Download

Limit Switch Connectors
CSM_LimitSwitch_Connector_DS_E_6_2
Connectors (SC Series)
Cabtire cables and flexible tubes with various diameters are used to
connect machine tools and controllers with Limit Switches. To ensure
the watertightness of the edges of the conduits, use an SC Connector
that is suitable for the external diameter of cable and model of Limit
Switch.
Ordering Information
Connector for Cabtire Cable
Conduit
Applicable cable
Cabtire cable (generalpurpose)
JIS B 0202 G½
Cabtire cable (anticorrosive)
½-14NPT
Cabtire cable
Inner diameter (D)
of seal rubber
7 mm
9 mm
12.5 mm
14 mm
11 mm
7 mm
9 mm
12.5 mm
14 mm
11 mm
7 mm
9 mm
12.5 mm
14 mm
11 mm
External diameter of cable
Min.
Max.
5.5 mm
7.5 mm
7.5 mm
9.5 mm
11 mm
13 mm
12 mm
14 mm
9 mm
11 mm
5.5 mm
7.5 mm
7.5 mm
9.5 mm
11 mm
13 mm
12 mm
14 mm
9 mm
11 mm
5.5 mm
7.5 mm
7.5 mm
9.5 mm
11 mm
13 mm
12 mm
14 mm
9 mm
11 mm
Model
SC-1M
SC-2M
SC-3M
SC-4M
SC-5M
SC-21
SC-22
SC-23
SC-24
SC-25
SC-1PT
SC-2PT
SC-3PT
SC-4PT
SC-5PT
Applicable model
WL-N, WL, [email protected], [email protected],
ZE, ZV, ZV2, XE, XV, XV2
[email protected]
Note: Please use sealling tape with SC Connectors. SC-1M to SC-5M, however, are provided with an O-ring (NBR) and therefore sealing tape is not necessary to
ensure a proper seal.
Simple Connectors (Not Suitable for Locations Subject to Oil or Water)
Conduit
Applicable cable
JIS B 0202 G½
Pg13.5
JIS B 0202 G½
Cabtire cable
Inner diameter (D)
of seal rubber
External diameter of cable
Min.
Max.
Model
10.6 mm
8.5 mm
10.5 mm
SC-P2
9.6 mm
7.5 mm
9.5 mm
SC-P3
9 mm
7.5 mm
9 mm
SC-6
Applicable model
WL-N, WL, [email protected], [email protected],
ZE, ZV, ZV2, XE, XV, XV2
WL@-G
WL-N, WL, [email protected], D4N *,
[email protected] *, [email protected], ZE, ZV,
ZV2, XE, XV, XV2
Note: Simple connector are made of resin. If more sealing capability is required, use one of SC-1M to SC-5M, which have metal casings.
Models marked with an asterisk (*) however, can only be used with resin connectors.
1
Limit Switch Connectors
Dimensions and Structure
(Unit: mm)
Connectors for Cabtire Cable
As for models without an O-ring, please use sealing tape with SC Connectors.
Metal Models without O-ring
G½
SC-21 to 25
JIS B 0202 G½
14.6 dia.
*E
15
4.8
9
24
14 dia.
27.7
29.3
Ball head lock nut
(brass and nickel plating)
Washer (stainless steel)
Sealing rubber
(nitrile rubber)
Connector
(brass and nickel plating)
*D
(34)
Metal Models with O-ring
G½
SC-1M to 5M
14.6 dia.
*E
15
JIS B 0202 G½
5 9
29.3
27
14 dia.
Ball head lock nut
(zinc die-cast and zinc plating)
Washer (stainless steel)
*D
30
Sealing rubber (nitrile rubber)
(34)
Metal Models without O-ring
½-14NPT
(U.S.-standard screws)
SC-1PT to 5PT
14.6 dia.
14 dia.
15
Sealing rubber
(nitrile rubber)
Connector
(zinc die-cast and
zinc plating)
5
14
29.3
½-14NPT
24
14 dia.
Ball head lock nut
(zinc die-cast and zinc plating)
Washer (stainless steel)
Sealing rubber (nitrile rubber)
Connector
(zinc die-cast and
zinc plating)
*D
27.7
(39)
Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm.
Simple Connectors (Not Suitable for Locations Subject to Oil or Water)
Resin Models
G½
SC-P2
15
22
5
18 dia.
12.6 dia.
25.4
Resin Models
Pg13.5
SC-P3
15.5
5
21
Pg13.5
Hexagonal nut
(polyacetal resin)
4.5
Hexagonal nut
(polyacetal resin)
Conduit washer
(ferrous metal and
zinc plating)
Ring (chloroprene rubber)
18 dia.
10.6 dia.
1
Conduit washer
(ferrous metal and
zinc plating)
18 dia.
9.6 dia.
22.5
12
9
(30.6)
10
9
4.5
Ring (chloroprene rubber)
18 dia.
12 dia.
