® ISOCOM LTD IECQ QC 88000-C001 COMPONENT ISSUE 8 SPECIFICATION May 2013 Component Specification For Ceramic Hermetically Sealed Transistor Optocouplers M1077 IECQ IECQ Product Certificate Number E1280/F Up-to-date lists and bibliographical references of IECQ publications may be downloaded from www.iecq.org Further copies of this document may be obtained from: IEC International Electrotechnical Commission Commission Electrotechnique Internationale Box 131, rue de Varembé, CH 1211 Geneva 20, Switzerland For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 1 of 12 QC 88000-C001: 2013 ® ISOCOM LTD FOREWORD The IECQ Quality Assessment System for Electronic Components (IECQ) is composed of those member countries of the International Electrotechnical Commission (IEC) who wish to take part in a harmonized system for electronic components of assessed quality. IECQ is also known in some European member countries as IECQ-CECC. The object of the System is to facilitate international trade by the harmonization of the specifications and quality assessment procedures for electronic components, and by the grant of an internationally recognised Mark, or Certificate of Conformity. The components produced or services provided under the system are thereby acceptable in all member countries without further testing. This Component Specification is based upon the requirements of IECQ 03-3, Annex E (QC 001002-2 Amendment 1, Clause 5.4) and has been prepared by: Isocom Ltd 48 Hutton Close Crowther Industrial Estate Washington Tyne and Wear NE38 0AH United Kingdom Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 and published under the authority of: BSI Group Kitemark Court, Davy Avenue Knowlhill, Milton Keynes MK5 8PP United Kingdom AMENDMENT RECORD Issue 1 - Changed Page 10 – Amendments 25/06/09 Issue 2 - Changed Page 4 – Amendments 22/03/10 Issue 3 - Changed Pages 4 & 6 – Updated Drawings 25/06/10 Issue 4 - Changed Pages 3 & 4 – Added devices IS49 & 4N49 05/07/10 Issue 5 - Changed Pages 3, 4, 5, 6, 7 & 10 – RoHS Compliant, Added CSM165-2 & Amendments 13/07/10 Issue 6 – Changed pages 4 & 7, added CH301A and 4/5 pin hybrid outline drawing 26/5/11 Issue 7 – Changed pages 3, added text CH301A and CSM166-4 & page 4, added text CH301A 30/5/13 REQUIREMENTS The requirements for IECQ Component Specifications as detailed in IECQ 03-3, Annex E (QC 001002-2 Amendment 1, Clause 5.4) are satisfied by the following data sheet. It should note that IECQ are not responsible for manufacturers declarations made in data sheets which fall outside the limits of approved detailed in IECQ certificates. This Component Specification is intended for use with applicable IECQ Assessment Specifications. Eg: QC 88000A0001 For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 2 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Ceramic Hermetically Sealed Transistor Optocouplers ■ ■ ■ ■ ■ ■ ■ ■ 4N24 4N49 CD500/501 CH300 CH301A CS200/201 CS224 CSM200 ■ ■ ■ ■ ■ ■ ■ CSM1200 CSM1224 CSM165-2 CSM165-4 CSM166-4 CSM2224 IS49 Features Applications ▪ Released to IECQ ▪ Military, high reliability system ▪ Hermetically Sealed ▪ Medical instruments ▪ High Density Packaging ▪ Mos, Cmos Applications ▪ 1500V DC withstand Test Voltage ▪ Logic Interfacing ▪ Low Input Requirements ▪ Data Transmission ▪ High Current Transfer Ratio ▪ Power Supply ▪ RoHS Compliant ▪ Modems Description These devices are single, dual and quad, hermetically sealed optocouplers. Each channel is composed of an infra-red emitting diode and a silicon phototransistor. Package styles for these devices include 6 pin, 8 pin, 16 pin flat pack, and hybrid 4 pin, with surface mount, butt cut and gull wing options available. The same electrical die, assembly processes and materials are used for each channel of each device shown below. Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 3 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Selection Guide Package Styles and Configuration Options Package 4 pin Hybrid Lead Style Channels 1 Common Channel Wiring Isocom Part Numbers and Options CH300 CH301A Commercial CH300/L2 Defense Screen Level CH301A/L2 CH300/L2S Space Screen Level CH301A/L2S Standard Gold Plate Finish Solder Dipped Butt Cut/Gold Plate Gull Wing/Soldered Crew Cut/Gold Plate Metal Can 6 pin LCC 6 pin DIP 8 pin DIP 16 pin Flat Pack 1 1 1 2 2/4 4N24 4N49 4N24/L2 4N49/L2 4N24/L2S 4N49/L2S Gold Plate Option 20 CSM200, IS49 CSM1200/1244/2224 CSM200/L2, IS49/L2 CSM1200/1244/2224/L2 CSM200/L2S, IS49/L2S CSM1200/1244/2224/L2S CS200/201 CS224 CM200/201/L2 CS224/L2 CS200/201/L2S CS224/L2S CD500 CD501 CD500/L2 CD501/L2 CD500/L2S CD501/L2S CSM165 CSM166 CSM165/L2 CSM166/L2 CSM165/L2S CSM166/L2S Gold Plate Option 20 Gold Plate Option 20 Option 10 Option 30 Option 60 Gold Plate Option 20 Option 10 Option 30 Option 60 Gold Plate Option 20 Functional Diagrams CH300 CH301A CS200/201 CSM200 CSM1224 IS49 CD500 CD501 CSM165-2 4/5 pin Hybrid 1 Channel 6 pin DIP 1 Channel 6 pin LCC 1 Channel 6 pin LCC 1 Channel 8 pin DIP 2 Channel 16 pin Flat Pack *2 Channel 1 2 6 6 5 1 5 4 4 3 4N24 4N49 CS224 CSM1200 CSM2224 CSM166-4 CSM165-4 6 pin TO-5 1 Channel 6 pin DIP 1 Channel ** 6 pin LCC 1 Channel 6 pin LCC 1 Channel 16 pin Flat Pack 4 Channel 16 pin Flat Pack 4 Channel 5 3 2 1 7 * ** 6 5 6 1 4 1 5 4 3 3 Note 2 channel is only for circuit of 2 middle channels 2 & 3 channel on the circuits. See Outline Drawings 6 Terminal LCC Surface Mount, 1 Channel For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 4 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Outline Drawings 16 pin Flat Pack, 2 and 4 Channel 7.24 (0.285) 6.99 (0.275) 2.29 (0.09) max 11.13 (0.438) 10.72 (0.422) 1.27 (0.05) Ref 0.46 (0.018) 0.36 (0.014) 8.13 (0.32) Max 2.85 (0.112) Max 0.88 (0.0345) Min 0.89 (0.035) 0.69 (0.027) 5.23 (0.206) Max 0.31 (0.012) 0.23 (0.009) 9.02 (0.355) 8.76 (0.345) NOTE: DIMENSIONS IN MILLIMETERS 8 pin DIP 2 Channel 9.40 (0.370) 9.91 (0.39) 8.13 (0.32) Max 0.76 (0.03) 1.27 (0.05) 7.16 (0.282) 7.57 (0.298) 0.51 (0.020) Min 3.81 (0.15) Min 2.29 (0.09) 2.79 (0.11) 4.32 (0.17) Max 0.51 (0.02) Max 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) NOTE: DIMENSIONS IN MILLIMETERS For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 5 of 12 QC 88000-C001: 2013 ® ISOCOM LTD 6 pin TO-5, 1 Channel 6 LEADS 0.0175 (0.445) 0.040(1.02) 45. 0° 0.32 (8.13) 5 3 0.037 (0.935) 6 7 2 1 0.5 (12.70) 0.022 (5.08) 0.031 (0.787) 0.17 (4.32) 6 pin DIP 1 channel 8.94 9.34 7.62 8.12 2.8 MIN 1.37 TYP 7.16 7.56 0.22 0.3 0.63 1.14 3.5 MIN 2.54 0.4 0.5 NOTE: DIMENSIONS IN MILLIMETERS 6 Terminal LCC Surface Mount, 1 Channel 6.223 4.318 1.67 1.651 2.286 0.635 1.27 2.54 0.762 0.635 R = 0.2286 For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 6 of 12 QC 88000-C001: 2013 ® ISOCOM LTD ** 4/5 Terminal Hybrid, 1 Channel 3.0 1.9 3.0 0.4 Device Marking XXXXXXX ISOCOM Isocom Part Number Manufacturer XXXX Date Code (XX year XX week) For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 7 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Hermetic Optocoupler Options Option 10 Description Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial hi-rel product in 8 and 16 pin DIP 4.32 (0.17) Max 0.51 (0.02) Min 1.14 (0.045) 1.40 (0.055) 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) Max 4.32 (0.17) Max 0.51 (0.2) Min 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) Max 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) 1.14 (0.045) 1.40 (0.055) 20 30 Solder Dip option Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on commercial and hi-rel product in 8 and 16 pin DIP. 4.57 (0.18) Max 0.51 (0.02) Min 2.29 (0.9) 2.79 (0.11) 5 deg 4.57 (0.18) Max Max 0.51 (0.02) Min 2.29 (0.09) 2.79 (0.11) 60 1.4 (0.055) 1.65 (0.065) 0.51 (0.02) Max 4.57 (0.18) Max 0.2 (0.008) 0.33 (0.013) 1.4 (0.055) 1.65 (0.065) 0.51 (0.02) Max 9.65 (0.38) 9.91 (0.39) Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial