Edco SRA64 Series Installation Manual (IO-50125)

Surge Protection
For Business-Critical ContinuityTM
Edco SRA64 Series
1 Pair Data/Signal
The Edco SRA64 Series surge suppressor is a single pair cube implementing three-stage
hybrid technology. This cube addresses over voltage transients with gas tubes and
silicon avalanche components. In addition, sneak and fault currents are mitigated with
resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when
over-currents exceed safe levels. A normal state resumes when over-currents are
removed. The ability to self restore in this manner significantly increases suppressor
performance and survivability.
The standard Edco SRA64 second stage clamps are placed from each signal line-toground. In certain cases, where ground potentials vary from site-to-site, a line-to-line
only second stage clamp may be preferred. This variation is specified by a suffix “D”
on the part number. In other cases, line-to-line and line-to-ground second stage clamps
may be preferred. This variation uses an “X” suffix on the part number.
A variety of clamping voltages are available as standard. Reference the “How to
Specify the Appropriate Model” section to insure that a complete part number
description is obtained.
Edco SRA64 Series
10kA (8 x 20 µs)
Response Time
<1 nanosecond
Voltage Clamp
8, 15, 20, 30, 36, 43, 50, 60, or 270
Temperature
Weight
Dimensions
Mounting Stud (standard)
Warranty
voltage signal lines
Sneak/fault current protection
Total Peak Surge Current
Resistance
Lightning protection for balanced low
Multi-stage protection
General Technical Specifications
Part Number
Features
5! (typical)
-40°C to+85°C
2 oz.
1.15" Cube
No.10-32 x 1/2"
5 years
Caution
The hybrid design of this product includes series resistance. Do not place this product in service on
any signal lines capable of supplying more than 150?milliamperes continuously
Differential and common
mode protection
Automatic recovery
Fast response time
Flame retardant epoxy encapsulated
5 year warranty
How to Specify the Appropriate Model
SRA64C VOLTAGE CLAMP
8 Volts
15 Volts
20 Volts
30 Volts
36 Volts
43 Volts
50 Volts
60 Volts
*270 Volts
0
0
0
0
0
0
0
0
2
0
1
2
3
3
4
5
6
0
8
5
0
0
6
3
0
0
0
D
no suffix
stage 2 clamp
each line-to-ground
stage 2 clamp
line-to-line only
X
stage 2 clamp line-to-line
and each line to ground
*Not UL Listed
Wiring Assignments
WHITE
BLACK
FIELD SIDE
(Outside Plant)
ELECTRONICS SIDE
(Equipment)
SRA64 Series
BLACK/RED
Emerson Network Power.
The global leader in enabling
Business-Critical ContinuityTM.
WHITE/RED
AC Power
Embedded Computing
Outside Plant
Racks and Integrated Cabinets
Connectivity
Embedded Power
Power Switching & Control
Services
DC Power
Monitoring
Precision Cooling
Surge Protection
Emerson Network Power Contact information
www.emersonnetworkpower.com
Headquarters
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: [email protected]
IO-50125 2/11 Rev. 3 Printed in USA
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power
logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co.