23.5
Resin Models
G½
SC-6
JIS B 0202
1
G½
12
5
9
Ball head lock nut
(polyacetal resin)
Washer
(ferrous metal and
zinc plating)
Sealing rubber (nitrile rubber)
Connector
(polyacetal resin)
*D
26
G½
M20 × 1.5
Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm.
* Diameter of Part Marked with Asterisk
Model
SC-21, -1M, -1PT
SC-22, -2M, -2PT
SC-23, -3M, -3PT
SC-24, -4M, 4PT
SC-25, -5M, -5PT
SC-6
Inner diameter (D)
of sealed rubber
7 mm
9 mm
12.5 mm
14 mm
11 mm
9 mm
Internal diameter
(E) of washer
10.4 mm
13.2 mm
14.6 mm
14.6 mm
13.2 mm
10 mm
Applicable cable
5.5 to 7.5-mm dia.
7.5 to 9.5-mm dia.
11 to 13-mm dia.
12 to 14-mm dia.
9 to 11-mm dia.
7.5 to 9-mm dia.
2
Limit Switch Connectors
[email protected]@ FA Connectors
The [email protected]@ is a snap-on connecting model that greatly reduces the time-consuming effort for wiring the Limit Switch. The [email protected]@ is
easily and quickly connected or disconnected and its degree of protection is IP67.
Ordering Information
FA Connector limit Switch
FA Connector
Connecting Cable
Crimp terminal
+
+
Number of
conductors
2
2
4
4
Voltage
Size of
specification
conduit
125 VDC
250 VAC
JIS B 0202
G½
125 VDC
250 VAC
FA Connectors
Model
SC-2F
SC-2FAD
SC-4F4D
SC-4F4AD
Size of crimp
terminal
Applicable
model
M4
WL
Connecting Cables
Straight Cable
Voltage
specification
Number of
conductors
2
AC
4
2
DC
4
Cable
length
2m
5m
2m
5m
2m
5m
2m
5m
Model
XS2F-A421-DB0-F
XS2F-A421-GB0-F
XS2F-A421-D90-F
XS2F-A421-G90-F
XS2F-D421-DD0
XS2F-D421-GD0
XS2F-D421-D80-F
XS2F-D421-G80-F
Connections to Sensor I/O Connectors
Voltage
specification
Number of
conductors
FA Connector
Sensor I/O Connector
Connection
SC-2FAD
[email protected]
↑
D: 2-m cord
G: 5-m cord
Brown
Blue
Brown
Blue
4
SC-4F4AD
[email protected]
↑
D: 2-m cord
G: 5-m cord
Brown
White
Blue
Black
Brown
White
Blue
Black
2
SC-2F
[email protected]
↑
D: 2-m cord
G: 5-m cord
Brown
Blue
Blue
Brown
SC-4F4D
[email protected]
↑
D: 2-m cord
G: 5-m cord
Red
Brown
Black
White
Brown
White
Blue
Black
2
AC
DC
4
3
Limit Switch Connectors
Dimensions
(Unit: mm)
SC-2F
8.5 4 10
27
Built-in DC connector
JIS B0202 G½
Brown (3)
M4 crimp terminal
1
4
2
.
30
SC-2FAD
dia
3
Blue (4)
M12 × 1
61 ±5
8.5
27
4
10
Built-in AC connector
JIS B0202 G½
Brown (3)
M4 crimp terminal
1
4
2
.
30
SC-4F4AD
dia
Blue (4)
M12 × 1
3
61 ±5
8.5
27
4
10
Built-in AC connector
JIS B0202 G½
Brown (1)
Blue (3)
M4 crimp terminal
1
4
2
30
SC-4F4D
.
dia
Black (4)
M12 × 1
8.5
27
3
White (2)
46 ±5
61 ±5
4
10
Built-in DC connector
JIS B0202 G½
Red (1)
Black (3)
M4 crimp terminal
1
4
2
.
30
dia
White (4)
Brown (2)
M12 × 1
3
46 ±5
56 ±5
Note: 1. Each dimension has a tolerance of ±0.4 mm unless otherwise specified.
2. Figures in parentheses are connector pin numbers.
Safety Precautions
Precautions for Correct Use
Conduits
Connector for Cabtire Cable/Flexible Tube
G½, ½-14NPT
To connect a Limit Switch with a connector, insert a rubber ring first
and then a washer into the conduit inlet of the switch body, put a
rubber seal, washer, and nut in this order onto the tapered part of the
connector and tighten the nut securely. Then tighten the conduit inlet
with the connector to maintain high sealing capability. Apply sealing
tape to the edge of the connector on the conduit inlet side to increase
sealing capability.
The SC-1M to SC-5M are provided with an O-ring, and so the
rubber ring, conduit washer, and sealing tape are not required.
SC-P2
Cover Rubber ring
Washer for conduit
Cabtire cable
Connector Rubber seal Washer Ball head lock nut
Switch box
Conduit inlet
JIS B0202 G½
½-14NPT
SC-21 to 25
SC-1M to 5M
SC-1PT to 5PT
4
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2015.8
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2015 All Right Reserved.
Similar pages