Data Sheet

EURO QUARTZ
CXOL OSCILLATOR
Ultra-low Current, Miniature Oscillator
32kHz ~ 100kHz
FEATURES
Ultra-low current consiumption
Typical start-up time of 200ms
Typical Rise/Fall times of 25ns
Hermetically sealed ceramic package
Optional output enable/disable with Tri-state
Full military testing per MIL PRF 55310 available
OUTLINE & DIMENSIONS
DESCRIPTION
CXOL oscillators are ultra-miniature (32. x 1.5mm), ultra-low current
quartz crystal oscillators with a typical start-up time of 200ms.
Hermetically sealed in a highy reliable ceramic housing, these
oscdillators are available over a wide range of input voltages (1.2V ~
5.0V).
SPECIFICATION
Frequency Range:
Supply Voltage:
Current Consumption:
32.0kHz to 100.0kHz
+1.2 Volts to +5.0 Volts ±10%
32.768kHz: 2.8µA
32.768kHz: 0.4µA
100.0kHz: 8.0µA
±20ppm, ±50ppm or ±100ppm
±1ppm/V
10pF
±2ppm
Standard: 5000g, 0.3ms, ½ sine
20g, 10~2000Hz swept sine
200ms
-10°C to+70°C (Commercial)
-40°C to +85°C (Industrial)
-55°C to +125°C (Military)
Calibration Tolerance:
Voltage Coefficient:
Output Load:
Ageing First Year:
Shock, Survival:
Vibration Survival:
Start-up Time:
Operating Temperature:
ENABLE/DISABLE OPTIONS
There are two Enable/Disable options available, 'T' and 'N'. The 'T'
version has a Tri-State output and continues oscillating internally
when the output is put into a high Z state. The 'N' version does not
have PAD 3 connected internally and so has no Tri-State capability.
The table below describes the Tri-State option 'T':
Disable (Pad 3 Low)
Enable (Pad 3 High)
Output
Int. Oscillator
Current
Frequency Output
High Z state
Oscillates
Oscillates
Normal
Lower than normal
When Pad 3 is allowed to float it is held high by an internal
pull-up resistor.
PACKAGING OPTIONS
CXOL oscillators are available either tray packed (<250pcs) or tape
and reel (>250 pieces).
12mm tape, 178mm or 330mm reels (EIA 418).
HOW TO ORDER CXOL SMD CRYSTAL OSCILLATORS
CXOL
3
Supply Voltage
1 = 1.8V
2 = 2.5V
3 = 3.0V
4 = 3.3V
5 = 5.0V
S
Blank = standard
S = special or
custom
N
-
SM3 -
T = Tri state
Terminations
N = No connection Blank
= SM1
= Gold plated
(Lead free)
SM2 = Solder plated
SM3 = Solder dipped
SM4 = Solder plated
(Lead free)
SM5 = Solder dipped
(Lead free)
32.768k ,
Frequency
k = kHz
50
Calibration
Tolerance
at 25°C
(in ±ppm)
/
C
Temp. Range
C = -10° ~ +70°C
I = -40° ~ +85°C
M = -55° ~ +125°C
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk
Similar pages