SM3300 Series L A B O R A T O R Y P O W E R S U P P LY FEATURES • 3300W Laboratory Supply • Ranges 0-18V to 0-660V and 0-220A to 0-5.5A • Designed for long life at full power • Excellent dynamic response to load changes • Protected against all overload and short circuit conditions • EMC surpasses CE requirements • Low audible noise - fans are temperature controlled • Available options: Software control and interfaces • High Speed Programming • Two-Quadrant Output - PowerSink Operation on single and three phase input voltages Large user display • menu driven operations • Durable digital encoders for voltage and current adjustment • Plug and play optional interfaces SPECIFICATIONS INPUT MECHANICAL Interlock Stacking of units allowed, air flow is from left to right. Screw Terminals for cable 2.5-4mm, 3phase + earth (no neutral required) M8 bolts RJ45 connector for Ethernet (LAN) at rear panel Input for contact at rear panel Enclosure IP20 Protection Dimensions 86 x 433 x 455mm Behind front panel (feet removed) 88.1 x 483mm, Front panel (19" 2U) Weight 15kg Input voltages 180-528Vac (1ph or 3ph) Input Frequency 48 - 62Hz Power Factor 0.99 Input Connector Internal Fuse 7.5A rms, 25AT Output Terminals OUTPUT Mounting Programming Connector Output Voltage Range 0-16V to 0-660V Auto ranging models See Selection Table Output Current Range 0-220A to 0-5.5A Auto ranging models See Selection Table Output Power Range 0 to 3300W See Selection Table ENVIRONMENTAL STANDARDS & APPROVALS Operating Temperature -20°C to +50°C (100% load) Derate output to 75% at 60°C Safety cTUVus/EN60950 / EN61010 Temperature coefficient 0.02%./°C EMC Storage temperature -40°C to 85°C. EN61204-3 Power Supply Standard EN61000-6-3 (EN55022B) Generic Emission EN61000-6-2 Generic Immunity Thermal Protection Output shuts down in case of insufficient cooling Humidity max 95% RH, non condensing, up to 40C max 75% RH, non condensing, up to 50C www.powerbox.com.au - 1800 251 380 www.powerbox.co.nz - 0800 104 480 Doc. No. SM3300 Rev.A 3-12-15 SM3300 Series L A B O R A T O R Y P O W E R S U P P LY SPECIFICATIONS OPERATING STANDARD FEATURES Remote ShutDown > with +5V, 1mA or relay contact Interlock Contact at rear of panel Indicators Voltage meter, Amp meter, AC-Fail, DC-Fail, Over Temperature, Power Sink Overload, Remote Shutdown, Remote-CV, Remote-CC, Output On,CV-limite, CV- and CC- mode Digital voltage and Current Setting Reliable, longlife digital encoders are implemented at the front panel. Includes total front panel lock (also for CV/CC knobs) and a coarse of fine pitch adjustment depending on the turning speed Ethernet Controller A 16 bit Ethernet interface for programming and monitoring Sequencer Arbitrary waveform generator or stand alone automation Controls High voltage isolation A higher output isolation allows series operation up to 1320V Series Operation USB-Input Front panel USB-input for exchange of settings and wave forms (host) Parallel Operation Max total current - No limit Master / Slave operation - max 4 units (including master) Remote Sensing Max volt, drop per load lead: 2V Limits Voltage adjust range: 0 - 102% Current adjust range: 0 - 102% AVAILABLE OPTIONS High Speed Programming A 10 to 20 times higher programming speed (down to 0.2ms rise time at full load) and lower output capacitance. Excellent for laser applications, test systems or as current source with low parallel capacitance as used in plasma chambers Software Control and Interfaces - Isolated Analog Programming - Serial RS232, RS485, RS422, USB (host) - Digital I/O - Master/Slave - Isolated contacts - PROFIBUS - CANBUS Mains on/off switch, CV and VV potmeter, CV and CC limit potmeter, Displlay Settings button, Display limits button, Remote/Local button, Output On/off button, Fron panel lock button Max total voltage 600V Master / Slave oeration yes From front panel: Standard .03% Potentiometers & Encoders Screw driver adj: Option P001 (at front panel) Digital Encoders: Option P220 Efficiency 87% Typical Isolation Input - Output: 3750Vrms(1 min) Creepage clearance; 8mm Input - Case: 2500Vrms Output - Case: 600VDC MTBF 500,000hrs SELECTION TABLE OUTPUT SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-11 Output Voltage Range 0 - 18V 0 - 66V 0 - 100V 0 - 330V 0 - 660V Output Current Range 0 - 220A 0 - 110A 0 - 75A 0 - 22A 0 - 11A Autoranging (2 Ranges) No Yes Yes Yes Yes Max Output Current/Voltage - 0-33V / 0-110A 0-50V / 0-75A 0-165V / 0-22A 0-330V / 0-11A - 0-66V / 0-55A 0-100V / 0-37.5A 0-330V / 0-11A 0-660V / 0-5.5A Meters 4 digit 4 digit 4 digit 4 digit 4 digit Scale voltage 0 - 18.00 V 0 - 66.0 V 0 - 100.0 V 0 - 300.0 V 0 - 600 V Scale current 0 - 220 A 0 - 110.0 A 0 - 75.0 A 0 - 22.0 A 0 - 11.00 A Accuracy 0.2% + 2 digit 0.2% + 2 digit 0.2% + 2 digit 0.2% + 2 digit 0.2% + 2 digit PROGRAMMING SPEED STANDARD VERSION SM 18-220 SM 66-AR-110 SM 100-AR-75 SM 330-AR-22 SM 660-AR-22 0 - 15 / 18V 4 / 5.5 ms 2.2 / 2.6 ms 0 - 33 V 1.6 ms 1 ms 0 - 50 V 3.8 ms 2 ms 0 - 165 V 3.8 ms 2 ms 0 - 330 V 4.2 ms 2.5 ms - 0 - 66 V 7 ms 3.7 ms 0 - 100 V 15 ms 8 ms 0 - 330 V 15 ms 8 ms 0 - 660 V 15 ms 7.5 ms 15/18V - 0 V 7 ms 32 ms 33 - 0 V 3 ms 33 ms 50 - 0 V 6 ms 65 ms 165 - 0 V 6 ms 65 ms 330 - 0 V 6 ms 70 ms - 66 - 0 V 11 ms 100ms 100 - 0 V 26 ms 260 ms 330 - 0 V 25 ms 250 ms 660 - 0 V 28 ms 270 ms RISE TIME (10 - 90%) Output voltage step Time, (load = 3300W) Time, (load = 330W) Output voltage step Time, (load = 3300W) Time, (load = 330W) FALL TIME (90 - 10%) Output voltage step Time, (load = 3300W) Time, (load 330W) Output voltage step Time, (load = 3300W) Time, (load = 330W) www.powerbox.com.au - 1800 251 380 www.powerbox.co.nz - 0800 104 480 Doc. No. SM3300 Rev.A 3-12-15 SM3300 Series L A B O R A T O R Y P O W E R S U P P LY TECHNICAL ILLUSTRATIONS www.powerbox.com.au - 1800 251 380 www.powerbox.co.nz - 0800 104 480 Doc. No. SM3300 Rev.A 3-12-15 SM3300 Series L A B O R A T O R Y P O W E R S U P P LY TECHNICAL ILLUSTRATIONS www.powerbox.com.au - 1800 251 380 www.powerbox.co.nz - 0800 104 480 Doc. No. SM3300 Rev.A 3-12-15