Dϭ THRU Dϳ ϭ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ŝůŝĐŽŶZĞĐƚŝĨŝĞƌƐͲϱϬsΕϭϬϬϬs PRIMARY CHARACTERISTICS SMA-P(DO-214AC) VRRM 50V~1000V I(AV) 1.0A VF 1.1V TRR 2.5 µS TJ,Max 150℃ ● Body Marking : Mx x : 1~7 Ex : M7 Marking : M7 M7 Cathode Band Marking Code FEATURES - 1000mW + PD PACKAGE MECHANICAL DATA For surface mounted applications Case：Molded plastic,SMA-P(DO-214AC) Low profile package Polarity：As Above Marked Built-in strain relief Terminals :Plated terminals, solderable Easy pick and place Low forward voltage drop Plastic package has Underwriters per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant Laboratory Moisture Sensitivity Level 1 MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS / MARKING CODE Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage o Maximum Average Forward Rectified Current at T A = 75 C M1 50 M2 100 M3 200 M4 400 M5 600 M6 800 M7 1000 VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts IO Amps I FSM 30 Amps (Note 2) RθJL (Note 3) Rθ JA CJ TJ 30 70 15 -55 to + 150 T STG -55 to + 150 Typical Junction Capacitance (Note 1) Operating Junction Temperature Range Storage Temperature Range Maximum Reverse Recovery Time (Note 4) SYMBOL CHARACTERISTICS M1 M2 VF Maximum Full Load Reverse Current, IR o @T A = 25 C 0 0 @T A = 125 o C M3 M4 C/ W C/ W pF 0 C C µS 0 2.5 TRR Maximum Forward Voltage at 1.0A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage Volts 1.0 Peak Forward Surge Current IFSM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Thermal Resistance UNITS VRRM M5 M6 M7 UNITS 1.1 Volts 30 uAmps 5.0 uAmps uAmps 50 NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. Thermal resistance junction to terminal 6.0mm 2 coppeer pads to each terminal. 3. Thermal resistance junction to ambient, 6.0mm 2 coppeer pads to each terminal. 4. Reverse Recovery Test Conditions. IF=0.5A,IR=1A,IRR=0.25A. 2015.12 www.willas.com.tw Rev.V04B ϭ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ŝůŝĐŽŶZĞĐƚŝĨŝĞƌƐͲϱϬsΕϭϬϬϬs Dϭ THRU Dϳ CASE TEMPERATURE, (oC) 2015.12 www.willas.com.tw Rev.V04B Dϭ THRU Dϳ ϭ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ŝůŝĐŽŶZĞĐƚŝĨŝĞƌƐͲϱϬsΕϭϬϬϬs SMA-P(DO-214AC) Outline Drawing .181(4.60) .160(4.06) .075(1.90) .112(2.79) .043(1.10) .096(2.45) .091(2.31) .067(1.70) .059(1.52) .030(0.76) .010 Max. (0.25) .208(5.30) .188(4.80) Dimensions in inches and (millimeters) Rev.C 2015.12 www.willas.com.tw Rev.V04B ϭ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ŝůŝĐŽŶZĞĐƚŝĨŝĞƌƐͲϱϬsΕϭϬϬϬs Suggested Soldering Pad Layout Dϭ THRU Dϳ SMA .059(1.50) .085(2.16) .098(2.50) Dimensions in inches and (millimeters) 2015.12 www.willas.com.tw RevA Rev.V04B Dϭ THRU Dϳ ϭ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ŝůŝĐŽŶZĞĐƚŝĨŝĞƌƐͲϱϬsΕϭϬϬϬs Reel Taping Sepecification - Surface Mount Device Reel Packing PER REEL REEL DIA BOX SIZE PER BOX CARTION PER CARTION GROSS WEIGHT EA (m/m) (m/m) EA (m/m) EA (Kg) SMA 5,000 330 340*340*40 10,000 355*360*350 80,000 15.0 SMB 3,000 330 340*340*40 6,000 355*360*350 48,000 13.6 SMC 3,000 330 340*340*40 6,000 355*360*350 48,000 18.5 PACKAGE Note. Packing tape color : It's contains colorless & Black. 2015.12 www.willas.com.tw Rev.V04B ϭ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ŝůŝĐŽŶZĞĐƚŝĨŝĞƌƐͲϱϬsΕϭϬϬϬs Dϭ THRU Dϳ Ordering Information: Device PN Part Number -T(1)G(2)-WS Packing Tape & Reel Packing :5000pcs/Reel Note: 1. Packing code, T: Tape & 13” Reel Packing; 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.12 www.willas.com.tw Rev.V04B