154B (Backside) Compensated media-isolated mV output pressure sensor

154BC

Low Cost

316L Stainless Steel or Titanium

19mm Diameter Package

0 - 100mV Output

Gage and Absolute

Wide Compensated Temperature Range
DESCRIPTION
The 154BC is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a
316L stainless steel or ASTM Grade 2 CP titanium housing. The 154BC is a low cost unit designed without a
header for o-ring mounting and OEM applications where compatibility with corrosive media is required. The
titanium option offers greater resistance to corrosive materials and harsh cleaning chemicals, opening the range
of its application use to things such as dialysis machines and salt/brackish water measurements.
The sensing package utilizes silicone oil to transfer pressure from either a 316L stainless steel or titanium
diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed
resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is included
which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%.
Please refer to the 154N uncompensated and constant voltage datasheets for more information on different
features of the 154.
FEATURES






APPLICATIONS
O-Ring Mount
-20ºC to +85ºC Compensated Temperature
1.0% Interchangeable Span
(provided by gain set resistor)
Solid State Reliability
±0.3% Pressure Non Linearity
Titanium Option






Medical Instruments (Dialysis Machines)
Process Control
Fresh, Waste, Salt and Brackish Water
Measurements
Refrigeration/Compressors
Pressure Transmitters
Hydraulic Controls
STANDARD RANGES
Range (psi)
Gage
0 to 015

0 to 030

0 to 050

0 to 100

0 to 300
154BC
Range (Bar)
Absolute
0 to 007

0 to 012

0 to 018

0 to 028


www.meas-spec.com
1/4
February 2015
154BC
PERFORMANCE SPECIFICATIONS
Supply Current: 1.5mA
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Span
75
100
150
mV
1
Zero Pressure Output
-1.0
0
1.0
mV
2
Pressure Non Linearity
-0.30
0.30
%Span
3
Pressure Hysteresis
-0.20
0.20
%Span
Repeatability
±0.02
Input Resistance
2.0
Output Resistance
3.5
%Span
5.8
kΩ
3.0
6.0
kΩ
Temperature Error – Span
-1.0
1.0
%Span
4
Temperature Error – Offset
-1.0
1.0
%Span
4
Thermal Hysteresis – Span
-0.25
±0.05
0.25
%Span
4
Thermal Hysteresis – Offset
-0.25
±0.05
0.25
%Span
4
Long Term Stability – Span
±0.10
Long Term Stability – Offset
±0.25
Supply Current
0.5
1.5
3
%Span/Year
%Span/Year
mA
5
Output Load Resistance
5
MΩ
6
Insulation Resistance (50Vdc)
50
MΩ
7
Output Noise (10Hz to 1kHz)
1.0
Response Time (10% to 90%)
0.1
2.0
uV p-p
ms
Overload Pressure
2X
Rated
8
Burst Pressure
3X
Rated
9
Compensated Temperature
-20
+85
°C
Operating Temperature
-40
+125
ºC
10
Storage Temperature
-50
+125
ºC
10
Media – Pressure Port
Liquids and Gases compatible with 316L Stainless Steel or ASTM Grade 2 CP Titanium
Notes
1. For amplified output circuits, 3.012V ±1% interchangeability with gain set resistor. See application schematic.
2. Measured at vacuum for absolute (A), ambient for gage (G).
3. Best fit straight line.
4. Over the compensated temperature range with respect to 25°C.
5. Guarantees output/input ratiometricity.
6. Load resistance to reduce measurement errors due to output loading.
7. Between case and sensing element.
8. 2X or 500psi, whichever is less. The maximum pressure that can be applied without changing the transducer’s performance or accuracy.
9. 3X or 600psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing
element or transducer.
10. Maximum temperature range for product with standard cable and connector is -20°C to +105°C.
154BC
www.meas-spec.com
2/4
February 2015
154BC
DIMENSIONS
154BC
www.meas-spec.com
3/4
February 2015
154BC
APPLICATION SCHEMATIC
ORDERING INFORMATION
154BC
-
S
-
100PG
-
C
Model
-
Material
-
Pressure Type and
Range
-
Electrical
154BC
-
-
P = Solder Pads
R = Ribbon Cable
C = Cable w/ Connector
S = 316L Stainless Steel
T = ASTM Grade 2 CP Ti
-
015PG
030PG
050PG
100PG
300PG
007BA
012BA
018BA
028BA
NORTH AMERICA
EUROPE
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: [email protected]
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: [email protected]
ASIA
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: [email protected]
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rig hts to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
154BC
www.meas-spec.com
4/4
February 2015
Similar pages