VSSB410S www.vishay.com Vishay General Semiconductor Surface Mount Trench MOS Barrier Schottky Rectifier FEATURES • Low profile package TMBS® • Ideal for automated placement • Trench MOS Schottky technology • Low power losses, high efficiency • Low forward voltage drop • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DO-214AA (SMB) TYPICAL APPLICATIONS For use in low voltage, high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. PRIMARY CHARACTERISTICS Package DO-214AA (SMB) IF(AV) 4.0 A VRRM 100 V IFSM 80 A EAS 50 mJ VF at IF = 4.0 A 0.61 V TJ max. 150 °C Diode variations Single die MECHANICAL DATA Case: DO-214AA (SMB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test per Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL UNIT V4B Device marking code Maximum repetitive peak reverse voltage VSSB410S VRRM 100 V (1) 4.0 IF (2) 1.9 Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 80 A Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH EAS 50 mJ Peak repetitive reverse current at tp = 2 μs, 1 kHz, TJ = 38 °C ± 2 °C IRRM 1.0 A Operating junction and storage temperature range TJ, TSTG -40 to +150 °C Maximum DC forward current IF A Notes (1) Mounted on 14 mm x 14 mm pad areas, 1 oz. FR4 PCB (2) Free air, mounted on recommended copper pad area Revision: 05-Nov-13 Document Number: 89140 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSSB410S www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER IR = 1.0 mA Breakdown voltage MAX. UNIT VBR 100 (minimum) - V 0.68 0.77 0.61 0.69 TA = 25 °C 1.5 - μA TA = 125 °C 1.2 - mA 7.0 250 μA 3.6 20 mA 230 - pF TA = 25 °C VF (1) TA = 125 °C VR = 70 V Reverse current IR (2) TA = 25 °C VR = 100 V Typical junction capacitance TYP. TA = 25 °C IF = 4.0 A Instantaneous forward voltage SYMBOL TA = 125 °C CJ 4.0 V, 1 MHz V Notes (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL VSSB410S RJA (1) 120 RJM (2) 15 UNIT °C/W Notes (1) Free air, mounted on recommended PCB 1 oz. pad area. Thermal resistance R JA - junction to ambient (2) Units mounted on PCB with 14 mm x 14 mm copper pad areas. R JM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE VSSB410S-E3/52T 0.096 52T 750 7" diameter plastic tape and reel VSSB410S-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.2 D = 0.5 D = 0.8 D = 0.3 2.8 4.0 Average Power Loss (W) Average Forward Rectified Current (A) 5.0 4.5 3.5 3.0 2.5 2.0 1.5 1.0 D = 1.0 2.0 D = 0.1 1.6 T 1.2 0.8 D = tp/T 0.4 TM Measured at Terminal 0.5 D = 0.2 2.4 tp 0 0 0 25 50 75 100 125 150 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 TM - Mount Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 05-Nov-13 Document Number: 89140 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSSB410S www.vishay.com Vishay General Semiconductor 1000 10 TA = 100 °C TA = 125 °C 1 100 TA = 25 °C 0.1 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 1000 10 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TA = 150 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TA = 150 °C TA = 125 °C 1 TA = 100 °C 0.1 0.01 TA = 25 °C 0.001 20 30 40 50 60 70 80 90 100 10 1 0.01 0.0001 10 Junction to Ambient 100 0.1 1 10 100 t - Pulse Duration (s) Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.096 (2.44) 0.084 (2.13) 0.220 REF. 0.008 (0.2) 0 (0) 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) Revision: 05-Nov-13 Document Number: 89140 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000