Surge Protection For Business-Critical ContinuityTM Edco SHA 1210 120 VAC Single Phase The Edco SHA-1210 filtering surge protector absorbs power line noise and switching transients that other suppressors and RFI filters pass through. The Edco SHA-1210 can replace the RFI filter when high attenuation of noise above 25 MHz is not required. If random time-base, memory loss, or other problems are affecting some of your intersections, this state-of-the-art protector can be of great benefit when properly installed. General Technical Specifications Operating Voltage 120VAC Clamping Voltage 395VAC Operating Current 10A Peak Surge Current Operating frequency 32.5 kA/Mode, 39 kA/Phase, 65 kA/Total 60 dB typ SPD Technology MOVs w/L-C Filter Connection Type Operation Temperature Dimensions (Inches) Weight Multi-stage hybrid design 60 dB maximum noise filtering 47-63Hz EMI Attenuation Modes of Protection Features Nanosecond response time Incorporates series choke L-N, L-G, N-G 1/4-20 Stainless Steel Stud -40°C to +85°C 2.375H x 3.125W x 7.125L 2 lbs. 5 Year Warranty Installation Mounting Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. AC Power Embedded Computing Outside Plant Racks and Integrated Cabinets Connectivity Embedded Power Power Switching & Control Services DC Power Monitoring Precision Cooling Surge Protection Emerson Network Power Contact information www.emersonnetworkpower.com/surge Headquarters Surge Protection 100 Emerson Parkway Binghamton, NY 13905 T: (607) 721-8840 T: (800) 288-6169 F: (607) 722-8713 E: [email protected] IO-50150 11/10 Rev. 0 Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.