Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC648LP6 / 648LP6E v03.1109 Typical Applications Features The HMC648LP6(E) is ideal for: Low RMS Phase Error: 1.2° • EW Receivers Low Insertion Loss: 5 dB • Weather & Military Radar High Linearity: +45 dBm • Satellite Communications Positive Control Logic • Beamforming Modules 360° Coverage, LSB = 5.625° 28 Lead 6x6mm SMT Package: 36mm2 • Phase Cancellation Functional Diagram General Description The HMC648LP6(E) is a 6-bit digital phase shifter which is rated from 2.9 - 3.9 GHz, providing 360 degrees of phase coverage, with a LSB of 5.625 degrees. The HMC648LP6(E) features very low RMS phase error of 1.2 degrees and extremely low insertion loss variation of ±0.5 dB across all phase states. This high accuracy phase shifter is controlled with positive control logic of 0/+5V. The HMC648LP6(E) is housed in a compact 6x6 mm plastic leadless SMT package and is internally matched to 50 Ohms with no external components. 10 PHASE SHIFTERS - DIGITAL - SMT GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Electrical Specifi cations TA = +25° C, Vss= -5V, Vdd= +5V , Control Voltage= 0/ +5V, 50 Ohm System Parameter Frequency Range Min. Typ. 2.9 Insertion Loss* 5 Input Return Loss* 16 Output Return Loss* 17 Phase Error* ±5 RMS Phase Error Insertion Loss Variation* Max. Units 3.9 GHz 8 dB dB dB +10 / -15 1.2 deg ±0.5 dB Input Power for 1 dB Compression 31 dBm Input Third Order Intercept 45 dBm Control Voltage Current 35 250 μA Bias Control Current 5 15 mA *Note: Major States Shown 10 - 44 deg For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Insertion Loss, Major States Only Normalized Loss, Major States Only 0 4 3 NORMALIZED LOSS (dB) -4 -6 -8 -10 -12 2.4 2 1 0 -1 -2 -3 2.8 3.2 3.6 4 -4 2.4 4.4 2.8 FREQUENCY (GHz) Input Return Loss, Major States Only PHASE ERROR (degrees) RETURN LOSS (dB) 4.4 10 15 -10 -15 -20 -25 10 5 0 -5 -10 -15 2.8 3.2 3.6 4 -20 2.4 4.4 2.8 FREQUENCY (GHz) 3.2 3.6 4 4.4 4 4.4 FREQUENCY (GHz) Output Return Loss, Major States Only Relative Phase Shift Major States Including All Bits 0 RELATIVE PHASE SHIFT (degrees) 400 -5 RETURN LOSS (dB) 4 20 -5 -10 -15 -20 -25 -30 2.4 3.6 Phase Error, Major States Only 0 -30 2.4 3.2 FREQUENCY (GHz) 2.8 3.2 3.6 FREQUENCY (GHz) 4 4.4 350 300 250 200 150 PHASE SHIFTERS - DIGITAL - SMT INSERTION LOSS (dB) -2 100 50 0 2.4 2.8 3.2 3.6 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 45 HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Relative Phase Shift, RMS, Average, Max, All States Input IP3, Major States Only 60 15 55 RMS AVERAGE MAX 10 5 40 -5 35 3.1 3.3 3.5 3.7 30 2.9 3.9 3.1 FREQUENCY (GHz) 10 110 35 100 30 P1dB (dBm) IP2 (dBm) 40 90 80 70 3.7 3.9 3.7 3.9 25 20 15 3.1 3.3 3.5 3.7 10 2.9 3.9 3.1 FREQUENCY (GHz) 3.3 3.5 FREQUENCY (GHz) Insertion Loss vs. Temperature, Major States Only RMS Phase Error vs. Temperature 20 0 15 -2 INSERTION LOSS (dB) +25C +85C -40C 10 5 0 -5 -10 2.9 3.5 Input P1dB, Major States Only 120 60 2.9 3.3 FREQUENCY (GHz) Input IP2, Major States Only RELATIVE PHASE SHIFT (degrees) PHASE SHIFTERS - DIGITAL - SMT 45 0 -10 2.9 -4 -6 -8 -10 3.1 3.3 3.5 FREQUENCY (GHz) 10 - 46 50 IP3 (dBm) RELATIVE PHASE SHIFT (degrees) 20 3.7 3.9 -12 2.9 3.1 3.3 3.5 3.7 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 3.9 HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Phase Error vs. State 20 PHASE ERROR (degrees) 15 3.1, 3.3, 3.5, 3.7, 3.9 GHz 10 5 0 -5 2.9 GHz -10 -15 45 90 135 180 225 270 315 360 STATE (degrees) 10 Absolute Maximum Ratings Bias Voltage & Current Input Power (RFIN) 33 dBm (T= +85 °C) Vdd Idd Bias Voltage Range (Vdd) -0.2 to +12V 5.0 5.2mA Bias Voltage Range (Vss) +0.2 to -12V Vss Iss Channel Temperature (Tc) 150 °C -5.0 5.2mA Thermal Resistance (channel to ground paddle) 120 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Control Voltage State Bias Condition Low (0) 0 to 0.2 Vdc High (1) Vdd ±0.2 Vdc @ 35 μA Typ. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Truth Table Control Voltage Input Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Phase Shift (Degrees) RFIN - RFOUT 0 0 0 0 0 0 Reference* 1 0 0 0 0 0 5.625 0 1 0 0 0 0 11.25 0 0 1 0 0 0 22.5 0 0 0 1 0 0 45.0 0 0 0 0 1 0 90.0 0 0 0 0 0 1 180.0 1 1 1 1 1 1 354.375 PHASE SHIFTERS - DIGITAL - SMT 0 Any combination of the above states will provide a phase shift approximately equal to the sum of the bits selected. *Reference corresponds to monotonic setting For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 47 HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Outline Drawing PHASE SHIFTERS - DIGITAL - SMT 10 10 - 48 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC648LP6 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC648LP6E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H648 XXXX [2] H648 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Pin Descriptions Function Description 1 Vdd Voltage supply. 2, 20 GND These pins and exposed ground paddle must be connected to RF/DC ground. 3 RFIN This port is DC coupled and matched to 50 Ohms. 4 - 18 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 19 RFOUT This port is DC coupled and matched to 50 Ohms. 22 - 24, 26 - 28 BIT6, BIT5, BIT4, BIT3, BIT2, BIT1 Control Input. See truth table and control voltage tables. 25 Vss Voltage supply. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 PHASE SHIFTERS - DIGITAL - SMT Pin Number 10 - 49 HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Evaluation PCB PHASE SHIFTERS - DIGITAL - SMT 10 List of Materials for Evaluation PCB 117720 [1][3] Item Description J1 - J2 PCB Mount SMA RF Connector J3 Header 2mm, 16 Pin C1, C2 1000pF Capacitor, 0402 Pkg. U1 HMC648LP6(E) 6-Bit Digital Phase Shifter PCB [2] 117718 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [3] Please refer to part’s pin description and functional diagram for pin out assignments on evaluation board. 10 - 50 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC648LP6 / 648LP6E v03.1109 GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.9 - 3.9 GHz Notes: PHASE SHIFTERS - DIGITAL - SMT 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 51