hi-rel product in 8 and 16 pin DIP 3.81 (0.15) Min 0.51 (0.02) Min 2.29 (0.09) 2.79 (0.11) 1.14 (0.045) 1.25 (0.049) 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) 3.81 (0.15) Max 0.51 (0.02) Min 2.29 (0.09) 2.79 (0.11) 1.02 (0.04) Typ For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 8 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Absolute Maximum Ratings Storage Temperature Operating Temperature Lead Soldering Temperature Input-to-Output Isolation Voltage -65°C to +150°C -55°C to +125°C 260°C 1.6mm from case for 10S 1500VDC 500VDC for CH300 Input Diode Forward DC Current Reverse DC Voltage Peak forward Current Power Dissipation 50mA 15mA 7V 5V 3V 2V 1.5mA 100mW 150mW 25mW For CH300 For CH300 For CSM165 For CS224 10µS duration Derate linearly above 100°C at 1.6W/°C. For CD500/501 andCSM165. Derate linearly above 100°C at 1.4W/°C for CD500/501, and at 1.6 W/°C for CSM165 For CH300 Output Transistor Collector-Emitter Voltage Emitter-Collector Voltage Collector-Base Voltage Collector Current Collector Current Power Dissipation 50V 30V 35V 7V 70V 35V 50mA 20mA 100mA 100mW 150mW BVCEO For CH300 For CS224 BVECO BVCBO For CS200/201 and CS224 For CS224 For CH300 t = 1mS For CH300. Derate linearly above 100°C at 1.4W/°C For CS200/201, CS224, CD500/501 and CSM165. Derate linearly above 100°C at 1.4W/°C For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 9 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Electrical Characteristics TA = 25°C U.O.S. (each channel where appropriate). Input Diode Electrical Characteristics Parameter Forward Voltage Symbol VF Reverse Breakdown Voltage Reverse Current Capacitance VR Test Conditions IF = 10mA IF = 10mA, TA = 125°C IF = 10mA, TA = -55°C IR = 0.1mA IR CIN VR = 3V V = 0, f = 1MHz Device Min 0.7 0.7 0.7 5 Type 1.18 1.10 1.29 - Max 1.8 1.8 1.8 - Units V (note 4) - 25 100 - µA pF 40 30 - - V V Output Detector Electrical Characteristics Collector-Emitter Breakdown Voltage (See note 1 below) Collector-Base Breakdown Voltage (See note 1 below) Emitter-Collector Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Emitter Leakage Current BVCEO IC = 1mA BVCBO IB = 0.1mA 70 - - V BVECO IE = 0.1mA 7 - - V BVEBO IB = 0.1mA 5 - - V ICEO VCE = 20V, IF = 0, VCE = 15v IF = 0 VCE = 20V, IF = 0, TA = 125°C - 6 8 100 100 µA µA 50 100 50 50 35 - - % - - 0.4 - 3 1011 - 250 0.3 0.9 0.25 5 - CH300 CSM165 Coupled Electrical Characteristics DC Current Transfer Ratio (See note 3) IC/IF Optical Crosstalk Collector-Emitter Saturation Voltage ICEOX VCE (Sat) Input to Output Capacitance Input to Output Resistance Isolation Voltage CIO RIO VIO Delay Time Rise Time Storage Time Fall Time Turn -on Time Turn-off Time Notes: td tr ts tf ton toff IF = 10mA, VCE = 5V IF = 10mA, VCE = 5V, TA = 125°C IF = 10mA, VCE = 5V, TA = -55°C IF = 10mA, VCE = 5V; TA = -55°C-125°C VCE = 15v, , IF2-4 = 10mA. IF = 10mA, IC = 2.5mA IF = 10mA, IC = 10mA IF = 2mA, IC = 0.2mA VIO = 0, f = 1mhz (See note 2 below) VIO = 500V (See note 2 below) (See note 2 below) CS201 CS201 CS201 CSM165 CSM165 CH300 1500 CH300 VCC = 5V, IC = 2mA RL = 100Ohms VCC = 5V, If = 5mA RL = 1KOhms 500 - 4.0 5.0 0.7 5.0 9 25 µA V pF Ω VDC µS µS µS µS µS µS 1. BVCEO and BVCBO can be selected to suit customer specifications. 2. Measured between input when leads 1, 2 and 3 are shorted together and output when leads 4, 5 and 6 are shorted together. 3. A higher CTR can be selected to suit customer specification as a standard part. 4. For Radiation Tolerant VF max = 2.0v 5. Parts of the same family will have the same specifications ie. CSM165 will be the same as CSM166 For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 10 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Electrical Characteristics For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 11 of 12 QC 88000-C001: 2013 ® ISOCOM LTD Switching Time Characteristics For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 12 of 12 QC 88000-C001: 2013