HSMC INTERCONNECT BOARD CYUSB3ACC-003 Top View Bottom View HSMC INTERCONNECT BOARD CYUSB3ACC-003 1. Connect the EZ-USB® FX3TM Development Kit (CYUBS3KIT-001) to the Altera® FPGA board using the HSMC interconnect board (CYUSB3ACC-003), as shown below Altera FPGA Board CYUSB3KIT-001 CYUSB3ACC-003 2. Learn to use FX3 in applications involving Altera FPGA with the application note AN65974 - Designing with the EZ-USB FX3 Slave FIFO Interface available at http://www.cypress.com/go/AN65974 For the latest information about this interconnect board and to download the hardware files, visit www.cypress.com/go/CYUSB3ACC-003 For the latest information about the EZ-USB FX3 Development Kit (CYUSB3KIT-001) and to download the kit software and hardware files, visit www.cypress.com/go/CYUSB3KIT-001 © 2014 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc.# 001-92795 Rev.**