VT1080S-E3, VFT1080S-E3, VBT1080S-E3, VIT1080S-E3 www.vishay.com Vishay General Semiconductor Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.52 V at IF = 5 A FEATURES TMBS ® • Trench MOS Schottky technology TO-220AB ITO-220AB • Low forward voltage drop, low power losses • High efficiency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 2 3 1 1 2 3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VFT1080S VT1080S PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 3 TO-263AB PIN 2 TYPICAL APPLICATIONS For use in high frequency converters, switching power supplies, freewheeling diodes, OR-ing diode, DC/DC converters and reverse battery protection. TO-262AA K K • Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AB, ITO-220AB, and TO-262AA package) MECHANICAL DATA A NC 1 VBT1080S 3 VIT1080S NC K HEATSINK A 2 PIN 1 PIN 2 PIN 3 K Case: TO-220AB, ITO-220AB, TO-263AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: As marked PRIMARY CHARACTERISTICS Mounting Torque: 10 in-lbs maximum IF(AV) 10 A VRRM 80 V IFSM 100 A VF at IF = 10 A 0.60 V TJ max. Package Diode variations 150 °C TO-220AB, ITO-220AB, TO-263AB, TO-262AA Single die MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VT1080S VFT1080S VBT1080S VIT1080S UNIT Maximum repetitive peak reverse voltage VRRM 80 V Maximum average forward rectified current (fig. 1) IF(AV) 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 100 A Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH EAS 110 mJ Peak repetitive reverse current at tp = 2 μs, 1 kHz, TJ = 38 °C ± 2 °C IRRM 1.0 A Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Operating junction and storage temperature range VAC 1500 V TJ, TSTG -55 to +150 °C Revision: 11-May-16 Document Number: 89165 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VT1080S-E3, VFT1080S-E3, VBT1080S-E3, VIT1080S-E3 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Breakdown voltage IR = 10 mA IF = 5 A Instantaneous forward voltage IF = 10 A IF = 5 A IF = 10 A VR = 80 V Reverse current SYMBOL TYP. MAX. UNIT VBR 80 (minimum) - V 0.57 - 0.67 0.81 0.52 - 0.60 0.70 20 600 μA 10 20 mA TA = 25 °C TA = 25 °C VF (1) TA = 125 °C TA = 25 °C IR (2) TA = 125 °C V Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL VT1080S VFT1080S VBT1080S VIT1080S UNIT RJC 2.2 5.5 2.2 2.2 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE Tube TO-220AB VT1080S-E3/4W 1.88 4W 50/tube ITO-220AB VFT1080S-E3/4W 1.73 4W 50/tube Tube TO-263AB VBT1080S-E3/4W 1.36 4W 50/tube Tube TO-263AB VBT1080S-E3/8W 1.36 8W 800/reel Tape and reel TO-262AA VIT1080S-E3/4W 1.43 4W 50/tube Tube Revision: 11-May-16 Document Number: 89165 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VT1080S-E3, VFT1080S-E3, VBT1080S-E3, VIT1080S-E3 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Resistive or Inductive Load Instantaneous Reverse Current (mA) Average Forward Current (A) 12 V(B,I)T1080S 10 8 VFT1080S 6 4 2 0 0 25 75 50 100 125 150 175 TA = 125 °C TA = 100 °C 1 0.1 TA = 25 °C 0.01 0.001 20 30 40 50 60 80 70 90 100 Case Temperature (°C) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 10 000 Junction Capacitance (pF) D = 0.2 6 5 D = 1.0 D = 0.1 4 T 3 2 1 D = tp/T 2 4 6 8 1000 100 tp 10 0.1 0 0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 D = 0.5 D = 0.3 7 Average Power Loss (W) TA = 150 °C 10 Percent of Rated Peak Reverse Voltage (%) 8 10 12 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 100 TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 10 Junction to Case VFT1080S V(B,I)T1080S 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 11-May-16 Document Number: 89165 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VT1080S-E3, VFT1080S-E3, VBT1080S-E3, VIT1080S-E3 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) 0.380 (9.65) 0.404 (10.26) 0.384 (9.75) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.104 (2.65) 0.096 (2.45) 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 2 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 0.603 (15.32) 0.573 (14.55) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 7° REF. 0.076 (1.93) REF. 45° REF. 0.600 (15.24) 0.580 (14.73) 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.161 (4.08) 0.139 (3.53) ITO-220AB 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 0.250 (6.35) MIN. 30° (TYP.) (REF.) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.510 (12.95) 0.470 (11.94) 0.401 (10.19) 0.381 (9.68) 0.350 (8.89) 0.330 (8.38) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) NC K A 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 11-May-16 Document Number: 89165 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000