RMS
o
8
LIFE
DC Life at High Temperature1
(held continuously at Rated Voltage & Maximum Operating
Temperature)
8 years
Capacitance Change
20%
ESR Change
100%
(% decrease from minimum initial value)
(% increase from maximum initial value)
Projected DC Life at 25°C1
14 years
(held continuously at Rated Voltage)
Capacitance Change
20%
ESR Change
100%
(% decrease from minimum initial value)
(% increase from maximum initial value)
Shelf Life
4 years
(Stored uncharged at 25°C)
Page 3
Document number: 1017119.3
maxwell.com
DATASHEET
56V MODULE
ESR AND CAPACITANCE VS TEMPERATURE
180%
Capacitance
DC ESR
Percentage change from value at 25°C
170%
160%
150%
140%
130%
120%
110%
100%
90%
80%
-60
-40
-20
0
20
40
60
80
Temperature (°C)
NOTES
1. Capacitance and ESRDC measured at 25°C using
specified test current per waveform below.
2. Absolute maximum voltage, non-repeated. Not to
exceed 1 second.
3. After 72 hours at rated voltage. Initial leakage current
can be higher.
0.12V2
4. Per IEC 62391-2, Pd = ESRDC x mass
V2
5. Pmax = 4 x ESR x mass
DC
6. Emax =
½ CV2
3,600 x mass
2
7. Estored = ½ CV
3,600
Page 4
Document number: 1017119.3
maxwell.com
8. ∆T=IRMS2 x ESR x Rca
9. Per United Nations material classification UN3499, all
Maxwell ultracapacitors have less than 10 Wh capacity
to meet the requirements of Special Provisions
361. Both individual ultracapacitors and modules
composed of those ultracapacitors shipped by
Maxwell can be transported without being treated
as dangerous goods (hazardous materials) under
transportation regulations.
10. Duration = 60 seconds. Not intended as an operating
parameter.
DATASHEET
56V MODULE
MOUNTING RECOMMENDATIONS
MARKINGS
4 the user manual for installation
3
Please refer to
recommendations.
2
1
Products are marked
with the following information:
Rated capacitance, rated voltage, product number,
name of manufacturer, positive and negative terminal,
warning marking, serial number.
D
D
BMOD0130 P056 B03
M10 NEGATIVE
TERMINAL
LEFT SIDE
312.8±2.0
M8 POSITIVE
TERMINAL
20.0±1.0
TYP.
218.2 1.0
BMOD0130 P056 BO3 MONITOR
CABLE ONLY, 150 MIN
C
C
175
MAX
H
T
74.9 2
BRASS
INSERT
FACE
100.0±2.0
B
22
5.1±1.0
135.0 1.0
218.2 1.0
RIGHT SIDE
17.0±2.0
149.1±2.0
70.6 1.0
L
683 MAX
W
5.1±1.0
B
32.2±2.0
177 MAX
652.2±3.0
TYPICAL WIDTH FROM
BRASS INSERT FACE
Part Description
Dimensions (mm)
W (max)
H (max)
L (max)
BMOD0130 P056 B03
683
177
175
T (±2mm)
Package Quantity
74.9
1
A
A
BRASS INSERT
FACE
3
4
SIZE
CAGE CODE
B 68911
164.3±1.5
TYPICAL WIDTH FROM
BRASS INSERT FACE
BOTTOM
SCALE
2
1:5
DOC. NO.
PART NO.
108880, 109358
REV
1017268
2
SHEET
REV
2
2 OF 2
1
B-PG1 REV A 7/01
Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice.
Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following
U.S. patents and their respective foreign counterparts: 6643119, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7791860, 7791861, 7859826, 7883553,
7935155, 8072734, 8098481, 8279580, and patents pending.
Maxwell Technologies, Inc.
Global Headquarters
3888 Calle Fortunada
San Diego, CA 92123
USA
Tel: +1 858 503 3300
Fax: +1 858 503 3301
Maxwell Technologies SA
Route de Montena 65
CH-1728 Rossens
Switzerland
Tel: +41 (0)26 411 85 00
Fax: +41 (0)26 411 85 05
Maxwell Technologies, GmbH
Leopoldstrasse 244
80807 München
Germany
Tel: +49 (0)89 / 4161403 0
Fax: +49 (0)89 / 4161403 99
Maxwell Technologies
Shanghai Trading Co. Ltd.
Unit A2,C 12th Floor
Huarun Times Square
500 Zhangyang Road,
Pudong New Area
Shanghai 200122,
P.R. China
Phone: +86 21 3852 4000
Fax: +86 21 3852 4099
MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective
designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in
part, without the prior written permission from Maxwell Technologies, Inc. All contents copyright © 2013 Maxwell Technologies, Inc. All rights reserved. No
portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc.
Page 5
Document number: 1017119.3
maxwell.com
Maxwell Technologies Korea, Ltd.
Room 1524, D-Cube City
Office Tower, 15F #662
Gyeongin-Ro, Guro-Gu,
Seoul, 152-706
South Korea
Phone: +82 10 4518 9829
Similar pages