1 7+58 .0A$;,$/6,/,&21RECTIFIERS - 0V- 100V DO- 41 PACKAGE 1 FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability * RoHS product for packing code suffix "G", Halogen free product for packing code suffix "H" . * 0RLVWXUH6HQVLWLYLW\/HYHO DO-41 MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208* guaranteed Mounting position: Any Weight: $SSUR[LPDWH0.33 gram .034(0.90) .028(0.70) 1.00(25.4)MIN. * * * * * .205(5.21) .165(4.19) 1.00(25.4)MIN. .117(2.97) .080(2.00) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) SYMBOL 1N4001 1N4002 1N4003 1N4006 1N4007 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Typical Thermal Resistance Operating and Storage Temperature Range 1N4004 1N4005 Volts IO 1.0 Amps I FSM 30 Amps CJ 15 R θJA / R θJC T J , T STG 50 / 18 -65 to + 175 pF 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 oC Maximum Full Load Reverse Current Average, Full Cycle o .375” (9.5mm) lead length at T L = 75 C Maximum Reverse Recovery Time (Note 2) SYMBOL VF IR Trr 1N4001 1N4002 1N4003 1N4004 1.1 5.0 50 1N4005 1N4006 1N4007 UNITS Volts uAmps 30 uAmps 2 us NOTES: 1.Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2013-0 WILLAS ELECTRONIC CORP. 1 .0A$;,$/6,/,&21RECTIFIERS - 0V- 100V DO- 41 PACKAGE 2013-0 7+58 1 WILLAS ELECTRONIC CORP. 1 7+58 .0A$;,$/6,/,&21RECTIFIERS - 0V- 100V DO- 41 PACKAGE 1 Ordering Information: Device PN Part Number -E(1)G(2)-WS Part Number -F(1)G(2)-WS Part Number -B(1)G(2)-WS Packing Tape Pitch:26.0±0.5mm & Ammo Packing:3Kpcs/box Tape Pitch 52.4±0.5mm,& Ammo Packing:3Kpcs/box Bulk Packing: 1Kpcs/Box Note: 1. Packing code, E, F Tape pitch specifications & Ammo Packing; B: Bulk Packing. 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2013-0 WILLAS ELECTRONIC CORP.