EURO QUARTZ CX-2 CRYSTAL Low Profile Miniature Crystal 9.6MHz to 160MHz FEATURES Low profile, hermetically sealed ceramic package Excellent ageing characteristics High shock resistance Full military testing available Available with glass or ceramic lid Custom designs available OUTLINE & DIMENSIONS DESCRIPTION CX-2 AT crystals are designed in a rugged, ceramic package. Due to its robust design this crystal has gained wide acceptance in the industry. SPECIFICATION Specifications stated are typical at 25°C unless otherwise indicated. Specifications may change without notice. Fundamental Frequency: Motional Resistance R (Ω): Motional Capacitance C1 (fF): 10.0MHz 60 2.8 32.0MHz 20 7.8 155.52MHz 50 0.5 95 1.4 36 2.4 41 3.2 QualityFactor Q (k): Shunt Capacitance C0 (pF): Calibration Tolerance1: Load Capacitance: Drive Level: Temperature Stability2 Commercial -10 ~ +60°C: Industrial -40 to +85°C: Military -55 to +125°C: Ageing, first year: Shock, survival3: Vibration, survival: Operating Temperature Range Commercial: Industrial: Military: Storage Temperature Range: Maximum Process Temperature: A = ±0.01% (±100ppm) B = ±0.1% C = ±1% 20pF (Unless specified by customer) 500µW maximum from ±10ppm from ±20ppm from ±30ppm 5ppm maximum 3,000g, 0.2ms, ½ sine 20g, 10~2000Hz random -10° to +70°C -40° to +85°C -55 to +125°C -55° to +125°C See package handling notes PACKAGE HANDLING Note: The characteristics of the frequency temperature stability follow that of AT-Cut Thickness Shear mode. 1. Tighter tolerances available. 2. Does not include calibration tolerance. 3. Higher shock version available The CX crystal is hermetically sealed in a ceramic package. Normal handling and soldering precautions for small, low thermal mass parts are adequate when installing or testing CX crystals. CX crystals may be wave soldered with proper precaution taken to avoid desoldering the leads. A slow machine rate or too high a pre-heat temperature or solder bath temperature may damage the crystals. Lead to package solder interface temperature should not exceed 175°C, glass lid to package seal rim temperature should not exceed 210°C. If the seal rim reaches temperatures above the maximum specified, the package may lose its hermeticity. Loss of hermeticity results in a frequency decrease and motional resistance increase. HOW TO ORDER CX-2 LEADED CRYSTALS CX-2 - S - 'S' if special, custom design. Otherwise leave blank OT OT = 3rd Overtone Mode. Blank = Fundamental Mode - C - Blank = glass lid C = ceramic lid 03 - 32MHz, Side Leads Frequency K = kHz M = MHz A / 25 / Calibration Frequency Stability Tolerance over temp. @25°C (in ppm) A B C I Temp. Range C = -10° ~ +70°C I = -40° ~ +85°C M = -55° ~ +125°C S = Customer specified EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk