Data Sheet

EURO QUARTZ
QF Series LVPECL VCXOs
'GPQF' LVPECL Output VCXOs
10MHz to 1450MHz
FEATURES
Low jitter <1.0ps phase jitter
Wide frequency Range 10.0MHz to 1450MHz
Low supply current <46mA (100MHz)
Very quick delivery leadtime
Supply voltage range 2.5V or 3.3Volts
Tristate function to conserve power
('536' package displayed)
Page 1 of 4
DESCRIPTION
'GPQF' series oscillators are a precision frequency control component,
providing a LVPECL output VCXO with low current consumption, a
wide frequency range with an integrated phase jitter performance of
1.0ps r.m.s. The part is available in two industry-standard packages,
7 x 5mm SMD and 5 x 3.2mm SMD.
CONTROL VOLTAGE FUNCTION (Pad 1)
GENERAL SPECIFICATION
Output Logic Type:
Frequency Range:
Load:
Power Supply Voltage:
Output Voltage 'HIGH':
Output Voltage 'LOW':
LVPECL
10.0MHz to 1450MHz
Differential
2.5±5%VDC or +3.3±10%VDC
VDD - 1.03V minimum
VDD - 0.6V maximum
VDD - 1.85V minimum
VDD - 1.6V maximum
±50ppm over -40° to +85°C*
50%±2%
150ps minimum**
250ps maximum**
Frequency Stability:
Duty Cycle:
Rise Time:
Fall Time:
Current Consumption @+2.5VDD
100.000MHz:
46mA
250.000MHz:
48mA
500.00MHz:
53mA
750.00MHz:
56mA
1GHz:
60mA
1.35GHz:
65mA
Current Consumption @+3.3VDD
100.000MHz:
48mA
250.000MHz:
50mA
500.00MHz:
55mA
750.00MHz:
59mA
1GHz:
62mA
1.35GHz:
68mA
Current with output disabled: 16mA typical
Start-up Time:
10ms maximum
Ageing:
±2ppm max., first year, ±10ppm
max. over 10 years.
OE Control on Pad 1
Enable:
0.7% VDD min., or no connection
Disable:
0.3%VDD max., (high impedance).
Output Enable Time:
200ns max.
Output Disable Time:
50ns max.
Phase Jitter r.m.s.:
0.6ps typical (12kHz to 20MHz)
<100fs (1.875MHz to 20MHz)
Supply Voltage (Vdd)
VCON Centre:
V. Control Range:
Absolute Pulling Range
(APR):
Linearity:
Transfer Function:
Absolute Voltage:
Input Impedance:
Bandwidth:
+2.5 Volts
+1.25 Volts
+0.2V~+2.3V
+3.3 Volts
+1.65 Volts
+0.3V~+3.0V
±70ppm
±3% typical, ±10% max.
Positive transfer
2.8 Volts Max.
4.0 Volts max.
1MΩ typical
50kHz min., measured at -3dB
PART NUMBERING
Example:
25GPQF536E-70A-100.00
Supply Voltage
25 = 2.5 Volts
3 = 3.3 Volts
Series/Model
'GPQF' = QF series,
LVPECL output
Package
536 = 5.0mm x 3.2mm
576 = 7.0mm x 5.0mm
Temperature Stability
'E' = ±50ppm over -40° to +85°C
Notes:
Pullability
70A = ±70ppm absolute pull range
Frequency in MHz
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk
EURO QUARTZ
QF Series LVPECL VCXOs
'GPQF' LVPECL Output VCXOs
10MHz to 1450MHz
Page 2 of 4
ABSOLUTE MAXIMUM RATINGS
+4.0V maximum
Power Supply Voltage (VDD)
Input Voltage
-0.5V min.; VDD+0.5V max.
Output Voltage
-0.5V min.; VDD+0.5V max.
-40°C min.; +125°C max.
