Edco SHP Series Installation Manual (IO-50153)

Surge Protection
For Business-Critical ContinuityTM
Edco SHP Series
120 VAC and 240 VAC Single Phase Modular Filter
The Edco SHP Series hybrid design exhibits performance levels unattainable with
simple “shunt type” protectors. The two active clamp stages, large inductor and
shunt capacitance effectively halt high rate-of-rise surge waveforms, thus preventing initial voltage overshoot.
Flexibility of installation is another design feature of the Edco SHP Series. The protector first and second stages are electrically separate (line side) for use in jurisdictions that require a line filter between stages.
In addition, the first stage provides protection from MAIN NEUTRAL to GND as
well as MAIN LINE to GND. This is an often overlooked feature which becomes significant in locales where NEUTRAL must be kept separate from earth ground
inside the cabinet.
Features
General Technical Specifications
Part Number
SHP300-10
SHP400-10
Operating Voltage
120VAC
240VAC
Clamping Voltage
395VAC
650VAC
Operating Current
10A
Peak Surge Current
58.5kA (8 x 20 µs)
Operating frequency
47-63Hz
EMI Attenuation
70 dB typ
SPD Technology
MOVs w/L-C Filter
Modes of Protection
L-N, L-G, N-G
Status Indication
NA
Connection Type
1/4-20 & 10-32 SS Stud
Operation Temperature
Dimensions (Inches)
Weight
-40°C to +85°C
1.8H x 2.875W x 5.3L
1 lb
Multi-stage hybrid design
Incorporates series choke
120 VAS and 240 VAC Single Phase
Nanosecond Response Time
Blocks High Energy Surges
5 year warranty
Installation
1. This product could become
excessively hot and rupture in the
rare event of power line conditions
or surge that exceed its rated operating specification. Appropriate
precautions should be exercised.
2. High voltages are present on
electrical termination. Unit should
be serviced by qualified personnel
only.
Mounting
Emerson Network Power.
The global leader in enabling
Business-Critical ContinuityTM.
AC Power
Embedded Computing
Outside Plant
Racks and Integrated Cabinets
Connectivity
Embedded Power
Power Switching & Control
Services
DC Power
Monitoring
Precision Cooling
Surge Protection
Emerson Network Power Contact information
www.emersonnetworkpower.com/surge
Headquarters
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: [email protected]
IO-50153 11/10 Rev. 0
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power
logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.
Similar pages