Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC-C050 v01.0711 ULTRA LOW PHASE NOISE DISTRIBUTED AMPLIFIER, 2 - 18 GHz amplifiers 1 Features Ultra Low Phase Noise: -160 dBc/Hz @ 10 kHz Noise Figure: 5 dB Gain: 13.5 dB Output IP3: +22.5 dBm Typical Applications 50 Ohm Matched Input/Output The HMC-C050 is ideal for: Single Supply Voltage: +5V • Microwave Radio Hermetically Sealed Module • Military & Space Field Replaceable SMA Connectors • Test Instrumentation -55 °C to +85 °C Operating Temperature • VSAT General Description Functional Diagram The HMC-C050 is a GaAs HBT Ultra Low Noise Amplifier in a miniature, hermetic module designed to operate between 2 and 18 GHz. This high dynamic range amplifier module provides 13.5 dB of gain, 5 dB noise figure and up to +22.5 dBm of OIP3 with a single supply of +5V. The ultra low phase noise contribution of -160 dBc/Hz, enables superior modulation accuracy within transceiver architectures. The wideband distributed amplifier I/O’s are internally matched to 50 Ohms and DC blocked for robust performance. The module features removable SMA connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit. Electrical Specifications, TA = +25° C, Vdc = +5V Parameter Min. Frequency Range Gain Max. Min. 8 - 12.5 10.5 13.5 9.5 Typ. Max. Units 2 - 18 GHz 12.5 dB Gain Flatness ±1.2 ±2.2 dB Gain Variation Over Temperature 0.021 0.027 dB/ °C Noise Figure 4.5 6.5 dB Input Return Loss 18 16 dB Output Return Loss 17 15 dB Output Power for 1 dB Compression (P1dB) 13 dBm Saturated Output Power (Psat) 18.5 16 dBm Output Third Order Intercept (IP3) 22.5 20 dBm Phase Noise @ 100 Hz -140 -150 dBc/Hz Phase Noise @ 1 kHz -150 -150 dBc/Hz Phase Noise @ 10 kHz -160 -150 dBc/Hz Phase Noise @ 1 MHz -165 Supply Current 1-1 Typ. 13 15 80 8 -160 104 80 dBc/Hz 104 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com mA HMC-C050 v01.0711 ULTRA LOW PHASE NOISE DISTRIBUTED AMPLIFIER, 2 - 18 GHz 1 Gain vs. Temperature Gain & Return Loss Amplifiers 20 20 15 S21 S11 S22 0 GAIN (dB) RESPONSE (dB) 10 -10 10 -20 +25C +85C -55C 5 -30 0 -40 0 4 8 12 16 1 20 3 5 7 11 13 15 17 19 Output Return Loss vs. Temperature Input Return Loss vs. Temperature 0 0 RETURN LOSS (dB) +25C +85C -55C -10 -20 -30 -40 +25C +85C -55C -10 -20 -30 -40 1 3 5 7 9 11 13 15 17 19 1 3 5 7 FREQUENCY (GHz) 9 11 13 15 17 19 FREQUENCY (GHz) Noise Figure vs. Temperature 15 NOISE FIGURE (dB) RETURN LOSS (dB) 9 FREQUENCY (GHz) FREQUENCY (GHz) +25C +85C -55C 10 5 0 1 3 5 7 9 11 13 15 17 19 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 1-2 HMC-C050 v01.0711 1 ULTRA LOW PHASE NOISE DISTRIBUTED AMPLIFIER, 2 - 18 GHz P1dB vs. Temperature Psat vs. Temperature 25 20 Psat (dBm) 15 P1dB (dBm) amplifiers 20 10 +25C +85C -55C 5 15 +25C +85C -55C 10 5 0 0 1 3 5 7 9 11 13 15 17 1 19 3 5 7 9 11 13 15 17 19 FREQUENCY (GHz) FREQUENCY (GHz) Phase Noise at Pout = 0 dBm @ 2 GHz Output IP3 vs. Temperature 0 30 PHASE NOISE (dBc/Hz) -20 IP3 (dBm) 25 20 +25C +85C -55C 15 -40 -60 -80 -100 -120 -140 -160 -180 2 10 10 1 3 5 7 9 11 13 15 17 19 3 10 6 10 Phase Noise at Pout = 0 dBm @ 18 GHz 0 0 -20 -20 -40 -40 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) Phase Noise at Pout = 0 dBm @ 12 GHz -60 -80 -100 -120 -140 -160 -60 -80 -100 -120 -140 -160 3 10 4 10 FREQUENCY (Hz) 1-3 5 10 FREQUENCY (Hz) FREQUENCY (GHz) -180 2 10 4 10 5 10 6 10 -180 2 10 3 10 4 10 5 10 FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 6 10 HMC-C050 v01.0711 ULTRA LOW PHASE NOISE DISTRIBUTED AMPLIFIER, 2 - 18 GHz -40 -40 -60 -80 -100 -120 -140 Amplifiers 0 -20 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) 0 -20 -60 -80 -100 -120 -140 -160 -160 -180 2 10 3 10 4 10 5 10 -180 2 10 6 10 3 10 0 -20 -40 -40 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) 0 -20 -60 -80 -100 -120 -140 10 6 5 10 -60 -80 -100 -120 -140 -160 -160 3 10 4 10 5 10 -180 2 10 6 10 3 10 4 10 10 6 FREQUENCY (Hz) FREQUENCY (Hz) Phase Noise at P1dB @ 12 GHz Phase Noise at P1dB @ 18 GHz 0 0 -20 -20 -40 -40 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) 5 10 Phase Noise at P1dB @ 2 GHz Phase Noise at Psat @ 18 GHz -60 -80 -100 -120 -140 -160 -180 2 10 4 10 FREQUENCY (Hz) FREQUENCY (Hz) -180 2 10 1 Phase Noise at Psat @ 12 GHz Phase Noise at Psat @ 2 GHz -60 -80 -100 -120 -140 -160 3 10 4 10 FREQUENCY (Hz) 5 10 6 10 -180 2 10 3 10 4 10 5 10 6 10 FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 1-4 HMC-C050 v01.0711 amplifiers 1 ULTRA LOW PHASE NOISE DISTRIBUTED AMPLIFIER, 2 - 18 GHz Absolute Maximum Ratings Bias Supply Voltage (Vdc) +7V RF Input Power (RFIN) +15 dBm Continuous Pdiss (T = 85 °C) 0.65W Channel Temperature 175 °C Thermal Resistance 91.5 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Pin Descriptions 1-5 Pin Number Function Description 1 RFIN & RF Ground RF input connector, coaxial female, field replaceable. This pin is AC coupled and matched to 50 Ohms. 2 Vdc Power supply voltage for the amplifier. 3 RFOUT & RF Ground RF output connector, coaxial female, field replaceable. This pin is AC coupled and matched to 50 Ohms. 4 GND Power supply ground. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C050 v01.0711 ULTRA LOW PHASE NOISE DISTRIBUTED AMPLIFIER, 2 - 18 GHz J3 +V BIAS SUPPLY 0.03 [0.76] DIA PIN X 0.12 LG. 0.64 [16.26] 0.29 [7.38] 0.43 [10.87] 0.18 [4.57] 0.22 [5.54] GROUND 0.11 [2.79] J3 2X 0.35 [8.89] 0.59 [14.99] J1 0.70 [17.78] J2 #0-80 HARDWARE THRU .074 [1.88] DIA THRU (REMOVE HARDWARE TO MOUNT ASSEMBLY) Amplifiers 1 Outline Drawing 2X 0.38 [9.58] 0.42 [10.62] 1.39 [35.31] 2X FIELD REPLACEABLE SMA CONNECTORS. FEMALE LOT NO. SEE NOTE 7.0 2X 0.06 [1.52] 0.57 [14.48] 0.64 [16.26] REF 2X 0.073 [1.85] 0.094 [2.39] 2X 0.075 • • •• • •• • • •• •• • • • • • • • • • •[1.90] ••• X 0.05 LG 0.36 [9.14] 2X 0.18 [4.57] CHAMFER INDICATES ORIENTATION 2X R0.04 [R0.93] VIEW WITH SMA CONNECTORS AND BRACKET REMOVED. 2X 0.18 [4.57] 0.04 [1.02] Package Information Package Type C-1 Package Weight [1] 10.2 gms [2] Spacer Weight N/A [1] Includes the connectors [2] ±1 gms Tolerance NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. SPACER MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602-5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 1-6