Data Sheet

EURO QUARTZ
OCXO - OC11T12A
AT-Cut Crystal - Square Wave - 12.0 Volts
1.25MHz ~ 100.0MHz
Frequency Range 1.25MHz to 100.0MHz
25.4 x 25.4 x 16.0mm 5 pin metal, solder-sealed package
Supply Voltage 12.0 Volts
AT-Cut Crystal
Squarewave Output
EFC (Voltage control) as standard
OUTLINE & DIMENSIONS
DESCRIPTION
OC11T12A series oven-controlled crystal oscillators are close
tolerance OCXOs with good phase noise performance.
SPECIFICATION
Crystal Cut:
Output Waveform:
Supply Voltage:
Frequency Range:
Initial Calibration Tolerance:
Frequency Stability
over 0° to +60°C:
over -20° to +70°C:
over -40° to +85°C:
vs. Voltage Change:
vs. Ageing:
vs. Load Change:
Warm-up Time:
Voltage Control
Control Voltage Centre:
Freq. Deviation Range:
Control Voltage Range:
Transfer Function:
Input Impedance:
EFC Linearity:
Power Dissipation:
AT-cut
Square Wave
+12.0 VDC ±0.5V
1.25MHz to 100.0MHz
±0.5ppm max.(at VCON +2.5V)
±0.05ppm
±0.1ppm
±0.2ppm
<±20ppb for ±5% change
±5.0ppb max per day
±0.5ppm per first year
±3.0ppm over 10 years
<±20ppb for ±5% change
3 minutes max. to within
±0.5ppm of nominal freq.
+2.5 Volts (VCON)
±5.0ppm min., ±20ppm max.
ref. to 25°C and O.T.R.
2.5V ±2.0Volts
Positive: Increasing control
voltage increases output
frequency
100k minimum
±10% maximum
1.0W max. steady state
3.0W max. at turn on
Output
Load:
Output Logic HIGH:
Output Logic LOW:
Duty Cycle:
Rise/Fall Time:
Reference Voltage:
15pF HCMOS
+4.5V minimum
0.5V maximum
50%±10%
5ns max (20%~80%)
Frequency dependant
+4.0±0.3VDC or custom
Envionmental
Storage Temperature:
Shock:
Vibration:
-55° to +125°C
2000g, 0.3ms ½ sine
10 ~2000Hz / 10g
PHASE NOISE (at 10MHz)
Offset
1Hz
10Hz
100Hz
1kHz
10kHz
dBc/Hz
-75
-100
-130
-140
-150
TEST CIRCUIT
PART NUMBER FORMAT
Example:
OC11GT12A-10.000-0.1/-20+70
OCXO Package: OC11
RoHS Compliance
G: RoHS Compliant
Blank: Non-compliant
T: Output Squarewave
12: Supply Voltage 12.0Volts
A: AT-Cut Crystal
Nominal Frequency 10.0MHz
Stability in ±ppm
Operating Temperature Range °C
Lowest Temperature/Highest Temperature
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk