.218 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 40AMPS .315 90° .869 .188±.001 DRAWN JWH APPROVED JMC DATE 05/03/00 DATE 05/03/00 SCALE: 6:1 DATE APPROVED 05/02/00 JED DATE APPROVED 05/03/00 KJT CUSTOMER DRAWING ANGLES: ± 2° PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.254 .XXX [X.XX] ± .005 [0.127] REVISED AND REDRAWN PER ECR-ER1655 DESCRIPTION BY APPD DATE A SD220-510-0000G SHT 1 OF 1 RDM PLUG, HIGH POWER F REV Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 WinchesterElectronics CATALOG P/N: 220-510-0000G +.000 .142 - .003 F REV ANG CT 12/05/06 CABLE TRIM DIMENSIONS .188 3. FINISH SPECIFICATIONS: BODY: .000030 MIN. GOLD PER ASTM B488 OVER .000080 MIN. NICKEL PER AMS-QQ-N-290 SPRING WASHER:.000005 MIN. GOLD PER ASTM B488 OVER .000080 MIN. PER AMS-QQ-N-290 CLIP RING: .000100 MIN. NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 2. MATERIAL SPECIFICATIONS: BODY: BRASS PER ASTM B16 SPRING WASHER: PHOSPHOR BRONZE PER ASTM B103 CLIP RING: BERYLLIUM COPPER PER ASTM B194 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD22-0000. NOTES: UNLESS OTHERWISE SPECIFIED PSM 12/05/06 June 2006 - This drawing became the property of Winchester Electronics Corporation, Wallingford, CT.