Operation Junction Temperature
GPQF SERIES PHASE NOISE & PHASE JITTER DATA
GPQF SERIES PHASE NOISE & PHASE JITTER DATA
SSB
Phase
Noise
Data
(dBc/Hz
typical)
Frequency (MHz)
77.76
122.88
125.00
156.25
212.5
491.25
655.08
1000
1250
10Hz offset
100Hz offset
1kHz offset
10kHz offset
100kHz offset
-57
-94
-114
-123
-124
-68
-99
-113
-119
-120
-69
-97
-114
-124
-129
-67
-92
-112
-121
-124
-62
-93
-105
-116
-118
-61
-86
-100
-105
-105
-48
-85
-101
-102
-103
-52
-82
-93
-97
-97
-32
-68
-94
-103
-105
1MHz offset
-144
-140
-136
-136
-139
-126
-124
-116
-114
-152
-148
-154
-153
-143
-137
-133
-127
-136
0.9
0.8
1.1
0.9
1.0
1.1
1.2
1.5
1.1
5MHz offset
Phase Jitter (ps)
(12kHz ~ 20MHz. r.m.s.)
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk
EURO QUARTZ
QF Series LVPECL VCXOs
'GPQF' LVPECL Output VCXOs
10MHz to 1450MHz
Page 3 of 4
OUTLINE & DIMENSIONS
7.0 x 5.0mm SMD Package
5.0 x 3.2mm SMD Package
ENVIRONMENTAL PERFORMANCE SPECIFICATION
Environmental
Approvals
RoHS Compliant, Pb (lead) free in accordance with EU Directive 2002/95/EC 6/6
(2002/95EC) and WEEE (2002/96/EC).
Free of halide, cadmium, hexavalent chromium, lead, mercury, PBBs and PBDEs
Moisture sensitivity Level
Level 1 (infinite) according to IPC/JEDEC J-STF-020D.1
Second Level Interconnect
'e4
Storage Temperature Range
-55° to +125°C
Humidity
85%RH, 85°C, 48 hours
Fine Leak / Gross Leak
MIL-STD-202F Method 1014, Cond. A / MIL-STD-883, Method 1014, Cond C.
Solderability
Reflow
MIL-STD-202F method 208E
260°C for 10s. 2 times
Vibration
MIL-STD-202F Method 204, 35g, 50 to 2000Hz
Shock
Resistance to Solvents
Temperature Cyscling
ESD Rating
Pad Surface Finish
Weight of the Device
MIL-STD-202F, Method 213B, Test Cond. E, 1000gg 1/2 sine wave.
MIL-STD-202, Method 215
MIL-STD-883, Method 1010
Human Body Model (HBM): 1500 V minimum.
Gold (Au)(0.3µm ot 1.0µm) over nickel (Ni)(1.27µm to 8.89µm)
576 package: 0.18gm typical, 536 package: 0.09gm typical.
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk
EURO QUARTZ
QF Series LVPECL VCXOs
'GPQF' LVPECL Output VCXOs
10MHz to 1450MHz
Page 4 of 4
RECOMMENDED SOLDER TEMPERATURE PROFILE
Profile Feature
Preheat/Soak
- Temperature min. (Ts min.)
- Temperature max. (Ts max.)
- Time (ts) (Ts min. to Ts max.)
Sn-Pb Eutectic Assembly
Pb-Free Assembly
100°C
150°C
60 to 120 seconds
150°C
200°
60 to 180 seconds
Ramp-up Rate (TL to Tp)
3°C/second max.
3°C/second max.
Luiquidous temperature (TL)
183°C
217°C
Time (tL) maintained above TL
Peak package body temperature (Tp)
Time (Tp) within 5°C of the classification temperature Tc
60 to 150 seconds
60 to 150 seconds
235°C
10 to 30 seconds
260°C
20 to 40 seconds
Ramp-down rate (Tp to TL)
Time 25°C to peak temperature
6°C/second max.
6°C/second max.
6 minutes max.
8 minutes max.
TEST CIRCUIT
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk
Similar pages